KPON Invisible Wireless Charger,30mm Under Desk Charger Mat, Furniture Table Nightstand Desktop Charging Station for iPhone17/16/15/14/13/12/Samsung/LG/Google Pixel Desk Essentials(with QC Adapter)

Love how simple this was to install! Works well on iPhone, Moto Razr and earbuds. Biggest challenge was figuring out where to mount the part under the table top. I have it on my bedside table and it is perfect.

It worked very well through1 1/2” quartz countertop. It keeps the countertop uncluttered from wires. It is easy to install as long as you have power supply under the counter.

I love that this device can charge wirelessly while being relatively unobtrusive. It comes with a metal sticker that sticks to the top of the desk or surface, while the electronics of the unit are mounted underneath. The instructions explain that depending on the thickness of the surface the sticker may or may not be required. In my experience, I would not anticipate being able to use it without the sticker in any circumstances. It seems like the sticker focuses the energy somehow. Without it, the charger is slow, may cause excessive heating, and may throw and error and refuse to charge at all. Nonetheless, with the sticker in place it seems to work reasonably well and still looks very nice. I would have preferred the charger to be completely invisible from above, and the sticker interrupts the surface of the table I mounted it on, but having the sticker means you can see where to put your phone and it charges more consistently.

This is the most complete charger I have seen. Once installed, all you see if a sticker on the desktop, No cords or charging disk. Nothing to knock off the desk or break. This charger charges my phone with no visible charging unit or cords. When opening the box I was surprised at all the parts. First was a Company card with links to the company and installation video. Next was the manual, the bracket, the stickers and the charging disk. Below all that was the cable and USB Adapter. The USB Adapter is a 18W USB Charger/Adapter. The stickers, one with electronics in it and the other to put on top to indicate where the phone goes to charge. There is also this cool "Alignment Assistant", a Wireless Locator that tells you where on top of the desk is exactly where the charge is located. This Locator has 6 LEDs and they light up based on where it is located, if all are lit then you are dead center over the charger, pretty cool. One thing I did not expect was that you cannot just place the phone directly on the charger, it needs to be below the desktop. PS: they tell you thin in the instructions. To start I cleared off an area where I normally place my phone. I then removed the backing from the mounting tape of the bracket and placed it under the desk at that location. Next plug the USB Adapter into the wall and attach the provided cable from the USB Adapter to the charging pad. What I did next was place the Power Sticker on the desk with the "Alignment Indicator" on top of it, centered. I slowly moved it around until all 6 LEDs lit up. I put a few pencil marks on the desk to indicate where to put the Power Disk. Then removed the backing from the Disk and placed it between the pencil marks. I put my phone over the Power Disk and my phone started charging. It was fairly simple to install and align the Power Sticker, with the aid of the Alignment Sticker. This cost the same or a little less than other Desktop Wireless Chargers that I have tried. They were always getting knocked off the desk, has a pesky cable and were just inconvenient to use. By far this is the best value and a lot easier to use. I just move whatever over and place the phone on the Power Sticker. I currently use this on my desk and we are thinking about getting more, one for the nightstand and another for the table at the end of the couch where we watch TV. Overall this is a great charger and reasonably prices, simple to install and use. There is nothing in the way and it keeps my phone charged.

if its in a case. I've 3 cases that allow Qi charging and for all 3 cases (fitting my Galaxy s22 ultra) i lose power. Does Not Always charge my phone even without a case. I used the Amazon Contact Mfgr with questinos, and heard no response. I spoke with an Amazon rep about the problem and wished to ask Kpon about how to fix this problem, and I was referred to the "contact mfgr" link, again sent a message to Kpon, no response. I tire of each night taking the phone from it's cover. Purchased charger 3 months ago, no response from Kpon,. I've removed it from my desk, tried different thicknesses of wood, marble, and though I can get their light bar / positioning installer to light up, it Will Not charge through my 10 dollar basic / typical plastic cell ph case. really a wasted 35 dollars. sigh

Nice product, relatively easy to set up. Was able to find the sweet spot per instructions. Nice design, but my phone heats up while charging. Don’t know if its the phone case or what. I’ve tried re-positioning the phone on the pad…I really would like it to work, but will probably go back to using my previous cradle charger if I can’t solve this problem.

I didn’t love this. Nice in theory but it was very finicky and I could barely get it to work. The idea is to have invisible charging on your counter. My counter is barely an inch thick and it didn’t work through that even though it says it will. I would have had to use the super charger sticker thing that sticks on top of the counter to make it work. What’s the point in that. I don’t want a sticker on my counter.

It's really convenient. No extra charging cable to use. I was wondering why the assistant wasn't lighting up but turns out I had the charger put in upside down. Make sure to have it facing instructions side up towards your desk. Installation was easy. It can charge without needing a sticker but I opted to use the transparent sticker over the coil sticker which I had to throw out cuz a bunch of residue from the paper adhesive stuck onto the paper and I didn't want some sort of risk with it. The transparent sticker is inconspicuous enough but still lets me see where to put my phone down to charge. Was hard to find a good place to put install the charger under my desk. I pulled the tray out repeatedly trying to find a good spot for it without anything getting in the way of the charger if I wanted to take it out again. Hope the adhesive keeps sticking after I did that lol For people concerned about their phones heating up, both your phone and this charger have protective measures against that. The phone will stop charging if it gets too hot and so will the charger. Even regular charging cables will heat up your phone if you leave it charging for too long. It's not like the entire desk is gonna catch on fire the way some of these reviews are making it seem. Overall aside from the defective power sticker I had to toss out. I'm very happy with this product and may buy the upgraded version of it once I see how this one fairs for a few months