VEVOR Motorcycle Lift, 1100 LBS Motorcycle Scissor Lift Jack with Wide Deck & Safety Pin, 3.7"-13.8" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring Motorcycles

Heavy duty raises fast with 7/8 socket and power driver. no assembly required. Extreme heavy gauge steel installed 200 pound rated each rotating locking HF castors. Onto trex decking to add more stability. Worked great to lower fuel tank. Very easy to remove two bolts so aI could drill holes on drill press. The final result exceeded my expectations. Great way to easily, for minimal cost provide a safe lift to any heavy object. This is rated at 1100 pounds. Purchased this to lower and replace 23 gallon to empty fuel tank on van. Should work well for transmission as well if one uses wheel cribs like I have here. The vevor works great with the added height achieved with wheel cribs on the vehicles tires. Wheel cribs are safer than Jack stands. And when a tire needs removal then 2 Jack stands should be used on that corner.

Perfect, cheap, no frills, works great. Will hold a street glide for the winter with no problem. Even bought on for my friend because it’s a good deal. I just put a socket on my impact driver to raise and lower it. Great for checking tire pressure, storing the bike with tires off the ground, doing general maintenance, etc. Stays steady, will lift and hold a 1000 bike with rider and stays in place.

Comes assembled and seems well made made. Works well and is simple to use. Handle is removable to reposition. Easily lifts Triumph Street Twin.

Just finished a job with this Jack on a 2002 Harley Davidson Electra Glide - needed it to lift and hold up rear of bike while sitting on a full size bike lift to change out the back tire. Used a ratchet and 22mm socket to adjust height instead of tool that came with the Jack because it just works better. No issues at all - will be using this Jack for a lot of different projects. Slid under the frame with no problem so it will work for my other bikes as well! Good jack for the money! I would recommend this Jack.

Very sturdy, good width. Lifted and held my Harley Heritage and sat very stable on the platform. Excellent price and really comes in handy, takes very little storage space. Highly recommended for working on Heavy Bikes.

Takes a bit to get used to but as long as you lower the bikes weight on the safety pin, it isn't as prone to moving while you work on it. I would say it seems to be the better frame jack for the price. Works well on my v star 250. Make sure to have a second pair of hands on the first lift as its a little flimsy while going up. I use a drill because the tool given is a bit silly for the bulk of the lifting. Better for minor adjustments.

The Vevor Motorcycle arrived on time and was well packaged. The lift arrived ready to use. Inspection and initial use revealed the lift to be well designed, well finished and well assembled. The threaded lifting rod turned smoothly and was properly greased. The thrust bearing at the head end of the rod was well toleranced and also worked smoothly. The safety lock (rod) was a key purchase consideration as it provides an added measure of security beyond the threads of the lifting rod mating with the threaded shaft under the lifting platform. I am looking forward to reliable service from this lift.

Great little Jack to use on my lift table. Very sturdy and durable. Works very well when a bikes on the lift, you can slide this under it while the front is secured and tied down. It is also very stable. Best part is it came a day early

Brilliant bit of kit. I bought it to get my Vw beetle engine in the car and I’ve just ordered caster wheels to make easier but it goes up and down perfectly and not a cheap bit of kit very solid and strong

Non pensavo fosse capace, eppure ha contemporaneamente alzato da terra ambedue le ruote della mia moto. Non pesa moltissimo, è davvero solido e ben fatto e non costa molto. La chiave che avvita la vite senza fine può essere fatta girare anche col piede, mentre si tiene la moto in verticale finché il cavalletto non tocca il telaio o la protezione del motore. Un vecchio tappetino auto di gomma messo al di sotto è ciò che basta per essere sicuri che non si muova. Molto soddisfatto!

ok

PARFAIT FONCTIONNE TRES BIEN

Ich muss sagen es ist ein tolles Hilfsmittel für meine Roller Reparaturen. Es ist Qualitativ hochwertig, einfach zu handhaben und der Roller oder das Motorrad hat bei der Montage einen stabilen Halt. Nichts wackelt oder kippelt was wohl auch der soliden Konstruktion geschuldet ist. Leider hatte ich das enorme Gewicht der Hebebühne bei der Abholung bei der Postfiliale unterschätzt. Zusammenfassend kann ich sagen für schnelle Reifenwechsel oder andere Kleinreparaturen wo das Motorrad oder Moped etwas angehoben werden muss ist es perfekt. Da damit schon Roller repariert, absolute Kaufempfehlung.