Slick Sand Polyester Primer Surfacer for Fiberglass, Wood Surfaces & More - 128 Fl Oz

this stuff go's on thick. when you purchase a gallon of this primer, make sure you also buy some reducer with it. I had the air turned up all the way to get this stuff to spray right, wish I had the reducer. it already comes with 4 tubes of activator, one tube per quart. its great stuff to use if you have a lot of bare metal to cover. I'm restoring a 72 el camino, so I needed a good self etching primer. it went on thick, and really did a great job of covering my body work. I block sanded the car, and everything came out straight and true. I shot the car here in Arizona, and I think the temp was in the high 60s, or low 70s. make sure you wear a good respirator and eye protection. this is a very good primer for the price, and I would recommend it.

Can arrived dented, whatever. One of the hardener tubes leaked but the seller quickly sent me a replacement.

Very Controllable, High build....easy to fair and sand. Fast delivery. Well worth the purchase price. And this stuff goes a LONG way.

My 60 year old truck was heavily pitted and I wanted basically a spray on "bondo", this is it. It's the same polyester base as most fillers so it's compatible. Fairly thick so a big tip gun is recommended. With that a gallon covered just the cab with 2 coats. The stuff has an evil odor so good ventilation and respirator is mandatory. It comes with 4 tubes of activator so pouring out a quart and adding a tube is easy. Be aware that when mixed it starts to kick and expand so cap it and spray it quickly. It leaves somewhat of a coarse finish which I smeared with guide coat then sanded until that was gone leaving a nice smooth surface. It's fairly soft so it sands fast but that also means that it scratches easily. It gets harder as time goes by and after a week is about as good as urethane.

Been using this for years. Have used this under many high end paint jobs. The primer itself is great. But not sure why anyone would think one piece of paper is adequate packing for 2 gallons of primer $300 worth of primer packaged with one piece of paper.

very poorly packaged with very little cushioning. Gallon can arrived it torn box full of dents and partially crushed. What a mess. The product from is an excellent product.

DO NOT BUY!!! Primer showed up leaking everywhere! And no return policy.....it's a good primer I have used this primer before from a local shop...they just didn't have any in stock.... I'm out $160 and have a mess to try to clean up

I have been using slick sand for years on restoration projects. I fills well and sands easy. I use epoxy direct to metal then slick sand, sand down with 180/240, then use a 2k primer. hasn't failed me yet.