1000GPD Reverse Osmosis Water Filter, NSF/ANSI 42&58&372 Standards, Alkaline Mineral pH+ Reverse Osmosis System, Tankless RO Water Filter, 2:1 Pure to Drain, Reduce TDS, PD1000-TAM4

I installed this a month ago. Looked at the lower flow rate versions of this and at other brands with similar systems, lower flow rates but certified claims. Decided to spend the extra and opt for the 1000 GPD as it had twice the flow rate of the brands with certificates. I suspected that if went to the bother of researching and then plumbing it in, I probably quickly get disappointed that I hadn't spent the extra money for the best flow rate. I imagined that the slower flows I get in other people's houses, would eventually make me fill kettles from the ordinary tap for speed. So glad I did. Mounted this on a foam block to reduce the cabinet noise - it's pretty quiet. I can get pint glasses of water quickly, and I absolutely love the taste. My tea no longer has a scum and my coffee maker tastes so much better. Week before I added it, the council were working on our street water supply - the after taste was almost undrinkable. What a relief to get this in.

Great filter easy install

So far is perfectly working good

Purchased on 7 February, this was the company’s top of the range reverse osmosis unit, costing around £800, so expectations for reliability and longevity were understandably high. The system has been used in a two-person household, despite being marketed as suitable for a family, so it has not been heavily used or pushed hard in any way. After just under two years of normal use, the unit has developed a significant leak. This occurred shortly after the 18 month warranty period, which was frustrating to discover. As the unit is installed under the sink, the leak wasn’t immediately obvious, but it has since caused damage to the kitchen cupboard base, which will now require repair. For a premium-priced filtration system, this level of failure in such a short timeframe is well below reasonable expectations. This does not appear to be wear and tear, but rather a durability or quality issue, especially given how lightly the system has been used. I’m leaving this review to be honest and factual, and in the hope that the manufacturer will stand behind their product and offer a reasonable resolution. A system at this price point should last considerably longer and certainly should not be causing property damage. At present, based on this experience, I would struggle to recommend the product. I hope the company chooses to engage constructively and demonstrate the level of customer care expected from a premium brand.

Easy to Install... Great product! I have 2 of these now in 2 houses - Norfolk UK. In UK suggest adding the George Fisher fitting to connect to Washing machine fittings to the suggested buying options!

Good product. Water flow is not as much but it does what it says.

It tastes really good, tds level is acceptable

Bottom line is buy a traditional RO unit with the storage tank. So I have a business installing RO units for clients. I bought one of these to try for myself before buying wholesale from china and selling to clients. Its the 1000gpd unit. I replaced my 7 year old iSpring 7 strange RO with tank. I wanted to love it. But it's a big disappointment, and it will be going in the bin. The major problem: The TDS of my old RO was around 10ppm before alkaline stage and around 30ppm after alkaline. Instant great ppm. But this frizlife unit has high ppm output for the first 80 seconds or so. Then finally after 80 seconds the ppm becomes low. But getting a drink of water, or filling the kettle all happen in way less than 80 seconds and while the ppm is high. I have read that this is something to do with the way these high output filteres work, they leak bad water around them for the first few seconds of use and then they become very good after a minute of use. Unfortunately the only way to get good water is to run the tap for 80 seconds every morning before using the water, and then 80 seconds again if you have not used the tap for several hours. who is going to do that? With the old system my kettle did not build up cal, with this system it builds up a lot of cal. Buy the way, the built in TDS meter on the unit itself lies to you. It will only take a reading after the tap has been continuesly on for over a minute. It then stores that reading until the next time that the tap has been on for over a minute. If it showed the truth every time you used the tap it would always be over 100ppm. So the unit is not fit for purpose. As people will not be getting the advertised ppm and the ppm on the machine is misleading. So in my opinion this is false advertising and is a scam. People think that they are drinking 15ppm but really it's 130ppm in the glass. More reasons why the traditional tank unit beats these tankless systems: Noise. Tank system is VERY quiet. This system is noisy. Cost. Tank system costs £100-£350 depending on brand. This system RRP is £750! Filter changes. Old system is around £30 per year. Or less. This one is way more. Look up the filter costs. And a side note, after 2 months of use mine has an issue now where it dose not store presure properly anymore. Meaning that when you turn the tap on, you have to wait 1-2 seconds for water to come out. Which is not a long time, but the old tank system was instant. Buy a traditional RO system. There are many to choose from and they are much much better. Tried and tested.

