VIVO Height Adjustable 17 to 32 inch Single Monitor Articulating Wall Mount for Standing Workstations, Fits 1 Screen with Max VESA 100x100mm, Black, MOUNT-VW01A

Brilliant wall bracket—really sturdy and does the job well. With smaller screens, the bracket is a bit visible, but that doesn’t bother us. One thing to note: if you want to lower the screen, you’ll need to lift it all the way up first before it slides back down 👍🏻

I always read the low-star reviews first before buying a product, and to address some of the criticisms: There is one review showing the front plate being askew and not parallel to the rear plate. There is a hex-head screw to the rear of the "ball" which can be loosened and this is adjustment, so that is not a real complaint. There are reviews complaining about heavy monitors sagging. Again, this head hex screw is the critical adjustment - tighten up that screw and it will not sag. There are reviews talking about the "strange wallplugs". These are pretty standard, if cheap plastic, dry-wall fixings, not wall plugs for fitting on a brick/block wall, so yes supply your own fixings, not a big deal. Once these aspects are understood, the bracket is reasonable for its purpose. With 4 fixings to the wall the back plate is sturdy, as is the fitment to the monitor itself (2 sets of bolts and a set of washers are supplied for this, the bolts I think are M4 and M5 maybe, depending if you are using the 75 or 100mm VESA pattern). The potential weak point is the interface between these two components. Due to forementioned ball joint with hex head screw, the adjustability aspect is very much dictated by how tight this screw is, and you can only access it with the monitor off the bracket. If you tighten this up to the max, you will not be able to swivel/tilt the monitor around as there will be no give. Depending how heavy your monitor is, you can get away with slacking this off a tiny bit so there is still a lot of friction, but the weight of the monitor will not pull it down - that's something you need to figure out, but I don't think it's too hard to get a feel for. The up/down is on a ratcheting system that means you can only go one way until you get to the far extreme, and then the ratchet resets and will move freely to the other extreme, and starts ratcheting again, so absolutely mount with sufficient space to be able to move the monitor to each extreme. Adjustment is minimal so don't expect the range of a fully articulate arm or anything, this is more about getting close to the wall with a little bit of wiggle room to tweak the right position. Once mounted things are relatively solid, for my monitor at least (about 3.5kg), but if you touch the monitor it does have some slack where it will move around a touch before it starts putting pressure on the ball/friction mount and actual adjustment starts happening, it's not locked solid in position so I wouldn't try and use it on a moving vehicle - but for a home wall, this is acceptable.

Wow this is a great mount, only reason I would give 4 stars is that it has the strangest wall plugs I've ever seen but everything you need for it is include (besides the impact driver/drill ofcourse).

I bought this for a weird set up, 32" curved with a movable 20" monitor on this mount. Its a bit fiddly for what I want but it does the trick perfectly, I have it set up vertically day to day but when the other half works from home and has the laptop we can take the monitor higher and horizontal so the laptop sits nicely underneath it and it is still the same height as the monitor next to it. For this the mechanism is a bit clunky but if used in a normal way its very clever. I would recommend this if you have an odd set up like ours does the job!

Nice well made. Gives me great monitor height, rotation and angle adjustment. Added bonus that no more stand on the desk making things much tidier. I pushed my lock with my 34" ultra wide screen monitor but it copes well. Easy to fit and a good price

Installed with a 27" monitor, no issues, fit for purpose

I wanted a low profile mount for my gaming monitor and had limited desk space as it is. This mount kept the monitor as far from my sitting position as possible and did exactly what I wanted it to do. The elements of the mount are very sturdy and fitting the monitor to the mount was very simple. As you would expect with it being close to the wall, there isnt much tilt/swivel to the mount but there is enough to help you get the perfect angle.

I am really impressed with the quality of of this wall mount. It is solid thick metal with some plastic parts. Seems like it will have no problem holding up to 32" monitor (mine is 24). Easy to install - the VESA mount connects to your monitor with 4 screws and then slides into the wall mount once you connect it to the wall and is then secured with one screw on the side. Because you can rotate the monitor on the mount, it is not critical to do a perfect vertical drilling job. The height adjustment mechanism and tilt is not the easiest to use - I would go for a more versatile arm if I wanted to move the monitor up and down several times a day. However, for the occasional height adjustment it will do just fine.

Heel handige monitor-muur-mount-plate (!) In hoogte verstelbaar (+ kantelen , tilten , draaien) & geeft (zoals in mijn geval) meer stevigheid (door groter verbindingsoppervlakte) aan de Gyproc-plaat , waar de monitor op bevestigd moest worden.

As per instructions, for height adjustment, the monitor must be lifted to the top position in order to slide down to the lowest peg. Doing so allows the ratchet mechanism to engage so that the bracket height can be adjusted upwards in increments. This also means you must ensure that the monitor has sufficient clearance to be lowered to the bottom position of the mount. Material is sturdy and various screws were provided for VESA/wall mount as well as drywall plugs.

Ajustes muitos precisos. Tamanho ideal.

افضل شركه ستاندات و تقدر تعتمد عليها ولا تخاف على شاشاتك

I was looking for a slim monitor mount that would hold the monitor as close to the wall as possible since I have a small space. This one puts the screen about 3 inches from the wall (of course this will vary a bit depending on your monitor). The tilt, angle, and rotation adjustments are very easy once the monitor is installed. The up/down adjustment is easy enough but, due to the design of the locking mechanism, it can only move upwards, that is until you reach the very top, then the locking mechanism disengages, allowing you to move it downward again. Starting to move upward re-engages the locking mechanism. So it's a little bit annoying and tricky if you wish to move the monitor down by only a single notch or two. But you should only need to do it once and then you're set. Note also that this mount has no side-to-side adjustment at all, so you need to be very careful to drill your holes in just the right spot if you are particular about where you'll want your monitor to be horizontally. But other than that, installation is very easy, the instructions are good and clear. Other reviews have mentioned that the provided wall anchors are cheap and breakable, but mine came with very large white plastic "screw in" style of anchors, very sturdy. Highly recommend!