VEVOR Dirt Bike Lift Stand 440 lbs Capacity Motorcycle Jack Lift Stand | For Dirt Pit Bike Repair, Maintenance, Dirt Bike Accessories, Hydraulic Lift Operation, with Height Adjustable Hoist Table

Update 5-21-24: I bought a second dirt bike (2023 Husqvarna FC250). A full motocross bike. The stand also works great with that. I just set the platform higher so it will just get both wheels off the ground. And then set the locking nut underneath it snugly. Works great for this bike too, so I bought a second one. And here is a tip for people: Rather than banging on the arm on the locking nut with a hammer or mallet and risk breaking off the arm.. (You want this positioned snug against the base of where the spindle comes out- to provide more stability). Instead position it so it is snug, and then rotate the platform to get it tight. I have a 21 Honda CRF250F and this stand is perfect for what I need, and at a good price. I also have a regular stand that is 17" high, and trust me, its not that fun flipping a 265 pound bike up on a 17" stand. I can usually do it, but sometime I have to do it a couple times, and then reposition it a bit after. With this stand, I can just position it under my bike and push down on the lever. So much easier! A couple tips for people: Keep the height as low as it can go and still get the bike as high as you need. For my bike, I can leave it on the lowest setting and it can still get the bike high enough for me. If I want the back wheel off the ground (to say lube the chain), I position it more towards the rear, and let the front wheel rest on the ground. No need for me to get both wheels completely off the ground at the same time. That way it stays very stable. I also raised the platform until it just barely fit under my bike, and then it raises both tires a couple inches off the ground. It will sway a little like this if you push on the bike, but it still feels fine to me. If you have a full MX bike with more ground clearance and suspension travel, you will probably need to raise the platform a few inches.. I expect it might feel a little less stable. So I would set the platform only as high as you need it to be to get the job done. Also there is a locking nut on it, so I rotated that in place and then rotated the platform until it was snug. Works for me. I also like the hydraulic thing on it, to make it drop slowly rather than just plopping the bike straight to the ground when you release it... And I don't know if this is how they all ship, but mine had an extra corner pad (for the "feet") and an extra c clip for the pins. I really like the convenience of this stand! Hope this helps someone.

Guys. This stand is a life saver. Is functional. looks good, made well, locking mechanism works good. Very easy to use and you can use it with multiple bikes (versatile). Now the size is a bit smaller than what I thought but ones I started using it. It fits where others wouldn’t.

All joints are fairly loose. The handle is 1/8 crappy steel, so it's a little bendy. It lowers really fast. It's cheap and it lifts my crf250 rally ok. 365 lbs. It's wobbly but it works fine, and probably won't drop the bike.

Bought this for my son for his Surron Bike and it has worked great! He is constantly working on his bike taking it apart and this has worked out perfect for him while doing so. Good quality and durability.

Amazing! PERFECT for lifting my CRF250F by myself. No more struggling to wrestle it onto a stand and risking injury. Slides right under and lifts easy peasy. Where has this been all my life? Lol

Needs a release switch to lower. Not to easy to raise either with only a dirt bike.

What a great product! Honestly for the price, I was expecting maybe lots of assembly or something to be a pain. I had it together and adjusted for my motorcycle is 10 minutes..., and it definitely met my expectations. I would recommend for sure.

Perfect for my son who uses this to change things in his mini dirt bike. Easy to use, very durable, and seems to hold the weight of the bike no problem!

Buena calidad en todos sus materiales, excelente funcionalidad, lo recomiendo!

Works well on dr350 and lowers slowly

Super

Super Artikel TOP Motorradheber. Gute Verarbeitung, gute Funktion, sehr stabiler Motorradheber / Hebebühne. Wir verwenden diesen für eine Motocross und dazu ist der Heber sehr perfekt. Dank des Zylinders, lässt sich das Motorrad sehr einfach nach oben heben und beim herunterlassen, fährt das Motorrad wieder auch gedämpft nach unten. Absolut zu empfehlen.

Di facile utilizzo e molto valido.