H6L-G Ultra Compact Laser Sight for Pistol Handgun, Rechargeable Sub-Compact for Taurus G2C, G3C, 1913 Picatinny, Sig P320, Beretta 90two, S&W 99 and S&W TSW

Battery life not the best but it's a great little laser imo, fits well on a ruger security 9 compact

Mounted to picatinny rail on Sig Sauer SP2022 using the Sig 320 key supplied. There are keys for other common pistols included as well. Mounting is fairly straightforward with supplied hex wrenches. Mounting is solid with no perceptible wobble or torquing. The larger hex wrench is for mounting the laser. You must remove one side of the rail bracket on the laser to mount it. Smaller wrench is for calibration of the beam. Slight incremental turns of the beam adjustment screw move the beam significantly, so go easy. Simply select the distance you want to calibrate with a measuring tape (7 yards if you want a common default distance) use a table or bench rest to steady the pistol and adjust the calibration screw to line up red dot with your desired sight picture. If you can actually shoot in a low light range area, you can place the red dot on the bulls eye of a target, steady the pistol on a bench rest, and see where the bullet strikes in relation to the red dot. If you have a bore sighting device, you will overlap the two dots to sight in the pistol. Of course this assumes that your sights are accurately sighted in for the desired sight picture (with post and groove sights- generally the top of the front and rear sights are level and centered, with the target bulls eye resting directly on top of them.) The beam is nice and bright and features a strobe setting, although I can't imagine where you would use it. The charger features a magnetic connection for ease of use. The red dot activation switch is nice and sensitive and slightly indented to avoid unwanted activation while holstering or laying the pistol on its side. This laser is a great bargain for the price. Recommended.

Works with modifications. None of the rail plugs are an exact fit for a Keltec P17. The p320 is close but hits the trigger guard enough to throw off the fit fractionally, usable but I didn't like the fit. The 90two clears the trigger guard but the post is too high. None of the other 3 will work. I decided to sand down the 90two. Had to remove the writing and about a 16th inch of plastic via some hard determined sanding but now it fits pretty well. Holds where you adjust it. Impossible to see in the grass or other backgrounds in sunlight. Probably the only real utility a laser sight has is to let you aim in near and total darkness when you can't see your iron sights. It is nice and compact, bright enough at dusk, dawn and midnight, but no other advantage over an iron sight in my opinion. Battery life seems acceptable, and being able to charge it without changing batteries is a plus.

Fits my Taurus G2C well out of the box. I modified an adapter to bring it closer to the trigger guard (personal taste) You WILL need a soft holster with this and a G2C, as NO ONE builds a holster for any G2C with a laser UNLESS it's the Viridian made specifically for the G2C. The Federal Holsterworks Hip Holster sold here on Amazon works well (I own and use it with this sight and gun) Pros: Good value for the price. Sturdy. Well built. Ambidextrous controls. Holds very securely to pistol. Various adapters. Cons: Main complaint by most is the light switch activation pressure. ( I share a very easy, cheap and effective remedy below). Green dot could be bigger. Proprietary charging connector. ( In fairness to the company, this is done to make the unit smaller and therefor a better fit for compacts and sub compacts) That's it! To fix switch issue. Get a piece of 2mm heat shrink. Cut it to approximately 1cm. Now, take and place it between paddle lever and laser body (See pictures. I used a red piece in one for visual clarity). That's it. Definitely firms up the press and if you want it even firmer, just add a second piece!

Wow 9 hand guns all with blue light laser. Easy to install easy to use and chargeable. Glocks, sig my shotgun had a slide. Very happy. Two screws loose and pops into place. Install in under 5 min. I am disabled at 63 slight eye and I did it.

This is a very bad product, it arrived used! DO NOT BUY!!! Mine arrived in an open box and it was missing the custom USB charging cord. Luckily the laser arrived charged for immediate use, but cannot be re-charged. I simply need the USB charge cord. I contacted Amazon Alexa support and was told to contact customer service, explain the issue, and they would send a replacement and I could keep the bad one. Well, there is no explainng anything to Amazon's closed loop menu driven Customer Service. VERY FRUSTRATING. AVOID BUYING FROM AMAZON, and AVOID BUYING THIS PRODUCT. I cannot believe the manufacturer would resell a used product missing a key component like USB charging card. Further I can't believe Amazon Customer Service is so closed loop that you cannot break through to explain the issue to a person, or at least a robot that listens!!! I should have saved myslf all this agony by buying the laser at Academy.com Save yourself the trouble and move on DO NOT BUY THIS PRODUCT!!! The yellow markup shows where the USB cord should have been. :(

Why did you pick this product vs others?: Compact size and compact price. Fine quality at any price point (good as any others I have costing many times more). Fits very nicely onto pistol with only about 1&3/8" of rail. Precisely made. Fine attention to details. Metal inserts molded into threaded holes. Has steady and pulsing modes. Adjusting screws have positive click stops. Charging port attaches with magnet. Green laser is amazingly bright.

Good Product ---- bright green laser; easy to install. Works well for a while - - - but having trouble keeping it sighted in and on target. It tends to lose zero after a couple of hundred rounds at the range. I have it mounted on a Taurus TX22. It is what it is - - - - you can't beat the price.