Karltys Car Phone Holder for Jeep Renegade 2015-2024 Accessories Renegade Cell Phone Holder Air Vent Mount for 4-7 Inch Phones Hands Free Thick Case Friendly Mobile Stand

I had an older mount that I accidentally broke and I needed a new one. I found this one after some searching and saw that it had a special mount compatible with my Jeep Renegade's dash vents, and it seemed like just what I needed. Got the new mount and I was able to assemble it with very little issues. The connector was a little difficult to get into the part that mounts to the Renegade vents, but I was able to gently hammer it in with a rubber mallet and then it snapped right into place on my Renegade. I took my old phone and attached it to the holder and shook it all over the place to see if I could get it to dislodge and it held on tight despite making motions you likely wouldn't even have while off-road. It's a simple design, not overly complicated to use, you expand the holder, and when you place your phone against the plate it clamps down on the side. I use a fairly hefty phone case because I'm clumsy, and it has no problems holding it with the case as well. The version that I bought does not have adhesive/suction, so I didn't rate that. I would probably rate this a 9/10 on a larger rating scale, only thing that was that the mount was slightly difficult to put together as mentioned I had to use a rubber mallet to gently put it into place, although it may have just been a tight fit with the particular one I got as I'm sure manufacturing isn't always perfect.

Just to inform that this phone holder securely holds my Motorola phone on the dash of my Civic. I tried multiple styles, but this one works perfectly (my phone has a case and is wide/thick as a result....this holder works perfectly for a thick phone). Included is a special adapter that clips (top and bottom) to the silver rails of the honeycomb dash...I have my holder installed to the immediate left of the emergency flashers button. The special adapter has little notches on the top/bottom, which you gently...GENTLY...depress the adapter top/bottom to get the notches behind the silver rails. As soon as you release the adapter the notches connect to the dash - removal is simply reversing the steps. The included adapter is key to proper/secure fit for a Honda honeycomb dashboard. Once installed where you want, it's easily adjusts with a tilt capability, and simple open/close mechanism. A short power cable can be used to charge your phone while mounted (the usb plug is about 12" below my preferred mounting location next to the hazard lights). Personal review (uncompensated) of a great product to fit a specific use case (the honeycomb dash of the new 2024 Civics).

I wanted something simple that could hold my phone when my car is loaded with my family. This works as should and fits perfect for 11th gen civics. Should work with Acura too since it shares the same honeycomb vents.

I am afraid I will break it if I take it off the vents as it doesn't come off easy. I also have trouble getting the part that slide into the part on the vent to stay or snap into slot. But I do love the setup

This make the use of the flashers button EXTREMELY difficult & INCONVENIENT. It gives me the need to REMOVE it (slide it out of the 'clip-on') while on MOST of my drives, since it is MORE of a NUSSIANCE than a HELP and have the "holder" either sitting in the way of the console, (underneath HVAC), have the NEED to put it either in the armrest center console or glove box so it is out of the way until IF it is needed which takes up VALUABLE space in those areas! (I ONLY use it for longer drives when it is accessible for my music apps). I keep my phone in a clip-on holster and THAT is easier than using THIS especially since I can make/receive calls from the vehicle and have my texts read to me while driving, pretty much rendering this thing USELESS 99% of the time for me. I only bought it for the 1% of the time I would like to have my phone out of my holster & want to look at my phone's screen. This is NOT as snug as it SHOULD be as the phone wobbles when using the touch screen. The piece that goes into the slot IS pushed down ALL THE WAY, BUT that seems as it SHOULD 'snap-in' to make it more secure. It DOES hinder the flashers button, (as mentioned) and it IS inconvenient. I DON'T have much hopes of the "close-shut" mechanism due to it feeling "not a secure hold" that (in my experience with it) seems to just 'close' and not really 'hold-tight' the phone. Even with the ball joint knob TIGHT (not too tight to strip or break it) , the whole thing STILL wobbles as it is NOT a "snug/tight/SECURE" hold which makes for difficult phone use & inadvertently pressing everything else that you are NOT purposely pressing. I have a vid & pics posted for your reference of it installed on my CX-5. IF I would have something to positively say is that it does not hinder view of the infotainment screen, and has minimal affect on the air flow from the vents. Until it gets aggravating enough OR I find a better holder, I will keep the 'clipped-on' part to the dash and just slide the holder in when/if needed..BUT AM LOOKING to REPLACE this with a better option. THIS IS AN HONEST REVIEW FOR A "PAID FOR BY ME" AND NOT A "VINE FREE" ITEM AS I PAY FOR EVERYTHING I GET, AND THAT ALSO MAKES MY REVIEWS TRUE & HONEST!!

As you can see on the picture, I tried many options and some accessories were in the way of the wiper handle or phone was exposed to the sun. Also tried cup holder phone mount but used it for a USB fan instead. This vent phone mount is a good choice for 2023+ Civic models. Its between the AC vent. It can clip a Qi2 MagSafe cooling charger with a standard ball joint size. Now my phone can charge properly without getting hot. Hope this helps for the new Civic drivers.

The phone holder has been working exceptionally well since I purchased it. During the last hurricane, we experienced a power outage that lasted over a week, and this device really came in handy when we had to sleep in our car. It securely held my phone on its side without any issues, and I haven't experienced any wear or tear. The attachment has never fallen off, making it the most durable phone holder I have owned. The quality is excellent and perfect for the price. The only drawback is its placement; it covers the hazard light button. To activate the hazard lights, I need to raise the phone or remove part of the holder.

The title says it all, it’s a great addition to my car, and mounts easily. The base plate was installed a few months ago and it hasn’t moved since. The phone holder does its job and fits my phone even with a case. I can drive across any terrain and have peace of mind knowing my phone won’t fall out of the holder onto the floor.

منتج ضعيف انكسر

Voll gut und passgenau

Does the job. Bought it December 2023, I rotate it very often (vertical or horizontal), and today it broke. So I will say that for the price, it lasted.

Werkt perfect. Heb hem voor s24 ultra. Met een erg dik hoesje dan is hij wel wat aan de krappe kant.

Tried other holders. But this is the best fits perfectly and works great. Just push fits into place on dash and holds my phone in its case really firmly