WEN CT9110 110-Inch Track Saw Track Guide Rail and Adapters

These are a fantastic, low buck alternative to the expensive name brands. Mine arrived without any damage, nice and true for each piece. The only issue I had was with alignment. You're going to need a long straight edge or level because you can't trust the ends to be square. In other words, do not butt them up against each other - leave a slight gap and use the straight edge to insure the two pieces are straight before tightening the rail screws. (Tip - try joining each side for the best fit - there was a definite difference with mine.) Also had a slight lip on one side of the joined section. It didn't affect operation in any way but was annoying - rectified it by JB welding a washer to the underside of one section that protruded past the edge ... thus preventing the lip from occurring. IMO, that's a small price to pay for such an incredible value. I actually plan on buying another set to keep one permanently in 110 in mode and have the shorter sections ready to go.

I'm impressed with these tracks. I have the Festool track saw and these work perfect. I had to tighten the knobs a little to snug up to the rail but that took 5 seconds. I have one track for the festool and making rips on longer pieces was a chore trying to line it up perfectly but with two, not an issue anymore. Used them yesterday and all went well. The cuts on the end aren't perfect but if you put in the top connector, just put a 6/8' level against them to make sure they're straight with each other then tighten the two sliding connectors. Once I did it, I moved them around, flipped them over...etc and they stayed true. Ripped about 80' in varying orientations and no issues at all. They feel heavy duty, even more so then the Festool track. They're definitely heavier so that's good. They also come wrapped with these two black molded end pieces...keep those. Once you take them apart, put the end pieces back on and that keeps them together and less likely to bang around or damage ends. All in all for $74 this is a steal. I also ordered the Melotough track holder for $40. It can apparently hold 4 tracks. So I'll keep these and the Festool on there so they're all together. Can't speak for other brands but I know Festool uses the same track as Makita, Milwaukee, Metabo and a couple other brands. Might have to adjust the knobs on your particular saw but it's VERY easy and quick. Better then spending double or triple on name brand. Happy cutting!

Worked very well with a track saw to help trim down our boards for our basement walls! We used these for cutting the boards on the wall of the picture (not the cedar boards)

4.5 Star. These work great with the Milwaukee Track Saw. I ordered two sets for the cost of a single Milwaukee 55" track. The anti tip feature works great. They are smooth gliding. I then cut one of the tracks down to a 31" and 24" track, great for cutting 24" and 12" stock. In total when doing this you end up with a 110" track, 55" track, 31" track and a 24" track. Excellent value. The half star is removed for the following reason. I am not 100% happy with the combined tracks for the 110" full length. From the box the ends are not cut square and hence when tight together they do not make a straight track. I am going to cut them square myself which should make this a non issue, however, I shouldn't have to. It's rather is that everything else being so nice they can't keep the QC on the cut ends better, it's such an easy task.

Compared to the name-brand tracksaw track, this track for the WEN track saw is a bargain. It won’t work with other brands, but the combination has let me make really smooth and accurate cuts in plywood for low cost and low effort.

Impressed by the quality for an entry level saw. Worth the money. Held up well on a 400sf composite deck.

Works great with my Wen saw. Great for cutting sheet goods for cabinets. Two piece easy put together for full length.

I'm not the biggest fan of WEN tools, but these tracks work perfectly with the Milwaukee track saw. For the price you are getting two 55" tracks at half the price of big red. There's objectively no downside to these compared to OEM. With the money saved you can get a couple sets of good clamps.

These arrived well packaged, zero damage from shipping, they had nice heavy plastic guards on the ends of the rails. The work just as they should. The build quality matched the Milwaukee tracks I already own. I can confirm the Milwaukee track saw fits these tracks like a glove and helped my make some long straight cuts.

Muy buena compra, facil de armar y cortes perfectos con mi sierra de inmersión wen, bajo ningún motivo corten el plastico negro, la sierra lo cortara en la primera pasada y quedara justo al filo del corte.

When I purchased these I happened to have a Milwaukee track next to it. The extrusion that the saw slides on is slightly bigger on the Milwaukee, such that when I dialed in my m18 track saw on the WEN tracks, it wouldn't slide easy on the other. So point being the cut strip is your line of cut so if you swap between track brands it will mess that up. Decided to go with the WEN for the way better price point and marginal decrease in quality.

Buena calidad

El producto llegó sin una de las partes de plastico que protegen las orillas de los rieles y la otra está rota. Afortunadamente los rieles no tienen daños graves solo un ligero raspón en una orilla. Todavia no he recibido la sierra de inmersión por lo que no he podido probar los rieles.