Super Flexible Pressure Washer Hose 50FT for Power Washer Replacement, Kink Resistant Extension With Leak-Free M22 Female & 3/8" Quick Connect Adapters, 1/4" 3200 PSI, Green

Im a very high pressure technician, like 30,000psi hoses and pipe. There are hoses for certain applications, like some are basically 8 layers of SS316 wire with thermo jackets, yeah they last forever. They are like pulling a 7/8 cable to your work area, they really are just chunks of metal. You dont need that for a pressure washer. Ive also worked with polyamide parker hoses, very expensive. They will handle high pressures and flow, but like this hose, they are easier to damage. You can still kink a 1" hose with 5,000psi in it, it probably will survive for a little while under load, but will eventually fail since you rearranged or damaged the braid. So... No quality hose will stand up to neglect under pressure, just like a pipe thats kinked or warped. It may survive, but you already damaged it. These fittings didnt leak, but i was careful to adapt between my m22x14 (id) and m22x15 (id). No fitting will seal with 1mm gaps. The hose jacket is soft and seems nice. The hose is very flexible, similar to my flexzilla low pressure hoses. The end connections fit together smoothly, no nasty machining burrs from worn out tooling. The quick connects made up easily and feel as nice as $200 high pressure fittings. Best of all NO LEAKS! I made up an extra jumper hose to test the coupler they included. The hose is bundled very tight, uncoil it before applying pressure. If it cracks when you unroll it, like i did initially, you are breaking strands. I stopped and bleed the press off and continued. You CANNOT kink these hoses. They will fail. Just treat your tools nicely and I expect this hose to dryrot before it breaks. BTW it wraps nicely in big loops on a wall hook much better than my oem thermoplastic 1/4 hose and much much better than my 3/8 thermoplastic hose. Those thermo jackets seem more robust for dragging around on sharp surfaces, but even they have a few small gashes in them.

Flexible, long enough to do most tasks. Like the quick connect fittings.

The level of kink resistance is more on the kink-proof side of things. The only time I could get it to kink is if partially stuck behind a tire but all bets are off when that happens regardless of the type of hose. I like that it is very flexible but I wish is could be slightly more flexible or at least less inclined to return to a previous shape when trying to roll it up by hand although that minor annoyance is totally negated when using a hose reel. The fittings that came with the hose were all well made and providing more than was needed for the hose itself to include connections for what the hose might be connected to were all put to very good use and saved me a LOT of time trying to order each individually making sure all the sizes and fitting types were correct for each application. The only "Con" I have is that one of the fittings' O-ring had a cross sectional diameter that was too small and so leaked but replacing it with a larger O-ring did the job and, of all the connectors included, only one had an issue. As an aside, it's always a good idea to have on hand spare washers for quick-connect fittings because unless one negates the use of quick-connects by keeping everything connected, the O-rings will wear down and, always at the worst possible time, thank you very much Mr. Murphy! I've used the hose a few times now and getting it stuck behind wheels and generally dragging the length around on asphalt all the time, I've seen no wear or even marring so it seems ruggedly built. By way of comparison using an oft mentioned "blue" pressure washer hose that is also very flexible and kink-resistant but that goes for around three times the cost of the Yamatic hose, I like my "blue" but not at three times the cost. If needing another hose, which is very likely, I'll get the Yamatic.

I recently purchased a pressure washer hose, and I've had a mixed experience with it. The flexible hose is a great feature for storage and makes it much easier to maneuver without getting tangled while washing my car. After several months of use and numerous washes, the hose itself has held up well with no leaks or issues, which speaks to its overall quality. However, the quick-connect pieces included with the kit have been disappointing. Despite being made of metal and appearing durable, they don't perform as expected. The connectors tend to get stuck, making it difficult to detach the hose. Additionally, one of the connectors started leaking, and despite checking the O-ring and ensuring the threads were taped correctly, I couldn’t find a reason for the leak. Overall, the hose is of good quality and performs well, but the quick-connect pieces are not up to the same standard. I would recommend the hose itself, but be prepared to possibly replace the connectors with something more reliable.

Works just how it is described. rolls out flat, no kinks and rolled back up easily to store with my power washer. It connected quickly and fits perfectly.

Really happy with this and that it comes with a good amount of attachments and quick attachments will give an updated review for durability soon

I bought these to replace the hard hose the came with the unit. These still twists and get mangled but they are a little easier to manage. I had to buy cord reel to make it easier to store and use; otherwise, it gets twisted.

Got a Ryobi 1800 psi Electric pressure washer from HD for 100 bucks. The hose that came with it kinks and rolls up onto itself. This one does not. Pulled it out of the box and laid it out flat with zero issue, plugged it in and was ready to go. no kinks or rolls. Thickness quality feels very nice. No leaks. LOVE that it came with its own quick release attachments. Compatible with your normal standardized pressure washers. Great deal for under 40$

Sehr toller Schlauch sehr stabil top

This hose is soft and flexible 10x better than the original hose.

Superb quality hose and good selection of fittings. The hose and fittings are very good quality, the fittings being butter smooth with no leaks. I purchased the hose along with Fai Top 4000PSI High Pressure Washer Gun to fit on my Karcher K4 . My outside tap is at the back of the building and I wanted to to just set up the Karcher near the tap then have a long hose that does not get tangled up with the main hose and extension lead when running to the cars when washing The hose is far superior to the original Karcher hose, it does still tangle but not as much as the Karcher hose and is much easier to wind up when finished Both gun and long hose much better than expected.

Good quality. If anyone wants to know, yes, this fits on an old Bosch Aquatak 10 pressure washer without any adaptor.

Ok