RackChoice 2U Micro ATX Compact Rackmount 2 x 5.25 Chassis Support ATX PC PS2 PSU with Side 80mm Fan

Better quality components than most. Thicker metal, precision threaded bosses & holes, high quality screws. Lacks USB-C. Excellently positioned drive bays, power supply mount etc. BRUSHLESS FANS. I loaded it up with: - 5.25" full-sized BD writer - 4 3.5" drives - mini-ITX with M.2 - full-sized power supply. Had to drill holes above the PSU, or it would have nowhere to draw in air from the top (PSY fan is on top). When you do this, be very careful with metal shavings! I highly recommend this case.

Decent quality chassis. Holes and slots are in the correct locations. My 3 gripes: 1) Rivet heads poke out the bottom and scratch anything in the rack unit directly below. 2) USB 3.0 internal cable is way too long. It's also really stiff and difficult to coil up and tuck away. 3) Most chassis I have seen are 430mm width. This chassis measures 427mm. So don't expect it to work well with a universal sliding rail. You may need to shim the slides somehow.

Gets the job done! While extremely basic, it's all you really need. It looks great when mounted in a rack. The short depth is nice for running a hypervisor.

Fit my 2x5.25" SATA Bays well and it works great on my rack. Not much to review about other than its a quality chassis.

I got this case to run a small video management system out of a rack mounte enclosure so I didn't need anything fancy. The price was right for this so I went with it. On opening the box, I noted that the case itself and it's materials seemed to be a good quality, not cheap thin gauge steel, it's really pretty solid. The front bezel has a very nice design and look to it. Pretty much everything I expected from the pictures. Then I noticed there was one BIG flaw with this case that wasn't mentioned in the description. It says you can use any PS2 power supply, however that isn't really accurate. While any PS2 supply will mount and fit in the case, as most ATX power supplies made in the past decade+ have bottom mount fans that is an issue. This case unlike others similar to it, does NOT have exhaust holes in the bottom of the case where the PSU mounts. This means that if you have an ATX supply with a bottom fan, its not really useable. I guess if you really wanted to you could drill your own holes but that seems a little silly for something that should be done at the factory. Another option is to find a side exhaust or rear exhaust PSU but those are nearly impossible to find these days and often times cost even more than bottom exhaust. In my case though rather than do all of that, I just used an SFX power supply and an ATX adapter plate which gives about 3/4" clearance on the bottom for airflow. I gave this 4 stars though because other than the design mistake for the PSU area, everything else about it is solid including it's price.

Couldn't find a power supply that vented out the back of the case. I had to drill holes in the top so that an ATX power supply exhaust fan would work. Don't buy this case.

Sturdy space savings at a great price! PLEASE NOTE: this model requires a rear facing intake fan on the power supply. There are no perforations to accommodate the new standard bottom fan PS. Search for rear facing fan power supply. One of the sellers carries a model.

No ventilation over or under PSU mounting area. Brand new PSU does line-up with screw holes provided for PSU. It would be nice to have some ventilation holes over the general CPU area. If you use a CPU cooling fan / heatsink with too much height, very little room is left to move air through that space between the fan and the case. This is otherwise a very solid case. Some minor changes to the case cover would make this a 4 or 5 star product.

Muito bom. Só faltou um furacão inferior para dissipação do calor da fonte de energia, no mais muito bom.

Some of the reviews here are harsh, this is a very low cost rack mountable ATX case. You get what you pay for. Here are the details you should know: - Construction is all steel, but cheap, all edges are sharp, and something to be aware of when building. - The two included fans require 12v power, they do not use a fan connector. If you want fan control and status monitoring you will need to replace these fans. They are loud as well, Noctua makes a great 80mm fan. - Like all ATX rack cases your cpu cooler options are limited, both due to max height, and limited space for a backplate. - There is no power supply ventilation, the reason is if you were to fill a rack for these the intakes would all be blocked. You either need to find an old school, low wattage, PSU -- OR use an SFX power supply with an ATX bracket. This allows plenty of room around the power supply to breathe. The SF750 from Corsair is a great PSU, 80+ Platinum as well. Overall, there were no surprises with this case. It does the job, and at the price it owes me nothing. If you want a beautiful rack case you will need to bite the bullet, 5x your system budget and go enterprise!

Sturdy and works as described. The drive bays are a little awkward, but trying to cram everything into a 2u package... it is what it is.

So they want extra money to take a drill and make holes for top mount PSU fans? Jokes on them I own a Dremel. Works well, being cheap makes it fun to end up doing crap like just cutting it to work. Cheapest 2u I could find so it is what it is.

The front fans are good but loud but if keeping it locked up in server room it shouldn't be a problem