Specification 1.Size: 55mm×45mm×198mm 2.Weight: 453g 3.Battery capacity: 500mAh×4 4.Voltage: 15V 5.Current: 5A 6.Charging mode: USB 7.Charging time: 2 hours 8.Inflate efficiency: Inflate a 26-1.95 mountain bicycle tire from 0 PSI to 60 PSI in 2 minutes 9.Max inflating pressure: 150PSI 10.3BAR 990KPA 10.5kgf/cm2 10.Operation temperature: -20℃~+60℃ About Inflation: 1.Connect one end of the air tube to the inflator, connect the other end to the tire valve. (For the french valve, please install the valve converter at first.） 2.Press the unit button to activate the inflator. The LCD will display the current pressure. 3.Press the unit button can switch the units between PSI\BAR\KPA\kgf/cm2 after the inflator is activated. (The recommended range of pressure can be found on the tire in general.) 4.The + button and the - button are preset buttons for adjusting the target pressure. Press them can adjust the target pressure slowly. Long-press them can adjust the target pressure quickly. The target pressure will be locked after the LCD flickers for 4 seconds. Besides, the target pressure can be locked immediately by pressing the unit button. 5.After preseting the target pressure, pressing the power button can start the inflation. Pressing it again can pause or continue the inflation. The inflation will stop automatically when the target pressure is reached. (If skip Step-3 and Step-4, the target pressure is the value you preseted last time.) 6.When the air cube is separated from the tire valve, please complete this process quickly to reduce the leakage of the air. 7.The inflator will not work when the target pressure is lower than the current pressure. Note: Before using, please read the attention on the box carefully.
Trustpilot
4 days ago
3 weeks ago
