42 Inch Nickel Low Profile Ceiling Fans with Lights And Remote | Flush mount, 3-color dimmable light, quiet reversible DC motor, easy install, memory, timer, bedroom, covered outdoor areas

This ceiling fan is a great addition to my room! It was easy to install, runs very quietly, and provides excellent airflow. The built-in LED light is bright with adjustable color temperatures, and the remote control makes everything convenient. I also love the reversible blades—they match different décor styles perfectly. Great quality and value for the price! Highly recommended.

I love this fan. It looks great, runs quietly, and moves air much better than I expected. The light is very bright, and I like that you can adjust the intensity and tone. The remote control is very convenient, and installation was easier than I imagined. It was an excellent purchase, and I would choose it again.

One of my friends has a couple fans from this line that I have observed for several years so when I was ready for new ceiling fans I immediately looked to Amico. I purchased the 30 and 42 inch fans, replacing two 36 inch. I had someone do my install and they said the instructions were well-presented and smooth install. The 30 inch is in a small kitchen and is it is powerful for its size. The 42 inch is in a bedroom. Remote is easy to use. I like the variety of blade colors to choose from. My 5 star rating is based upon the previously noted positives mentioned in this review as well as the fact that I have been using this brand fan at a friend’s home for a few years now and was happy with the performance. Price was good.

We lost our previous ceiling fans due to several power outages and they were no longer available so I ordered these fans as a replacement. The fans look nice, are low profile, and create adequate airflow. Unfortunately the list of negatives outweigh the positives. I purchased two of these fans and both have the same issues. The first problem is that, at fan speed 3 and above, the fans make an irritating clicking noise from being ever so slightly out of balance. The fans are mounted to proper ceiling fan mounting brackets. This clicking was present in 1 fan immediately, but didn't happen to the second fan until about a week later. I spent about an hour trying to balance the first fan, I've had success with fan balancing kits on past fans, but I couldn't make any considerable improvements here. The fans are very close to being balanced but even just a VERY small amount of wobble causes the clicking noise. The clicking comes from the mounting plate when it pulls away from the ceiling paint. The mounting plate is plastic and is inherently flexible. When the fan rotates the edge of the mounting plate flexes away from the ceiling, not even enough for a sheet of paper to slide between the mounting plate and the ceiling, but this is enough to produce a clicking noise when the plate separates from the ceiling paint which it very lightly sticks to. Because I was not able to resolve the clicking by balancing the fans what I ended up doing is removing the fan from the ceiling, loosening the mounting plate, and sliding parchment paper, cut into a ring shape, between the fan mounting plate and the ceiling. Neither the mounting plate or the ceiling paint stick to the parchment paper so if the mounting plate flexes away the unsticking sound isn't present. I reinstalled the fan to the mounting plate. The base of the fan surrounds the mounting plate but there is a small gap between the base of the fan and the ceiling, smaller than 1/8th inch. I carefully pressed 3/8", highly compressible, foam backer rod into the gap around the base. This really firmed up the connection to the ceiling and the clicking sounds from the imbalanced fan have been resolved. The second problem, which is the biggest issue because I cannot resolve it myself, is that the fans have a mind of their own. It took me a while to pin this down because I thought my wife may be pressing the wrong buttons on the fans wireless remotes. We keep the wall switch(normal, NOT dimmable) constantly on so that we can operate the fans using their remotes. At any given time the fans will change settings on there own. This includes speeding up, slowing down(we don't use the function that does this deliberately), the blade direction reversing, and even turning on or off on their own. We typically set the fans to run at speed 3 with the blade direction pushing air down. We live in the subtropics and one of the fans is mounted over our bed(why the clicking sound couldn't be ignored) and we open our windows at night. The fan needs to run properly through the night to stay comfortable. Frequently the fan over our bed will slow down or, even more often, reverse direction and I end up waking up in the morning sweating and uncomfortable from the lack of airflow. When the fan speeds up to speed 6 it actually wakes me up because the turbulence created at the edge of the fan blade is actually quite loud above speed 3. By the next morning the fans are almost never on the same setting as they were set to when we went to sleep. All that being said, the fans look nice, are a nice size, and quietly move a nice amount of air when they are at my desired setting. I have been using the fans for about a month and a half and probably would have tolerated the shortcomings of the fans indefinitely but now my wife is voicing complaints about the fans constantly changing settings so I figured it was time to share our experience.

I would give this five stars but I just installed it and have no experience with the reliability. However, I am very impressed with it so far. During installation I was a dismayed to see that it was mostly plastic, but it is so much lighter than the old fan, it seems a good trade off. Easy to install. The wire nuts are small to fit inside with the receiver and solid copper hose wires, but work well. The instruction booklet is finished with glossy pages and has IKEA-like picture instructions. Each section has a sentence of encouragement which appear to be the only translations from Chinese and better than most. I love the look and the fact that it is only three blades. It moves more air on low than our old five-blade with a down rod. At lower speeds, I can't even her it. At higher speeds, it sounds more like the air moving rather than the machine itself. The wind mode is an amusing option. The light is excellent. Dims to a very low level and at it's brightest is as good as our LED floor lamp. Overall, an excellent fan. Hope it lasts!

I’m very happy with this ceiling fan! It looks modern and sleek, and the black finish fits perfectly with my room. Installation was straightforward, and the remote control is very convenient. The fan is surprisingly quiet, even on the highest speed, and it provides excellent airflow. The built-in light is bright, dimmable, and the different color temperature settings make it easy to create the perfect atmosphere. Overall, this is a great value for the price. I highly recommend it!

I’m really happy with this ceiling fan. It was easy to install, runs very quietly, and the LED light is bright without being too harsh. The remote makes it easy to adjust both the fan speed and the lighting. It has a clean, modern look and fits perfectly in my room. I’ve been using it daily, and it’s been working great. Definitely a great value for the price

I ordered 2 of these fans in 2024 for bedrooms in my new home. They were easy to install and worked great. Over time, one of the motors malfunctioned causing the light to work but the fan had stopped spinning. I had messaged customer service and spoke with Mike G who was incredibly helpful. He sent me a brand new motor with no questions asked and the motor fixed the issue! The fan is sleek, quiet, and pumps out a lot of air for its smaller size. Would absolutely recommend simply for the outstanding customer service. Mike is the man!

Una vez instalado, No funciono el ventilador, tienen algún servicio de reparación o sustitución ?

تم ارجاعها واسترداد المبلغ البضاعه نفسها جميله 🙄

not suitable for the middle east because it's 120V

Solo tienen 4 meses de uso y ya se descompuso, que pena porque se veía bueno.

Do not remove your existing light fixture until you fully assemble the new one. Assembly is strait-forward but they provided the wrong light that didn't fit the base. Both items I bought had the same issue. It took two weeks to get the correct light and they only sent one. Still waiting to get the second one.