Recensisco il Frizzlife PD1200 dopo averlo installato nel sottolavello e averne misurato i parametri chimico-fisici reali prima e dopo il trattamento. Spero che questa analisi aiuti chi, come me, ha problemi di spazio al millimetro. ⚠️ CRITICITÀ FONDAMENTALE: Le misure del dispositivo su Amazon sono SBAGLIATE! La scheda tecnica ufficiale inverte clamorosamente l'altezza con la profondità. Se avete spazi ridotti, prendete nota delle misure REALI scocca a scocca che ho preso con il metro in mano: Larghezza: 15,5 cm (perfetto, molto stretto, scivola nei corridoi laterali vicino alla pattumiera). Altezza: 38 cm (un'ottima notizia: essendo basso passa comodamente sotto i sifoni e gli scarichi bianchi del lavello). Profondità: 47 cm (ATTENZIONE: è molto profondo, arriva quasi sul fondo del mobile da cucina standard, lasciando pochissimo spazio sul retro per la curva dei tubi). 🚰 COMPATIBILITÀ CON RUBINETTO A 3 VIE (No errore) Ho installato la macchina collegandola direttamente al mio rubinetto a tre vie preesistente (un Franke), lasciando il rubinetto "intelligente" fornito da Frizzlife dentro la scatola. Confermo che il sistema NON va in errore se il cavetto del display del rubinetto non viene collegato. La macchina rileva la pressione, si accende e si spegne regolarmente. I dati del TDS e dei filtri si leggono comodamente dallo schermo LED sulla scocca sotto il lavandino. Per il collegamento al flessibile da 3/8" del mio rubinetto, è bastato un semplice raccordo di conversione da 1/4" a 3/8" maschio. 💎 QUALITÀ DELL'ACQUA E ACCOPPIATA WATERDROP (I Numeri) Per evitare un'acqua troppo "vuota" e acida (tipica dell'osmosi pura), ho installato in linea (sfruttando lo spazio avanzato lateralmente) un filtro remineralizzante Waterdrop da 1/4" ad innesto rapido. I risultati dei test digitali sono sbalorditivi. Partivo da un'acqua di rubinetto medio-dura: Acqua di rete (Non filtrata): TDS 236 ppm | Conducibilità (EC) 470 uS/cm | pH 6.9 Ecco i parametri dell'acqua filtrata in due scenari diversi: A regime (Acqua in scorrimento continuo): TDS 32 ppm | EC 66 uS/cm | pH 7.04. La macchina abbatte l'86% dei solidi totali (via calcare, cloro e metalli) e il filtro Waterdrop (compatibile con Frizzlife RO) corregge il pH portandolo a una perfetta neutralità (7.04), restituendo un'acqua oligominerale leggera e dal sapore eccezionale. A riposo (Primo bicchiere dopo qualche ora di fermo): TDS 56-77 ppm | EC 115 uS/cm | pH 7.5. Un comportamento del tutto normale dovuto al "tempo di contatto" prolungato dell'acqua ferma dentro le rocce del filtro Waterdrop e al leggero TDS Creep della membrana. L'acqua si arricchisce maggiormente di calcio e magnesio, diventando leggermente alcalina (pH 7.5), ottima da bere e dolcissima. Basta far scorrere l'acqua 10 secondi per ritornare ai 32 ppm di base. 🏁 CONCLUSIONE Se avete la profondità necessaria nel mobile (almeno 50-52 cm per far stare i tubi), a questo prezzo è un best-buy assoluto. Produzione diretta potente, flusso veloce dal rubinetto e qualità dell'acqua paragonabile alle migliori marche in bottiglia di vetro. Consigliatissimo! I parametri dell'acqua non filtrata (analizzati da un laboratorio analisi accreditato) erano Conducibilità elettrica (EC) uS/cm 640, Solidi dIsciolti totali (TDS) 410, con metalli pesanti presenti anche se al di sotto (di gran lunga) ai limiti di legge. Aggiornerò la recensione nel caso qualcosa cambiasse nei parametri o nella funzionalità del dispositivo

Ho acquistato la versione 1000 GPD con alcalinizzatore esterno per sostituire il mio vecchio impianto di altra marca. Immediatamente ho notato la qualità dei materiali molto superiore alla mia vecchia macchina e dopo la installazione fatta da me ho apprezzato la maggiore portata d'acqua, la silenziosità, il sapore. Ho voluto apportare una deviazione all'ingresso dell'alcalinizzatore con un rubinettino per prelevare acqua osmotizzata pura per il ferro da stiro, per l'idropulsore dentale, per diluire detersivi concentrati ed altri usi simili. Ho lasciato il mio vecchio rubinetto ma devo dire che quello Frizzlife è più bello ed appena avrò una occasione valida provvederò alla sostituzione. Consiglio decisamente Frizzlife.

Facile à installer. Excellente filtration, l'eau n'a plus de goût. Service client extra

Utilisé depuis plus d’un an, aucun regret sur cet achat en complément d’une cartouche minéralisante. L’eau est vraiment agréable sans mauvaise odeur. Depuis l’usage de l’osmoseur, nous n’avons plus besoin de détartrer les machines à café. C’est vraiment un super produit. On continue à compléter notre hydratation avec qq bouteilles d’eau pour les apports en minéraux. Nous sommes alertés lors de la fin de vie des filtres. Le changement est d’une simplicité enfantine.

The Frizzlife 1200GPD Reverse Osmosis Water Filter is a solid option for anyone serious about improving their drinking water quality. With its high 1200 gallons per day capacity, it’s more than capable of supplying a household with clean, crisp water. Installation is reasonably straightforward for anyone comfortable with DIY plumbing, and the system comes with clear instructions and all necessary parts. Water taste and clarity improve noticeably, removing common impurities, chlorine, and other off-flavors. The filters are easy to replace, which keeps long-term maintenance manageable. The only minor consideration is the system’s footprint—it requires space under the sink and the usual plumbing connections, which could be a factor in smaller kitchens. Bottom line: a high-capacity, reliable reverse osmosis system that delivers noticeably cleaner water—excellent value for a home water filtration upgrade.