Question 1

I’ve set up the whole thing and have plugged power into the adapter but my monitor says there is no hdmi signal coming from the device. How do I fix

Accepted Answer

Please confirm you changed it from RGB to Component output otherwise it wont work. You need to follow the instructions EXACTLY as below.

Once you do this once, you never need to do it again
================================================

Step 1) Connect your PS2 using the standard AV or SCART cable to a
compatible TV. If your TV does NOT support a ‘Scart’ or a ‘Red/White/
Yellow; connection, then you must find a suitable TV to use for just one time
until this change has been carried out. If you don’t have access to a ‘Scart’
or ‘Red/White/Yellow’ compatible TV, then please skip directly to Step 9)

Step 2) Start the PlayStation2 with no games in the CD/DVD tray.
Once the main menu loads, go into the System Configuration menu

Step 3) Keep pressing down on the D-PAD until
you see: Component Video Out

Step 4) The setting needs to be changed from ‘RGB’ to:
Y Cb/Pb Cr/Pr

Step 5) Make sure this setting is changed and is NOT left on RGB.
Please verify it has changed by restarting the console and going
back to the setting and assuring it is still on: Y Cb/Pb Cr/Pr
An example of the setting
being changed is shown right:

Step 6) Exit the menu and turn off the PS2.

Step 7) Connect the HDMI adaptor to the back of the PS2 and connect
your HDMI cable to your TV. Connect the mini-USB cable plug to the side
of the HDMI adaptor and then plug the other end of the USB Connector
to one of the PS2’s front-USB ports. Please Note: Make sure there is
nothing else connected to the PS2’s other USB port for now, as the
device requires full power from both the PS2’s USB ports for first use.

Step 8) Switch on the PS2 and verify the HDMI convertor is working.

Step 9) – This step is only required for those that don’t have a TV that
allows a ‘Scart’ or a ‘Red/White/Yellow’ connection, or alternatively
for those that no longer have an original Playstation2 AV Cable.
If you don’t have the ability to connect this way to change the
setting before first use, then follow Step 7 and connect your
HDMI adaptor to your HDMI TV in the correct method.
Switch on your PS2 with no games in the CD/DVD tray.
You must now carry out the following button sequence whilst having
a black screen and not being able to see anything. It is therefore
essential that the buttons are pressed exactly as follows:
• Press down once on D-PAD then press X
• Then press down, down, down, then X
• Press right on the D-PAD, and then X
If you did everything correctly, the image should now
display on the screen using the HDMI adaptor.

Please don’t forget to change this setting before
first-use otherwise it will NOT work.

If for some reason the adaptor is still not working on boot-up, try changing
the USB connector to the other USB port on the front of the PS2.

Question 2

How do you change the setting on the Ps2 if you cannot get the console set up to your hdmi TV to do so before hand?

Accepted Answer

Very good question. You will need to press the sequence of buttons on your controller whilst blind (as there will be no image on the TV). If you do this in the correct sequence and then reset the console, it will work. Its about 7 button presses I think from the top of my head. Do you have the sequence? Thanks, Kaico

Question 3

does this cable cause  frame rate issues?

Accepted Answer

It's the console and game that determines the frame rate not the dongle.  It works really well, the only issue is how your modern TV upscales the image.  On some tvs the image will look soft.  It works best with games that have a progressive 480p option.  Which on ps2 is only a few games.  Maybe 150 or so.

Question 4

Does this work with a ps2 slim?

Accepted Answer

Yes. I'm using it to connect my PS2 Slim to a PC monitor. Works very well with a decent picture quality.

ASIN	B06XBV1L8Q
Best Sellers Rank	319 in PC & Video Games ( See Top 100 in PC & Video Games ) 3 in PlayStation 2 Accessories
Brand Name	Kaico
Colour	Black
Compatible Devices	PlayStation
Connector Type	Component, HDMI
Country of Origin	China
Current Rating	1 Amps
Customer Reviews	4.2 4.2 out of 5 stars (2,977)
EU Spare Part Availability Duration	10 Years
Global Trade Identification Number	07426819482005
Input Voltage	5 Volts (DC)
Item Dimensions	7 x 3.5 x 1.5 centimetres
Manufacturer	Kaico
Manufacturer Part Number	PS2 to HDMI Passthrough
Model Number	PS2 to HDMI Passthrough
Number of Items	1
Number of Ports	1
Package Quantity	1
Power Plug Type	No Plug
Product Finish Type	Matte
Product Warranty	1 Year Manufacturer
Specific Uses For Product	TV
Unit Count	1.0 count
Warranty Type	Limited

Kaico PS2 to HDMI Adapter for PlayStation 2, Plug & Play HDMI Converter | Supports 480i, 480p, 576i, 576p and 1080i output, with built-in audio, Micro USB power cable, and 12-month support

Details

Details

Description

Specifications

Common Questions