Question 1

How does this create a lightning effect, and how is it controlled

Accepted Answer

It's Lighting Transformers for LED Light. Input AC 100-240V and output DC 24V. It need additional controller for dimming.

Question 2

Will this work with a t100 soldering iron? ***To seller***

Accepted Answer

The t100 soldering iro power is DC5525 connect, our's is DC5521 connect, so need one DC5525 to DC5521 connector; our new model which with DC5525 Connect will online soon. Thanks.

Question 3

I need to replace a power adapter for led lights. need about 29 watts for total 16 led strips together.. will this work? current power adapter is 12v

Accepted Answer

This power adapter is 24v. 30watt and is DC voltage.  The led lamps in your circuit need to be 24v  or they may not last very long with the additional voltage.   Check your old 12v power supply and make sure it’s DC.   If it’s AC you’ll need to find an AC power supply.  You will see your lamps come on then in a few minutes go off and later back on if your old power supply is AC. Other than that your leds should work but be brighter and the 30watts will cover you. Remember voltage must be DC for this power unit to work correctly.  Check your old power supply it will have a label “ Output Volage: 12v or 24v AC or DC.   If yours is AC this unit isn’t the one.

Question 4

Will this power 4 malibu lights with max 10 watt bulbs.  can you put your cables in us inch's?

Accepted Answer

This power supply delivers up to 2.5 amps of current at 24 volts DC. It could handle four (4) lights at 10 watts each BUT the issue is voltage. Most outdoor lighting such as Malibu use a low voltage of 12 volts, so this power supply will supply too much voltage for outdoor low voltage fixtures and blow out the bulbs. 
Purchase a 120 VAC to 12 volt power supply. Amazon lists many. Doesn't need to be a 12 Volt DC power supply, AC will work just as well. Just make sure it has a 12 VOLT output. I would get one rated at 60 watts. They are inexpensive ($12-$15).

EMITEVERDC 24V 60WLED Power Supply 2 Packs, LED Power Adapter, Lighting Transformers, Input AC 100-240V UL-Listed,Class 2

Description

Common Questions