8pcs Joysticks Replacement for DualSense PS5 Controller, 3D Analog Sensor Wheel Thumb Sticks Joystick Rocker Module Replacement for Playstation 5 Controller

Works great! The box it came is a bit too small but the sticks works perfectly

Took an extra few days to arrive. But is what I asked for.

Some worked well and I had like 3 of them that already had some major stick drift. Even after useing a 3rd party software to re calibrate them. Glad I got 8 of them.

Just used 2. The replaced one had a drift, but it is advisable to replace both. Fits perfectly in the PS5 boards. The problem here is to take out the old ones. You need soldering experience.

I replaced these pots in 3 controllers. It fixes drift, but comes with it's own issues right from the manufacturer. Some work, some don't. For those of you having issues replacing, due yourself a favor, buy low melt solder, flux, and desolder wick. Makes easy work of this. Apply flux to pins, add low melt solder being mindful of not staying on one pin too long. Move low melt to all pins and keep moving in a circular motion keeping board hot. The pot will fall out. Clean with ipa, put down fresh flux, apply wick to board to clean holes followed up with another cleaning of ipa. Install new pots, flux pins, and resolder again not staying too long on the pins to prevent burning eyelet and ruining the board.

You don't have to solder. When you're looking at the component on the board, just pop the two green tabs off from the center, take tweezers and pull the white disk out and replace with the coils from the replacement. If you put it in correctly, the green tab should click back into place. Shouldn't have to force it much. If you are, it's not seated correctly. I've fixed three controllers this way. I've also noticed sometimes these replacements may not work. That's just an FYI if you're certain you did everything right but it's still drifting. Just try another one and it should work.

They work well.

I took the guts out of part of this and it fixed the stick drift in my PS5 controller. I later got drift on one of my XSX controllers as well and swapped out the guts with this and it fixed it just the same. Both Sony and Microsoft seem to be using the same internal parts. Completely worth it to fix both of my controllers and I still have several guts left to fix 6 or so more controllers if I need to.