Syntech Protective Case Compatible with Steam Deck Accessories Console OLED/LCD, All-Round Protection with Non-Slip Thumb Grips, Silicone Cover for Enhanced Fit and Alignment-Gray

I picked up the Syntech Protective Case for my Steam Deck and it’s been a great addition. The fit is snug and feels like it was designed specifically for the device. It adds a noticeable layer of protection without feeling bulky or heavy. The texture gives just the right amount of grip, so the Deck feels more secure in my hands during longer sessions. All the cutouts line up perfectly, and I haven’t had any trouble with buttons, ports, or airflow. Overall, it does exactly what I wanted: protects the Steam Deck and keeps it comfortable to hold without adding extra bulk. Solid, reliable case that I’d recommend if you want protection without overdoing it.

Fits my steam deck oled very well. Some people complained about the flimsiness of the case but after a few hours it conformed to the deck. When installing it, you have to stretch the rubber a bit to install but as I said it conforms after a bit. The analog stick covers are comfy, look good, and they don’t do the thing where they drag on the plastic when you move them as much at all. Not enough to bother me at least. Comfy, great grip, and stylish! Would recommend.

I'm pretty pleased overall. It's a little bit difficult to get the cover on - due to its one-piece design, you will have to fold and stretch it a bit to get the Steam Deck inside. But once it's situated, everything's snug without being excessively tight and every port and opening lines up perfectly. The white color I got is nice and bright and doesn't so far seem to pick up much discoloration. It's a fairly thin cover, which has pros and cons. It's definitely not going to save your device from a good hard fling or a long fall, but it's plenty for absorbing accidentally being swung into a table edge or dropped to the floor. A screen protector (which this fits with perfectly) is recommended. An advantage to this is that you can still use it in a dock or its carrying case without issue, as it adds very little thickness. The thumbstick covers are a nice little bonus that helps save wear on the actual thumbsticks in addition to helping give the whole thing a more cohesive look. I'm sure there are more solid cases that would offer more robust protection, but I think if you just want a little bit of basic whoops-dropped-it-on-the-floor type protection for around the house that won't require you to constantly take it out of the cover and put it back in, this is a fine candidate.

This is a great case for the deck. It is definitely an off-white/pale grey as described. It is NOT pure white, so if you missed that in the title or caption, now you know!! It has wayyyy better grip/texture than my silicone case from IINE! It’s a lot nicer to hold. It DOES fit the OLED. It just covers the black parts on the side of the screen, but nothing is literally ever there anyway. It won’t impede on your screen at all. See my video for reference. I do think the price is a little high for just a silicone case, but there aren’t many available for deck that won’t take weeks to come from overseas so it’s worth it to bite the bullet sometimes. Overall I’m happy with the product. Would recommend!

Fits excellently to my OLED Deck. Cutouts are all in the right locations to enable access to all the hardware features. This has been in daily use for almost 3 months and is still looking very good. The joystick covers are an awesome addition and add a much needed splash of color. This skin/sleeve fits inside of the carrying case that came with the Deck and adds only a slight amount of thickness - the zipper seems to close just fine despite the marginally thicker closure. The sleeve fits perfectly over the JSAUX screen protector I installed.

