PLA Filament Information: Material: PLA (polylactic acid) Weight: 1.05KG Gross Spool / 0.92KG Net Weight (Minor deviation). Recommended nozzle temperature: 190 ° C - 220 ° C Diameter: 1.75 mm (roundness tolerance +/- 0.02 mm) Bed temperature: It can not be heated or available (35 - 60) ° C About PLA materials: 【It is suitable for all occasions】 Polylactic acid (PLA) can print large models without a hot bed and the corners are not easy to lift. It has low shrinkage and works well even when larger models are printed. It is suitable for all sizes of printed matter. 【Excellent 3D Printer Printing Materials】 Polylactic acid (PLA) has very good printing properties: there is no pungent smell when printing. The hardness and strength of the printed model are good. the shine is good. The stability in an environment below 50 degrees is 20 years. 3D Printer Filament Tips: - If the coil is damp, you can bake it in the oven at 50 degrees Celsius for about 50 minutes to restore dryness. - After opening the packaging it is forbidden to expose to fire or direct sunlight. Please store in a ventilated and dry place. - Because Pla + material consists of biodegradable springs. It's easy to get wet. We recommend to pack the threads after each print in a sealed plastic bag or box. Customer Service (12 Month Money Back Guarantee): - How to contact us: Log in to your account> Click on your account> Your orders> Find your order and click on CONTACT SELLER, then we'll get back to you as soon as possible.
O**T
this filament is great! It's a bit translucent
Once I found out to set the bed to 60 degrees, this filament is great! It's a bit translucent, but when printing thick walls you don't even notice. I'll definitely use it all up and buy more if needed. My temp calibration tower did not have any difference between 198 and 208 degrees so this prints nicely in a wide range of temps. I did a complicated print with a lot of supports and while the supports were not the easiest to get off, using a mini torch, the evidence of the supports is nicely removed.
M**1
Prints perfect, no snags in the roll
Prints perfect,no snags in the roll, overall VERY happy with this filament. I usually print strictly in ABS but decided to use PLA for a big project, and this is perfect. The blue has a very slight opaqueness to it, depending on wall thickness, but that works well for the project I'm using this for, almost looks like a metallic. The red parts for this print are also in Repko PLA (the silver is an aluminum composite filament) and print every bit as flawlessly. Definitely a great bang for the buck, and I will be ordering more, especially if more colors become available and the price stays where it is!
J**S
Not sure if he means lowest temp possible or lowest temp within filament recommended guidelines, I printed mine at 205
Pulled of my nicest print ever with this stuff. Not sure if its fully the filament to accredit or that my friend told me to print near the lowest temp that doesn't make your extruder jump. Not sure if he means lowest temp possible or lowest temp within filament recommended guidelines, I printed mine at 205, probably gonna lower it 2 degrees
A**Y
I do enjoy the color it is quite accurate to what the ...
Warning! I am an amature at 3D printing take everything i say lightly. Right now i can only give it 4 stars because i haven’t used this filament as much as i hoped. I do enjoy the color it is quite accurate to what the picture shows. I attempted to print a few things (failed due to user error. All me haha). However, the filament was no problem for me and printed well around 200-205. I was slightly burning it around 210-215. Repko actually emailed me before the package giving me a little bit of information and customer support lines which i thought was great for a company to do. Overall i would recommend and use again
E**N
Not solid blue, but translucent
Overall I'm really happy with this filament. The only thing keeping this from being a 5-star is that it's not really clear in the item details that this filament is not a solid blue but rather a more shimmery, translucent blue. Despite that, I've found some good uses for it. Check the picture for a better idea of what the color really looks like.
S**N
Outstanding!!!
This filament is absolutely gorgeous, prints flawlessly on my Flsun I3 at 210° with a bed temp of 60°, printing on "just keep printing" heated bed lining.
L**9
Prints Well Great Value
Great blue color and prints extremely well especially when you consider the cost. In fact I just ordered my second spool today having almost run out and several more projects I want to make in blue.
C**G
Five Stars
GORGEOUS COLOR. It's just a tiny bit translucent and a little iridescent.
Trustpilot
2 months ago
1 day ago
