EPAuto 3/4 Inch Drive by 40" Length Breaker Bar, CR-V Steel

I bought this breaker bar specifically for removing the Honda crankshaft bolts. I did a timing belt change on a 2015 Acura today and even with the "heavy" socket and crankshaft balancer holding tool, my Ingersol Rand air impact wouldn't remove the bolt. I attached the socket (with a 1/2" adapter) to the breaker bar and on the first try, the crankshaft bolt came loose no problem. This bar is a beast at 40" long, looks great and is machined well.The quality appears to be very good. Anyway, if you have a need for a breaker bar this size, I'd say this one will work well for you.

bought for a single bolt. The Honda crank pulley bolt. I had tried everything else. This held up just fine ...

I was having great difficulty trying to remove my Honda lawnmower blades with a smaller wrench due to the bolts being overtightened. so I ordered this breaker bar. When it came, I put my #14 socket onto the 3/8" drive of the breaker bar and it instantly removed the bolts. So I saved a bunch of money by not taking the mower to a repair shop. In my opinion this should be a standard in everyone's garage as it would save a ton of money.Very strongly built, fit the socket perfectly with the ball type connector and ratcheting mechanism. Great utility device for ease of removing any bolt.

Good quality tool , and at a good price

Works great, this was a beast. I was able to remove rusted bolts on my engine. Of course I sprayed WD40 on the bolts before I removed them.

Crap! It broke first time I used it! The head snapped off.

Good sturdy beaker bar. I recommend it.

I used this to remove and install spindle nuts on a 2008 F150.These nuts are supposed to be at 300 ft-lbs, but I suspect the mechanic that replaced them last put at-least an extra 100 for good measure.On the first wheel I did not use a cheater bar over this breaker bar. Yes - I got the job done, but my back revolted against my foolishness. On the next one I used a 6-foot, 1.5 inch diameter black metal cheater bar. What was formerly back-breaking became incredibly easy. Shockingly easy. (Shame on me for doubting Physics!)I am happy to have this breaker bar in my tool kit. My 2-cents is that if you are going this far (a 3.5 foot 3/4 inch breaker), then go ahead and also spend the extra on a 10-foot section of black pipe to make 6-foot and 4-foot cheaters. Nothing will stop you with that combo. Nothing.

This really big and long breaker bar will be handy for those odd times or odd items when i need extra leverage to "break" loose a nut or bolt. My sockets are 1/2" so i use 3/4 to 1/2" adapter.

It is sturdy enough but not for car tire lug nuts.

Build heavy duty. Very happy with my purchase.

Works as it should, great price.

This is the ticket for when your “trusted dealership” torques the living heck out of your nuts.Bought a heavy duty 3/4” to 1/2” adapter and like magic….it worked.It’s long.It’s thick.It’s wonderful.