WUTA Removable Circle Leather Hole Punch Lacing Stitching Professional Working Hand Tool Kit Round Hole Puncher Craft Chisel Branding Design Circular Cutting Punches Kits (3.85mm-(2+6))

These hole punchers are FANTASTIC! The ability to switch out the tips when they get dull is wonderful, and also being able to go between pricking tips and actual hole punching tips is great! They are made fully out of metal and feel super sturdy, so I don’t feel like I’m going to break them when I’m hammering through thicker leather! I plan to slowly collect every width they have because these work super well!

I actually bought 4mm 2+4+6 punch set and purchased multiple of this item. It is a pain to change the punches each time so better to have it in full sets. This item comes with full set of pointy prickers + 3 extras and also it comes with 20 round hole punches to change it out. Extra 3 screws and a L wrench so I think it is a nicely packaged set. I had no problem using the round hole punch and goes through two flat layers of 6 oz leather stacked. I am using a raw hide mallet and a Low Density mat mounted to opposite side of my riveting block. I mainly bought these to make a cover for my handles very similar to a baseball sewing. Other prickers make much larger holes when the seams are pulled together. Happy with the buy. 8-25-22 Addendum Pointy prickers do punch well without touch up. I have a microscope at work so I am always in the habit of looking under it. Ends of the prickers are as machined and also studying the pricked holes, it is round but there is a light tear on the hair side, light and nothing to be concerned. I have a cloth lapping wheel with white compound and a quick couple of second (in handle), turn over seems to make the ends smoother and does seems to go in easier remove. Holes are bit cleaner. This is too much and normal person does not have this setup. Still happy and have two sets and tempted to buy more since these are on big sale now but not giving into the temptation. Addendum: 8-27-22 Last night was first time I used this for a holster type where I had to get the hole very close the the edge of the folds. Couple of issues with this type: - Careful which side the set screws are facing since these tear/seriously mark the leather when punching. - The end corners will make a gouge on leather if the holes are made in an inside corner. - The punches are mounted in about 1/4 in of metal so there is a big step that also will scratch the leather sides. It is just the design and construction of these type since there has to be some metal for these to sit in. - I will take these to work and grind the ends to an angle and round/polish so these issues are minimize. * For normal sheets, this works fine and still happy for these type of work.

And the term you’re looking for is replaceable/interchangeable teeth or removable pricking-iron teeth. Since these are 3.38 mm, I’d keep that exact measurement in the title because leatherworkers shopping for irons pay attention to spacing. Here’s a clean copy-and-paste version: Excellent Pricking Irons — Especially for a Beginner I’ve been leatherworking for about six months, and of the different punching and pricking tools I’ve tried so far, these WUTA 3.38 mm irons have easily been my favorite. One of the biggest advantages for me is the interchangeable teeth. I’ve also used irons with fixed teeth, and at my current skill level, I find these much easier to use and much easier to penetrate the leather cleanly. As I gain more experience, my opinion of the fixed versions may change, but for someone relatively new to leatherworking, these have been fantastic. The replaceable teeth are also a feature I would specifically recommend. If a tooth needs to be replaced or you want to change the configuration, you can simply unscrew the very small retaining pieces, remove the tooth, and replace it rather than replacing the entire tool. My only caution isn’t really a criticism of the tool: the screws and other small pieces involved in changing the teeth are tiny. Be very deliberate about where you work when changing them because they would be extremely easy to lose. I recommend working over a light-colored, uncluttered surface and keeping a small magnetic tray or even a bowl with a magnet underneath it nearby. As soon as you remove one of the tiny pieces, put it there rather than setting it loose on your workbench. It can save you from spending the next 20 minutes looking for something that practically disappears once it hits the floor. As far as the actual performance of the irons goes, I really don’t have a negative to report. They’ve been consistent, easy to use, and have given me excellent results. Of the leatherworking tools I’ve purchased during my first six months in the craft, these are genuinely among the best. If I were starting over and buying my first set of pricking irons again, I would absolutely choose these.

This is a very accurate set of punchs for leather work, high quality, and quite frankly very well packaged.

I've had this set for a while. It's done well for me. Makes hand stitching much easier than with other types of stitching sets. The quality is not the best but good for the price. I bent one of the "blades" on my two hole one trying to punch leather that was a little too thick. Of course it has the extra blades with it. I like it and would buy it again. I would say don't try to go over 8 to 9 ounces of leather at a time with them and it'll be fine. Worst part is trying to pull the big one out of the thicker material.

Excellent quality perfect spacing very sharp

The hole punch inserts came dull. The securing screws are flimsy so the inserts fell out even after tightening them in place. Save your money and get better quality ones

Works great at first, then dulls rather fast. I have no idea how to sharpen such a small punch, probably requires buying new parts.

3.85のサイズを購入しました。思っていたよりしっかりとした作りで満足しています。

穴に詰まった革が取り除き易くて良いです、穴も綺麗にあきます、以前使っていたものは、すぐ詰まり取るのが大変でした、欠点は、ハンドプレス機には使え無い所です

コメント評価以上に良い！コメント評価では穴詰まりで使えない等の評価でしたが、類似する商品が見つからないため、ダメ元で購入しましたが、長い目で見ないといけないのかも知れませんが、切れ味良く満足です。丸穴あけるの際は、コルク板などの上でないと裏側の穴が小さくなり針が通りにくいです（要注意）10本目と2本目を買いましたが、4本目の際は、10本目を4本目出来るので便利！

Perfectos