ZIRO Glitter PLA Filament 1.75mm, 3D Printer PLA Filament 1.75mm, Shiny Sparkle PLA with Finer Glitter, Neatly Wound 1kg/2.2lbs Spool, Fit Most FDM 3D Printers, Midnight Gold

This is a fantastic filament at a fantastic price!I recently received a reel of this in black and I am genuinely impressed with this filament, the colours look amazing and the glitter fleck pattern is very similar to the transparent ‘Twinkling Filament’ Ziro also creates and they look amazing on their own and together!I printed this cat model as a test which turned out great, solid layer adhesion and no clogs or jams. One issue I had was that the filament snapped a few minutes into using, I believe this may have been my fault when setting the reel up in my printer however I would definitely say it would be a good idea to check this before running a print, Ziro do mention this in the important tips section of their description which I’d advise checking over.The addition of a resealable bag for the filament is also very welcome, I tend to put the filament and the silicone packet that comes in the vacuum seal both in to ensure the filament does not go funky.It looks good, prints good and for the price you really can’t beat it.This was printed on a Flashforge Creator Pro (with flexion extruders) at 220c hotend and 50c bed

Ziro filament, always good quality plus thanks for sample filaments and also cleaning filament. Nice to have extra bag included .Prints nice and easy

Okay, first thing - the colour is superb, light catches the glitter sparkles well and it does look good for some decorative print jobs. Not had a problem with bed adhesion at 60 degrees.Second thing and this is the minor problem I experienced: most print jobs using 'normal' PLA usually run at a max of around 205 and 60mm/s with a 0.4 nozzle. Looking at the blurb on the reel, they suggest a range of 190-220 degrees. I'll admit that I was almost tempted to throw this reel in the bin after numerous attempts to get a decent looking print left me frustrated. What I noticed was that at 205 degrees, the extruder was struggling because the hotend was clogging frequently. I took the reel of the CR6 max and put it on the ender 3 to do an identical job on both. The glitter was now running on the ender 3 but this time I put the first layer at 230 degrees and 220 after. No clogs and no extruder struggling.So my advice is buy this but don't heed the parameters the manufacturer suggests, up your hotend temperature to get the best out of this.

Never heard of this brand before but decided to take a chance and buy a spool of the twinkly red.. printed a test print of a fidget spinner on my bambulab P1S and it came out brilliantly.. can't wait to buy the other colour

Was a bit concerned about using this PLA after having read a few reviews talking about abrasion due to glitter particles. Despite this, it worked well by using fairly standard PLA settings. One thing to note is that the material seems to be a bit more plasticky/brittle compared to normal PLAs. I am using a standard Creality Ender 3 V2 with 2 filament guides (which I would strongly advise to mount for materials that are more rigid) and an aluminium extruder.The colour is semi-transparent and glittery... it looks great, as you can see by looking at my hairy unicorn ;)As mentioned before, I had no issues with my standard 0.4mm brass nozzle. I've used a 210C nozzle temperature and 65C bed temperature. Printing speed between 50-60 mm/s. To date, it has been performing well at different layer heights.To prevent potential abrasion, a note of warning would be to consider using a steel or hardened metal nozzle if you are planning to print a lot of models with this PLA. If you do that, you may want to test a slightly higher temperature (e.g. 215C) given the fact that non-brass nozzles tend to dissipate heat more quickly.

Say perfectly on the spool, no tangles at all. It prints very very nice, have almost used a full roll on my P1S already and have ordered another! Really nice colour, especially at this time of year. Suits Christmas prints really well

This material sticks so good didn't have any problem with it

I'd heard stories that the Bambu AMS struggled with cheaper filaments, so I was a little apprehensive loading this in to do some filament paintings.BUT....boy is it easy to print with! Lays down so well, great layer adhesion, great colour and the sparkle looks really good.I'm now ordering the blue, purple and diamond silver to add to the collection!

I use this print filament for my wife's vase and a couple other toys for my daughter and they absolutely love the color. It was easy to print with and the adhesion was good. Was easy to work with and no issues.

Excellent filament when I got it to print correctly, Had to print at 215c, fan 100% always on, first layer height 0.45mm, 65c bed in order to get it to adhere to the bed. MOST Important, this filament company stands behind their product, I emailed ZIRO support and they replied right away with lots of different ideas to try to get it to print correctly. Outstanding customer service, added to my list of filament to buy.

Gostei muito do resultado final! Ótima qualidade.

Une très belle couleur, assez foncé quand même. Il s’imprime facilement. Petit bonus de cette marque, des échantillons de leurs autres couleurs. Je recommande

Ganz tolles Filament. Von den tollen Farben mal abgesehen, 1A Druckergebnisse! Kein Stringing, tolle Layerhaftung, kein Clogging, kaum Oozing. Sieht am Ende aus, als wäre CF beigemischt. Prima! Drucker Voron 2.4 mit Rapido 2.