80mm/3.14" Rubber Tires & Plastic Wheel Rims 2.2 Inch 12mm Hex Hub Compatible with 1/10 HPI WR8 Off-Road Rally 1/14 WLtoys 124019 144001 1/16 Redcat Volcano RC Buggy (Black)

Work absolutely great for the fts10 but you do have to sand/grind the inside lip of the wheel for suspension clearance in the front. Not a big deal took me about 10 minutes with my Dremel to do it. The rims are really thick nylon plastic so there is plenty left after clearancing. Slightly larger size but I didn't have to clearance the body to make them fit so they were good. Very very good traction the larger size also increases the gearing so you get a little bit more speed. They wear a little better than the stock ones but when you power slide on pavement they all wear pretty quickly. Overall the best and cheapest option to re-shoe your rally car. Update: upfitted to 4S power and they actually lived through one pack. Gotta pay to play and with these you pay less to play. Works for me. Update- these are your best option for the xts rally car. I've tried at least 4 different wheels/tires and these are by far the best. They held up to 65 mph 4s power through a couple packs. Yes you have to grind the lip a little but nothing else and I really mean NOTHING else is worth buying. Just get these. Glue them yourself and stop whining. No big deal. On my 4th set. Last 4 to 6 packs depending on 3s or 4s. Yes 4s is freaking awesome. Worth doing. I used an old bl 120 I had laying around. Just do it. Speed rules. So do powerslides at 40 mph

Prefect size! Installed on 1/10 trailer to pull around 1/10 crawler cleaned up the trailer look! And nice quality tires

Excellent wheels and tires for 1/10th scale rally car! I used them on my hpi Subaru and they are great. One thing to note is they are not pre glued so be prepared to do so!

Rubbers good. Medium-ish compound. Foams too hard for my liking. (i just removed the foams) Does not come glued. (must glue yourself) Seems to hold up well to 50mph on my 1/14 scale 3s truggy. Turned it into a street-racing beast. These tires soak up the pebbles and cracks instead of launching the car into the air or cartwheeling. compared to the stock tires that were rock hard hockey pucks.

Great fit for the rlaarlo xts-f10 the steering link barly touches the inside like a hair but the handling and performance i dont mind it and being a lil bigger raised it up so the body isnt digging into the ground anymore. Oh you may need to trim like 0.3mm off front fenders i did.Its firmer tire but still has great grip only ran 2 packs through them wide open literally the whole time. 5 stars they do need glued on and they come with foams

Didn't come pre glued but they are exactly as advertised except for the cheap burned rubber smell. Too cheap to waste my time returning.

These things were meant for the Rlaarlo XTS F10. They fit absolutely perfect and perform just like the stock ones with better control. They grip just enough and break loose when you want them too. As fast as I go through these things, 20 is a great price.

Looks great on a xts 10. Would give it a 5 star but it rubs on the inside of the wheel. Mine did come preglued and what a bad job they did. The wheel doesn't extend to the edge of the wheel. Makes them wobble. I'm super disappointed and wish they would send a good set. Pretty sure it's a return

Great tires done wear out fast