– Heat Gun - 2000W 350℃ & 600℃ Paint Stripper, Hot Air Gun w/ 2 Temperature Settings, Overload Protection, 1.5s Fast Heating, 5 Nozzles - Heat Stripper for Paint Stripping, Shrinking PVC, Crafts

Never having used a heat gun before I was not sure how complicated it might be, but armed with a You Tube video and this gun I found it was pretty straightforward. Just two settings, easy to hold and not to heavy, the only danger was setting fire to the door I was stripping paint off. Just go slowly and use your common sense. These things are hot! I did burn myself a couple of times, but thankfully nothing of any consequence, and each time it was a result of being careless. Good product, reasonable price, does what it says.

Really easy to use. The additional attachments are great

Good quality gun, last on lasted over 5 years

After spending some considerable time researching electric heat guns I finally opted for this one. There are some cheaper ones around and many that cost more, some quite a bit more. On initial inspection the overall build and finish appears to be pretty good- no rough edges or mis-alignment and the gun is very light in weight and about the size of a hair-dryer. The mains cable appears robust and thick enough to contain wiring of a suitable rating to handle whatever current is drawn ( a 2000 watt gun will draw about 8 amps in theory on the high setting). It runs quieter than you might expect and has 2 heat settings: #1 is about the same as an average hair dryer while #2 is for more serious uses. another review states that the 2 levels only alter the blower speed and not the heater element - this is not the case. On #2 the element glows much brighter than #1 as you would expect. Another reviewer claims that the hot setting is too hot. Really? If the heat produced is too much for the particular job in hand then just increase the distance between the nozzle and the 'target', it's not rocket science. Talking of nozzles the included set seems OK, maybe a little flimsy but I actually have not used them as yet and will probably not need any of them but at least they are included unlike certain other models. Another review's criticism was regarding the instruction being minimal. Yes they could be described as such but it's common sense: it's a heat gun so will get hot: wear gloves, check output level, turn on and point where it needs to be pointed and nowhere else. An inch thick manual is not needed. Negatives: a longer cable would have been nice as would a carry case however this unit is competitively priced and, in my opinion, very good value. I make no comment about its longevity - I suspect this is subject to how often it will be used and for duration of use and there is a 12 month warranty anyway. At the time of my purchase this make and model can be found a little cheaper on a well-known auction site but I prefer to deal via Amazon for electrical goods.

Great price, works well. Sturdy build quality. Used for about 10 minutes straight and no shut down.

Well made, easy to use.

Great value and feels expensive functions super 👌

Tried everything to remove two layers of paint off my door and then i bought this . It works so well. Forget sanding this just makes the paint come off in seconds .