Eastman 3/8 Inch ID (1/2 Inch OD) PVC Clear Vinyl Tubing, 20 Foot Length, 98566

i'm using this to daisy chain condensate pumps and its working fine. its also clear so i can see if mold or anything starts to grow. would buy again if needed

fine product, fine price

This is just what you need to move the water from the condensate pump to the drain. It would be even better if it was another 5-10 ft., but it's the standard length as-is. Less expensive than Big Orange. This is my go-to. Highly recommended.

This tubing appears to be made well and true-to-size. I won't hesitate to buy it again; however, there are two packaging issues that could be improved. The tubing is packaged in a roll secured by three twist ties. The first issue is that the inner loop of the tubing is small enough that it put a kink in the tubing. Using a heat gun, I was able to straighten the kink and make that section of the hose--the last ~10 inches--usable. The second is that the size label is glued onto the tubing and left a significant amount of paper and goo stuck to the tubing when I removed it. My particular application leaves the tubing in plain sight, so paper/goo wasn't ideal. The paper and goo were easily removed with a heat gun. Even if the manufacturer doesn't address those two minor packaging issues, this vinyl tubing is still a good deal.

Very durable and flexible tubing, it has a kink resistant. Easy to plug onto the brake valves to do the bleeding. Nice compatible!

AS DESCRIBED, WILL BE USING HERE SOON. DELIVERED ON-TIME !, tku.

Purchased this for making a bottle for brake bleeding purposes and worked well. It fits well on the bleeder screw (at least on my vehicles). In case you are wondering how to make the bottle: get a 16 or 32 oz empty plastic bottle (ex: mouth rinse), drill a hole in the cap with a 5/16 drill, insert the tube all the way to the bottom, apply hot glue on the top of the cap where the tube goes in to make an air tight seal and you are done. Hopefully, you know that you can’t simply pull the tube off the bleeder screw once done.

I had not bled brakes in a while and could not find the DIY bleeder I made years ago, so I figured I would just make another one. After doing the research I determined that the 3/16 ID , 5/16 OD tubing was what I needed. This time I went with the 20ft length so that I have plenty left over for when I lose the bleeder that I just made. The tubing worked perfectly as expected, was clear as described, and was easy to move and bend without kinking or obstructing the oil flow.

Calidad intermedia

Good

great

bien

This tubing is 1/4 inch ID, 3/8 OD, so buy the correct fittings, or the correct hose.