MelonBoat 24 Pack Chair Leg Floor Protectors, Fit Square Leg 1-1/2 to 1-5/8 inches, Chair Leg Caps with Furniture Felt Slider Glide Pads, A-SQ040, Fit Square Leg 1.55''-1.63''

Who would have thought that chair leg floor protectors could be life-changing, but here we are. Prior to purchasing these I had attached adhesive felt floor protectors on my wooden kitchen chairs. I have cheap laminate flooring in my kitchen and the chairs. They frequently scratch, scrape, and catch on the floors making it a chore to pull the chairs in and out from the table. The felt was a dust collector, hair collector, and frequently fell off rendering them useless after a few months.Since purchasing these silicone floor protectors, my chairs glide smoothly on the floor like butter. They are flexible silicone and have pre-cut slats along all four borders which help them conform to the legs of the chairs. As shown in the picture my chairs have curved ends and I was afraid that these wouldn’t work, but the way they are made they fit and conform perfectly to the legs. They have a solid cork and felt bottom that works very well and has held up so far over several months. I have two rambunctious children who frequently are rough with these chairs and the floor protector has only come off once on one chair after roughly being lifted off of the ground. Great value and highly recommended.

We have a nice, new hardwood floor that I didn't want scratched. It is a hand planed solid wood flooring that I felt could easily get scratched due to the many undulations in the wood. The chairs for our dining room set had nice plastic bottom slides, and they hadn't scratched the floor yet, but I wasn't willing to risk them scratching the floor.These glide as easily, or better than the plastic ones our chairs came with. The felt bottom is nice because it also doesn't attract dog hair (we have 2 dogs that shed) much. When I had measured, I took the measurements of the back chair legs. They were right at the maximum designed fit for the floor protectors that I bought. They went on EASILY.Unfortunately, I had not measured the front ones, and they were smaller! Lucky me, the floor protectors actually fit them too! They are the minimum recommend size for these. The only difference is that there is a cut on the sides that splits if the measurement is on the larger size - if they are the minimum measurement, then they don't. Neither ones on the front or back legs of the chairs fall off or move around.Overall, these are excellent, and I do not hesitate to buy more in the future (and I will once we get more chairs).

Purchased 4/1/2019 just replaced 6/28/2021. We used to apply the round felt pads with the adhesive and we had to replace those every few months. The felt on these was still good after over 2 years of use in our kitchen. We usually eat all 3 meals a day sitting in these chairs and the silicon stretched a little on one it started to slide off after 24 months of daily use. I can’t believe the felt and that the silicon that grips lasted so long just a great product for our chairs.

My sister gave me these heavy metal chairs and we have wood floors we have to protect. She bought these cheap stick on felt protectors. They did NOT stick very well, except to the floor. I remembered seeing some kind of slip on chair leg protectors. So I looked them up on Amazon and found these. They are wonderful. They seem very durable. They are a somewhat soft cushiony plastic, that is easy to put on the chair legs. Cheap solution that saves my floors. And they slide so nice now.

The legs on my chairs all have slightly different size/shape to them (see pix). But somehow these end caps fit them all nice and snug. This is because there's a notch on each side of these caps and the plastic material is malleable. Luckily not a hard plastic that I initially thought they might be and may have to force onto these chair legs. Quite the opposite. It was easy peasy getting them on. I am extremely happy with this purchase and wish I had known about this product years ago.

We have a slate tile floor. The slate is smooth but there are grout seams which, in combination with the weight of the chairs, have served to knock all the felt pads and sliders we have installed over the years in our effort to protect the floors. Nothing has worked for long!Our chairs are heavy wooden bar stools. The legs are square. The front legs are a bit smaller than the back legs, so my husband wrapped a wide rubber band around the front legs at about the height of the plastic cup. They seem to be holding on.The felt on the bottom of the protector seems a little thin. Everything depends on how well the felt glider adheres to the plastic leg cup when we slide the chair in and out. The next week or so will tell the tale.

Some time ago, I had found another version of these (round) at an outlet store and rigged them onto my square chair legs. They were fine for a while, but had started to split so I needed replacements. I was very happy to come across these! They fit perfectly! I paired them with felt furniture pads (these on the front legs and the pads on the back). Now my dining chairs glide across my breakfast room tile floor without the sounds of scratching and scraping that I had been dealing with. Time will tell how durable they prove to be, but I am very happy now and recommend these floor protectors.

Fit was perfect as advertised and liked the felt underpads