INJS2065 7KG High Voltage Waterproof Metal Gear Digital Micro Servo

Works on latrax teton with slight teton mod. is a bit begger than stock. plenty of power at 6.0v

This is the first time ever I purchased these mini servos to replace the OEM worn out ones. I chose these because of the metal gears instead of the plastic gears offered by other brands. The servos, right out of the box, were easy to install and worked perfectly. I would highly recommend these INJORA servos I will purchase these again if needed for other projects.

Edit: Changed to 5 stars. Talk to Injora support, and they're sending me a new one. Just had send to them a video of a working servo plugged into the same channel. Bought 2 of these for Traxxas locking diffs. Both worked at first but one of them stopped after a few uses. Of course after the return window. Haven't contacted Injora yet.

Smoked my stock unit after some light mods to the truck, this had favorable reviews and was a good price so I went for it. Glad I did! Fits great, easy to plug and play, seems like this one should last a while. Happy with the purchase!

Much stronger and faster Trx4m servo than stock. Water proof for FRESH WATER. Salt water tried to kill it but a quick rinse and it was good to go! Don’t drive in into the ocean and you’ll love this servo!

I bought this for my last gen Traxxas TRX4 when the front differential servo stopped working. Unfortunately, this servo is slightly taller than the stock OEM servo. The plastic bottom which extends beyond the blue part of this servo is how much taller this servo is than stock. When attaching the servo holder this lower part of the servo hits part of the frame and causes the servo to tilt toward the battery box and rub against it, making the battery tray very difficult to screw back down. I ended up swapping my transmission gear shift servo out with this one. Then I ran into the next issue, the wire on this servo is shorter than stock by at least a cm or more, so I had to route the wire slightly differently to reach the receiver. Over all, this is a great servo. It is faster than the OEM and has metal shaft and gears, making it more durable. I've had the plastic gears of the OEM servo strip when installing the screw for the servo arm.

Worked great for 10 minutes, now it only turns left, i then tried it on 2 different rigs with totally different brand electronics, that doesn't matter, it only turns left now..... im going have to replace it with a Meus (i hope that is better long term.) I'm Very disappointed after wasting $18 plus installation time. It took longer to install than for it to break. For context I had this on a really light weight all stock no brass trx4m mb18 its only job was to be better than stock. I normally have good things to say about injora but Hmmmppf.

Worked great!

Works great in my 10pro, killed one adjusting EPA but they were way out so that's not Injora's fault

RAS sur ce servo. Très bonne qualité et fait le job sur un crawler 1/12.

Muy buena calidad

Den gör sitt jobb

Good 👍🏻 bought it because i shift my trx4 while on throttle and was sick of the stock servo stripping gears at 6v its nearly strong enough to force it into gear without moving unlike the stock one getting stuck sometimes when the gears weren't aligned