UTP TUMBLE DRYER MOTOR CAPACITOR 7UF for CANDY HOOVER

Works perfectly on my 2022 Hoover H-Dry 300, model: HLE C10 DCE 80. Symptom was the machine was humming but did nothing. The washing machine is a really bad design but I managed it by resting it on its back, removing the lower right cover (3 screws), then pulled out the circular disc which covers the fan, then using a 10mm socket on a long extension bar, remove the fan nut followed by the fan. Leave the split washer on the shaft as no need to remove it. Next, remove the fan cowl - this is a nightmare and doesn't quite fit through the gap so needs squeezing and pulling over to the left. The tricky bit now is to use a 13mm socket on a long extension bar to get the 13mm nut for the capacitor loose. I forced over the spring tensioners to expose the nut which requires a lot of force. Then you can carefully use your fingers to remove it and the serated washer. Make sure the capacitor is discharged by shorting the 2 terminals (blue and brown wires) with an insulated screwdriver or similar. It will most likely have zero charge anyway. I then held the capacitor and used a very long flat-head screwdriver to lever of the 2 spade connectors. Probably would have been easier to remove the drum.

works as it should, good quality, and comes with a spare nut and bolt

This was a godsend for a faulty tumble dryer , decent replacement capacitor

Did exactly what I needed.

I replaced it in my electric dryer. It's been working for a year now. I recommend it.

Fiddly to fit but with patience and an extra pair of hands repaired my tumble dryer at a fraction of the quoted to fit and supply cost.

Saved me buying a new tumble dryer!! 10 euro and a YouTube tutorial and it was fixed.

Simply works. A bit time consuming to strip and fit, but simple.