LASFITT3 7440 7443 LED Bulb Brake Tail RED 7444 Light CANBUS Error Free New Extremely Bright 7444na 7441 7440NA W21W WY21W with Built In Resistor Anti Hyper Flash(2pcs)

Super bright and easy install. Works just like stock with no hyper flash and matches the other LED turn signals in my limited. Looks really modern and eliminates the "fried egg" effect because the bulb appears white in the housing.

These worked perfectly in my 2020 Toyota Tacoma. I had to buy two pairs since my tail lights have 4 bulbs total (2 for each side) which made my total investment north of $100 for some light bulbs. Do I feel it was worth it? YES! These are exceptionally bright with a perfect red color temperature such that they look OEM but also look much better than the stock bulbs at the same time. You get snappy on and off for your turn signals and your brake lights. I have experienced zero warning lights on the dash and no hyper flash. They truly do seem to be completely plug and play.PLEASE NOTE THAT MY TRUCK IS EQUIPPED WITH THE FACTORY LED FRONT LIGHTING PACKAGE THAT GIVES ME ALL LED LIGHTS UP FRONT, this could be why I have no hyper flash but I suspect it’s just because these are fantastic LED light bulbs

Trying to replace the factory bulbs on my 2017 Cadillac with LED ones has been a nightmare. I ordered three different "compatible" bulbs before finding these. The other bulbs fit and also worked, but they gave me an error code. The turn signal would also hyperflash! After doing some research, it seemed the best solution was purchasing a pair of 6ohm Load Resistors. But I did not want to make that sort of modification to the vehicle... Long story short, these "LASFIT 7440 7443 LED Turn Signal Bulb CANBUS Error Free" worked!!! I did not need the load resistors. These do NOT cause the hyperflash either. They are basically plug-and-play. Granted, these bulbs are much more expensive than I hoped for, but they worked. They are super bright and have a great quality. We will see how long they last. They have a one-year warranty. In the end, I would have rather paid this price than waste so much time buying/returning other bulbs.

No hyperflashing; works good on older Subarus like my 03 Baja.

Firstly, when installing the bulbs and the polarity was incorrect, pulling them out mangled the contacts as you can see in the photo. Originally I was able to straighten them out and get them to work, however less than three months later I was informed that not one but both of my brake lights were out. I sit in a lot of traffic here in atlanta but brake lights should probably last a bit longer than 3 months I think. Definitely not a fan.

These work great on a 2023 Subaru Crosstrek Premium MT.Bought this for the rear turn signal in amber.Will decide on the fronts in the future.Super bright but not blinding...The whole housing lights up.and as the title says no DTC codes...Turn signals flash as the halogen did.. !!!Time will tell on how long they will last.. !!!Support from LASTFIT (Thanks YOYO) was nothing, but AWESOME !!!

Pictured is stock on the left and the Lastfit LED on the right. HUGE difference in brightness.No hyperflash and it was as easy as simply swapping the bulbs on my late model Mazda.I held off for years upgrading my turn signals to LED because of the need of resistors. Some LED bulbs came out with resistors but they would hypersflash in a few minutes, but these bulbs are rated for 30+ minutes of use without any issue. Finally a true plug and play bulb without having to hack your cars wiring.The only reason I gave it 4 stars is because the color on the new bulbs is a lot more Yellow than Amber. The light is definitely a lot brighter, but also more yellow. (You can see this in my comparison) Not a big deal it still works.They are polarity specific so if they don't work simply flip them 180 degrees.The bulbs seem pretty high quality and tested them for a long time without any hyperflash issues. Will update if they have any premature failures but I doubt it. Expensive bulbs but they seem high quality and worth the money. Gives you that crisp LED on/off and bright lighting!

Item was delivered on time and is of good quality. The bulb are way brighter than the factory OEM bulb and has the switchback function from Amber to White which is exactly what I'm looking for. I am very pleased with my purchase and would definitely recommend.

Instalado y funcionando correctamente sin hyperflash (en conjunto con otros led de otra marca traseros sin hyperflash) en un Honda Civic 2013 en los faros delanteros, todo funciona correctamente y como se espera, claramente es mas brillante que los faros de halogeno, saludos

I bought these for my 2016 Toyota Prius C rear turn signals after I upgraded the front turn signals with the T3-7443D switchback bulbs from the T3 series. Those were also nice-looking and not obnoxiously bright. I love LED bulbs from Lasfit. They are expensive, but worth the extra money. These ones didn’t hyperflash, by the way, so I’m happy with the purchase.

Have hyperflash. One bulb didn't work at all. Need to return

I was going to return these until I found out they work but are directional, meaning if you plug them in and they're not working, flip them around. They work amazing.

Not sure if the wording for this model's marketing needs to be updated but I had these new T3 series in place, side-by-side with Lasfit's previous equivalent model (also advertised as 500% brighter...) and these are nowhere near as bright, though they are still brighter than the factory bulbs. That said they - definitely resolve the hyper flashing after 2 minutes which the old model suffered from, I had these T3s going for over 30 minutes on a hot day without issues.I guess it makes sense, they had to cut back somewhere to lower heat in such a small package, using less of the same 3030 LED chips (while paying more for this updated version!) I mean the older model was almost comically bright, lighting up everything/everyone in its path in amber, outshining my Toyota OEM LED low beams, even had complaints which was something I've never experienced before - for hazard lights.All in all I'm happy they solved my hyper flashing problem without all of the extra battery draining resistors I (unsuccessfully) tested with their old model, although still somewhat disappointed they did this removing parts at a higher price; R&D costs?Thanks to the US Lasfit support for helping figure this out even though they do not officially have Canadian presence.