IEMAI PETG CF 1KG, Black PETG 3D Printer Filament Filled with 20% Carbon Fibre, Heat-Resistant High Strength Rigidity, Dimensional Accuracy +/- 0.02mm

Ottima resa estetica e stampabilità, considerando che si tratta comunque di PETG.

Ive re printed so many things in this filament, Love the matt finish and strength.Im on my 4th roll in 6 weeks lol!I did however have some heat creep issues with a standard hot end and have since upgraded to a spider 2.0 and not had an issue since.my thoroughly tested settings for this and perfect prints everytime is237'c Hot end80'c bed45mm print speed.5 nozzle.3 layerand 3D Lac bed adhesionget the Z settings and bed super level this filament will not fail to print perfectly everytime.like to be a tad closer than normal PETG in my experience.But I will add I have a Tent and controlled environment in which I print

Refers to PETG + Carbon Fibre... all just about perfect. Not a hint of stringing or blobbing and, like normal PETG, it sticks really well to the bed (PEI in this case). I printed a calibration right angle, with 10mmx10mm 'towers' every 20mm, along the X and Y axes. Strangely, every cube measured around 10.19 x 10.21mm wide. I put that down to my liking for using four wall lines. So, I zero'ed my calipers on the X thickness of the corner block and measured the distance over the first 1&2, 1&3, 1&4, etc, up to 1&9. A graph of expected over actual dimension, showed a slope of 0.999947, which equates to the centre of each block being where it should be +/-0.5 microns. Wow!The finish is very good, has that typical carbon fibre reinforced filament look without the delamination which is so easy to get with Nylon based CF filament. It adheres as well as any PETG, ie sticks really well. A little elephant footing, like most PETG. After many trial pieces of many materials, this is the one I need for my project.Settings :Extruder 240 degCBed 85 degCRetraction 3 mmSpeed 60 mm/secLine walls 4Infill 30" hex triangularLayer thick. 0.16mm dynamic

Works as described and feels like good quality. Very happy with the purchase.Prints well and supports came of SO CLEANLY!!!!

Disappointed with this as its claims are a bit misleading. I’ve been printing production parts with Carbon PETG for 7 years now and recently after having supply problems from the likes of formfutura and primaselect i thought I would give this a try as it advertises itself as 20% CF like the big brands do. Unfortunately it’s not 20% long fibres instead it’s powder. The finish is not anywhere near as good as the mentioned brands even Ziro’s CF PLA is better. It just gives a very black Matt finish but prone to warping easily and just as heavy as normal PETG. It just goes to show why the genuine filament is 4x the price