Fotodiox Lens Mount Adapter, Nikon, Nikkor Lens to Fujifilm X-Pro1 Mirrorless Camera

The Fotodiox Nikon to Fuji lens adapter allows Nikon lenses with aperture rings, to fit to Fuji's X system cameras (there is a different adapter or Nikon 'G' lenses). The reason I went for the more basic adapter is because I have plenty of older lenses and my newer Nikon lenses tend to be zooms, which are much bigger and heavier, so not really ideal for mounting on an X-E1.The basic idea is that by adding the adapter, you increase the flange distance between the camera and the lens and add system adapter to the camera (in this case the Nikon F mount). The system is really basic and works well. Everything works manually and you have to set the camera to work without lenses, as there are not contact points between the camera and adapter. Aperture is handled through lens and you have to manual focus (which isn't to hard, even at low apertures, with the X-E1 zoom and focus peaking ability).The build of the adapter is very good, it took me a few minutes to work out how to remove the lens (there is a round button, which I tried to push and pull (in fact you need to slide back to open the lens lock). I would suggest, that Fotodiox create a small video showing how unmount lens process and put it on their site.I have a small problem with importing the product Fotodiox were very good and refunded the extra money I had to pay very promptly after I raised the issue with them.All in all I am very pleased with the adapter.

Works well with all Nikon lenses tried so far. A little bit of play between it and camera body but does seem to be a problem. Great to be able to use my 8mm again.

Bought this adapter to use my Nikon 50 1.4d & 1.2ais lenses on my XE1.The adapter is well made and solid, it mounts quite tightly to my Nikon lenses but is an easier fit to the camera; it has no slop or play when is use. It is discrete and when mounted with a lens it looks good and does not look out of place.When using my Nikon 50 1.2ais the camera feels unbalanced and not pleasant to use because there is a lot of glass and metal in the 1.2ais and the adapter moves the lens further away from the camera, the 50 1.4d is lighter and easier to handle on the camera - although, still slightly unbalanced. Both lenses have aperture rings, smooth focus rings and work fine on the XE1; if you intend to use Nikon G type lenses with this adapter they will not work properly because you lose aperture control.The adapter looses a star for a couple of small machining marks and the lever to remove your lens is quite stiff and is not smooth.Overall, the adapter is good value for money and generally well made.

I needed to use my Nikon lenses on my new Fujifilm X mount camera and in particular, my fast Nikon 50mm f/1.4 FX lens. This has worked out extremely well.The adapter connects firmly to my lens with little or no play, although I can remove the lens from it without trouble by sliding the lens mount lock BACKWARDS. The adapter then connects to the camera exactly as you would expect.I have been using this arrangement for several months without any issues. The lens operates in manual mode, but this has worked out very well on my Fujifilm X-T1 body. I have effectively got a Nikon quality 75mm lens. The image quality is excellent and I have been able to take clean sharp images with reasonable bokeh without feeling that this is a compromise. Even wide open at f/1.4 the lens/adapter arrangements gives solid results. The 50mm Nikon is a small lens so the balance is very acceptable, however, if you are planning to use any big lenses, you may find it more awkward to handle.The 56mm Fujifilm lens that I was previously planning to get has slipped way down my priority list as the only advantage it would convey is autofocus and perhaps improved balance. If you are not planning to shoot some kind of action or reportage photography, autofocus is no more than a nice-to-have. Great for your snaps, but for most other types of photography, manual focus is best.Definitely recommended.

Great quality, very solid and appears to be all metal construction. Smoothly attaches and detaches from my Fuji X-E2. Does a brilliant job of resurrecting my old Nikon fit full frame (i.e film) lenses. Very happy with the results.

Excellent adaptor, which I use for cheap Nikon prime portrait lenses from the 80s and 90s, which are great value and superb glass. You need to have aperture rings on the lens and then this works very well on my XT-20. Its a great fit and a third of the price of others. Buy this and get yourself some great old nikon lenses for under £100.

Secure on camera and on lens, no issues with this products, does what you would expect.

Works perfectly, very highly recommended.I use this with a Nikkor F/1.2 50mm and my Fuji X-T1 for great results.

Répond parfaitement à ce à quoi il est destiné. Tout contrôle est mécanique bien entendu, mais c'est vraiment de bonne fabrication. J'ai testé avec un Nikon afd 50 1.8 sur un fujifilm xserie , ça marche sans broncher. Le résultat par contre laisse à désirer. Fotodiox n'est évidemment en rien responsable du résultat des images. Si vous faites des commandes professionnelles, je conseille de passer directement sur le 56 1.2 que j'ai pu aussi tester et comparé (le Xf 50 f2 pour les budgets serrés arrive bientôt), si c'est pour de l'amateur, foncez !

It's a simple thing, not too much to say.It fits the lens and camera well with nearly no play and I can't tell that it leaks any light.I thought it seemed bulky, but it has to hold the Nikon lens out at a very specific distance so it can pretend it's feeding light into an even bulkier DSLR.

El material se siente sólido y de calidad aceptable, es completamente metálico, queda muy bien ajustado a la cámara y al lente. Yo por lo menos no identifico reducción en la calidad de imágen. Es buena compra si quieres usar lentes análogos de Nikon o de la serie D que tienen anillo de apertura en la lente.

Conforme a lo que esperaba

Simple to use and delivers great results using my Nikon lenses on my Fuji XT-10. Thanks to this adapter, I can use my macro lens to take great shots.It is easy to attach lenses to and from the mount adapter and it is easy to attach to the camera body. Depending on your camera, you may be able to do adjust some settings (as was the case with mine).The only caveat is with newer lenses made to be used with an AF motor. On these lenses, there is little or no friction when you move the focus ring. It can be difficult to be precise. But, this has nothing to do with this product.