Crystal Clear Epoxy Resin Kit: 1 Gallon & Bubbles-Free | Auto-Defoaming Formula Self-leveling high-gloss with pumps; Resin and Hardener for coating, table tops, molds Jewelry

Easy to use pump bottles, dries hard & clear, have made dozens of things out of what was in these bottles.

This is my second time ordering this. I don't get many bubbles if I use a machine to mix or by hand. I let it sit for 5 minutes and it's ready. It does seem to be a little thicker that some I've used but I kind of like that. It is a pinch soft next day but it makes it easier to get out of mold. It gets super hard just leave it alone after demolding for another day. I will be buying this brand again....it's pretty flawless!

I can’t emphasize enough the ease of use and quality of product. I wish I knew about this epoxy years ago because now I’m finding all sorts of uses for it took me a while to remember why I originally bought it. I’m tempted to use some for hobby projects I never do. Because it’s so easy and crystal clear when I have had unused portions in the mixing container I’ve experimented with different things and it’s amazing. I’m thinking about cutting out photos and magazine pics there’s just so much. Two top takeaways. Ease of use and clarity. And it does an excellent job adhering to metal to patch dents. I could go on and on

I was about to quit playing with resin after going through way too much money and ruined products because of other resin types. Then I tried this one and "I'm back in business, baby!" It does need a bit of work, but the results have been a resin that release the bubbles better than anything else I've tried, so to my fellow newish resin enthusiast... Here's how I've had best success: 1) Measure the needed amount of each into separate cups (I use reusable hard plastic ones with lids, so I have less trash waste) and place them in some warm (not hot) water for 3-6 minutes depending on the amount. 2) Mix the A+B resin in a new cup. I use an electric resin mixer and it does have to be mixed a bit longer than other ones - really look for those stringy part in there! 3) Place the cup back into the warm water for 3-5 minutes. 4) Pour slowly and then use a toothpick or craft stick on the sides of your product to make sure no bubbles got stuck there. And remember, the deeper the project the harder a time bubbles have releasing, so work in layers if you must. 5) Do your usual heat gun/lighter tricks, and voila, you'll *most likely* have a nice mostly bubble free result! One last thing... This is a lower viscosity resin and works great in molds, but I found that it really wants to fall over the sides when used as a top layer on coaster for example (even after a 15-20 minute work time), so you may want to use it as the bottom layer and then top coat it with a thicker working resin or wait long enough till it's thickening up a good bit itself.

This resin is very hard to use. It is NOT easy to remove all of the bubbles and there are more of them than I have seen with other products. When put in machine to remove bubbles, it just ends up with a froth of material. Even running it through 2 cycles is not effective. By that time, the resin is warm and starting cure process. I did get this at a sale price, but I wonder (based on other reviews) if this was the unsatisfactory product that many complained about and that the company (or Amazon) was trying to clear from inventory. I have used other Teexpert resins with good results. I am afraid to trust this one. I am updating this review and adding stars. I found out accidentally that I was using it incorrectly. Unfortunately, directions did not cover everything I needed to know. Do not put this in degassing machine; it multiples the bubbles and getting rid of them afterward is impossible. No need to warm the resin, unless your work room is cold. There did not seem to be too many bubbles after mixing, so I waited about 7 minutes and poured into molds. I had to let it sit unattended for 10 minutes. When I came back, one or two spritzes of alcohol got rid of the bubbles. The more you do to this resin, the more you will see bubbles. I found I can let it do the work for me. I use only shallow molds, it works for these. However, it is not good at top coating. You can see how it did not level at the edges on this shallow coat.

"I’ve been working with epoxy resin for over 5 years, and Teexpert is the only brand I truly like. It doesn't yellow, it's a 1:1 ratio, and it's very easy to mix. It has never let me down, and I’ve never had a single issue with it. I’ve tried several different brands, but Teexpert is definitely the one that best suits my work. I highly recommend it; it has consistently delivered great results."

Hands down my favorite resin. About two yrs ago all the resiners on YouTube were raving about this product. Now because of other free resin they get so they will recommend it, this one seems to have been forgotten. I have no problem with bubbles as it cures clear producing a professional look. I have tried the other popular brand that is now being pushed and just haven’t had as good results. Teexpert has a great product.

This resin has become my go-to for coating and casting projects. It pours smooth and self-levels beautifully, leaving a high-gloss finish that makes pieces look professional. I’ve found it needs a little warming to thin it out for easier mixing, but once that’s done it handles like a dream. Best part—there’s hardly any odor, so I can work without feeling like I need a gas mask. Reliable, versatile, and a solid staple for resin work.

Good

Best resin to use. Definitely recommend. Easy to use with little to no bubbles.

The product is good but the packaging says NO SHIPPING COSTS. I was charged two shipping costs.