VEVOR Welding Cart, 3-Tier Welder Cart Heavy Duty 400 LBS Weight Capacity | 360° Swivel Wheels, 2 Tank Storage Safety Chains, Rolling MIG Welder Cart for TIG, ARC, MMA, Plasma Cutter Welding Machine

Great little welding cart... Took about an hour to assemble, drawers work well, not too cheap for a small inverter welder...

A good sturdy cart for the money. Assembly instructions are not great, but if you read through it before you start, you'll save a lot of time with taking bolts back out after they are put in and tightened. The drawers and locking compartment are nice. Paint seems to be good and thick. Holds my MIG welder and tank nicely.

This cart features two drawers, one with fixed dividers for small items, a larger drawer for larger loose items, and a "lockable" space for items like a helmet and clothing. The large rear wheels and decently-sized front casters that swivel 360⁰ allow the cart to maneuver around the shop floor and not get stuck on small bits that might be in the way. The top shelf easily holds a 200+ amp welder and a second shelf below it provides quickly accessed storage for commonly used tools, electrodes. Four sturdy hooks offer plenty of easy access for multiprocess welder guns and torches.While the large storage compartment is lockable, it uses external hinges that are held in place with small bolts that can be removed with a screwdriver, and the hinges are plastic. I wouldn't use it to securely store something without replacing the hinges and perhaps the keylock; it's fine, otherwise. 4 stars because of this.The cart ships well-packaged and arrived undamaged. There were no build issues assembling it, the instructions are clear, and the fit and finish had no issues. Assembly took under two hours, including unpacking and not rushing through the process. Vevor included extra bolts, washers, and nuts which was reassuring.Would recommend for DIY and light duty shops on a budget. This cart should easily last a generation. Well done, Vevor!

Solid unit, easy to assemble.

I don't know why the reviews are so high for this, it's OK, it's FINE.. it's good-enough. The quality is not great, the metal is thinner than I expected, the hardware (bolts/nuts) are terrible, they sheer/strip so easily. The paint is not great, laid very heavily in some areas, thinner in others, and at least on came the paint was damaged in a lot of places but that's just transit probably.

Fits nicely on my little hobby rig. Price fits the quality. I wouldn’t necessarily suggest this to a pro, but it works for my needs. Just fyi, the instructions have a mistake; the top shelf shows the wrong hole. My picture shows a bestarc 145 and plasma cutter.

Nice little Vevor 2-Tier 4 Drawer Welding Cart. It's a little small for my multi-process welder, but when I route the leads under the handle, it works just fine for the money spent. The 4 drawers are great for storing some consumables and a few items. There is also room behind the drawers to store my extra leads that aren't being used at the time. It has several hangers that are nice for hanging a helmet, power cords and leads. Super easy to put together, only took about 10 minutes. Rolls nicely and decent quality steel for the money.

I liked the amount of enclosed storage on this welding cart, so I took a chance even though it didn’t have reviews yet. The cart itself is a bit more solid than I expected it to be, and the amount of storage is GREAT! If this held a second tank, it would have been perfect for what I was looking for (without breaking the bank).It’s a flat-pack as most things are these days, and took me a while to assemble. There are a few negative things to note.1-The wheels & casters are probably the lowest quality items of this cart. Will they support the advertised 350lbs? I don’t know, maybe.2-The bolts are all Phillips heads. Tightening a nut of a Phillips bolt is not the most fun. Hex bolts would have been better imo.3-If you want the top shelf to slant like the stock photos show, the front bolt holes don’t line up. If you aren’t prepared to drill your own hole, you’ll have to mount the top shelf level.4-The build order is not the most well thought out. The worst is, they have you add the lower tank bracket at the end after the cabinet is basically fully assembled. I have long arms, so I could still reach around, but that lower tank bracket (not upper) could go on as step 1 and save effort.5-Not a big negative, but there are no janky tools for you to use while for assembly, so you’ll need a #2 Phillips (& #3 is helpful if you have one), & 10mm socket or wrench (& 7mm for door hinge hardware but is not 100% necessary). The instructions also don’t tell you what tools you’ll need. I’m assuming if you are buying a welding cart, you will at least have basic tools ;)For under 140 bucks, I’m satisfied and I’d buy it over again. If the price climbs too much higher though, I’d probably look elsewhere.

Stadig och bra svetsvagn. Lite otydlig bruksanvisning men inga problem att sätta ihop den.

A good cart would recommend it

Nice solid cart for the price

Tellement satisfaisant que j’en ai acheté 2!!!

Gestern zusammengebaut.gutes Teil für den Preis.es ist zwar ein kleine Delle drauf aber nichts schlimmes