I bought this to replace the K!llswitch case from Dbrand, While I loved the case it had one fatal flaw, for a texture based person the grip on it was absolutely horrendous not quite nails on a chalkboard bad but up there, after a while it would cause my palms to ache, I stuck it out for a while because it was expensive and I loved everything else about it, but in the end it was causing me to not use my SteamDeck. This was the second best option and i wish I had gone with it from the beginning. While it may not be a hard shell or nearly as sturdy (Dropping the SteamDeck in either would be "GAME OVER") It is extremely well made and provides enough cushion that minor scraps, bumps and bangs should be no problem the real reason you would want something like this. The grip is not as grippy and it's grooves are bit too deep for my liking but it feels pretty good, gives it a pretty cool look and most of all protects it There's some pro's and cons to it though. Pros: 1) It fits really well, everything is perfectly accessible there's no blocked vents, covered buttons or any sag really (in some spots it's a tiny bit loose) but overall you could play your SteamDeck in any position and not have to worry about it obstructing the buttons or anything. 2) The silicon feels great very velvety not like a glove but more like a silicon mold 3) the off-white version i got really look good on it 4) if you need to modify it to your taste it's really simple just to cut it with a razor to fix any defects it might have such as being too close to a button or in my case a little too close to the triggers 5) It actually kind of helps the B button without a sleeve the B button is kind of rounded off on the side of the SteamDeck leading to some wierd clicks on it (pressing a little to the side causes it to hit the chassis a bit) the sleeve helps center the button more so it's more of a straight up and down click. 6) It's only $20 as of writing this, and while it's not cheap it's definitely worth it. Cons: 1) Mostly just the grip grooves, they're not that bad but after a while it kind of leaves a pressure mark on your hands nothing too major 2) getting it onto the SteamDeck is a bit rough you have to stretch it a little and jig it into the sleeve being careful not to get the buttons or sticks but it wasn't too bad and it snapped right back to shape. 3) It may require a little bit of modifying since it's obviously molded and not perfectly cut, also the buttons are a little bit recessed since they don't stick up very high to begin with but in all actuality it doesn't really feel that different, just takes a little getting used to. So overall I give this a 4.7 out of 5 stars. It has some drawbacks but nothing that would even warrant docking a star, especially when considering the price vs the K!llswitch It would've been nice to have a slot for MicroSD cards and maybe a different approach to the grip but I really like it.

Have this case on two different decks. I also have 2 other buddies that each have this case on theirs and they love it. They fit super nice and the feel is excellent

Love the grip love the simplicity. Putting it on is a bit difficult but don’t be afraid to stretch it. (Better to stretch the case than to damage you deck) only downside is the A button catches on the cover and it pushes A when you don’t want it to. Also the thumb stick covers also rub against the case when fully tilting the sticks. Kinda upset but other than that gr8 case.

It fits really well, the top part is looser where it is thinner but holds its shape well and much better than I thought it would be. Would recommend for anyone looking for a full silicone skin. Added thumb stick protectors are nice

وصلني مثل ماتوقعت جودة ممتازة ولون جميل وجاي ضبط على الجهاز steam deck oled

Fit on all steam deck models plus the grip is so satisfying and good for long periods of time. but the con about it the price little bit high

This is quite strong, chunky silicone, not as flimsy as I was expecting and it does offer some pretty good protection. Being quite chunky you do notice the difference in your hands in terms of size and weight, but you get used to it in a few minutes. The thumb grips are also quite nice with a textured top section and the silicone is a little tougher than silicone thumb grips I use on my switch. I personally like the original thumb sticks enough and so I didn't put these on, but they're good and I think a lot of people will like them a lot compared to the original and definitely compared to cheap little plain silicone sets you can buy. Putting the case on you do have to be a bit rough, but the case can take it and once you slip it more or less into place, it's nice and easy to jostle round until it sits on all the cutouts perfectly. I like the dark grey colour and having a small dog and cat around that like to knock all my things off the coffee table or sofa, I appreciate the protection it offers as I always have thought the Steam Deck does feel a little bit fragile. The silicone has a matt effect and it isn't super sticky or grippy, but it does offer you a better grip than without it. Overall I like this, it offers good peace of mind without adding anything negative really. it still fits nicely in the case and fits all the cutouts perfectly. If you did just want it for travelling or taking out and about it is also pretty quick and easy to take on and off, though to be honest, I got used to having it on so quickly that I'd probably just leave it on for good now.

This protector is a lot better than I first thought after getting it out the box. It's very fiddly to put on and I was worried about the tension as you're pulling it over, but once it's on it fits quite well. Perhaps ever so slightly loose on the top bar but to be honest, you'd probably want this as I can see bits of dust getting caught under it so being able to move it easily helps to clean it. You're going to want to have a screen protector on first if you decide to get one. It doesn't come with one, and I originally bought one but were useless (nothing to do with this product though) so now I'm questioning how I'm going to get it off easily when I do get a screen protector coming. It should add minor protection from drops, but not a great deal. It will protect against scratches (except for the screen and exposed parts of course) and should help keep your deck in decent condition. Overall I'm happy with it. It's a small price to pay to keep an expensive device safer. At £17.99 it's reasonable.