ZMJH ZMA102D Bidet Toilet Seat, Round Smart Unlimited Warm Water, Vortex Wash, Electronic Heated, Warm Air Dryer, Rear and Front Wash, LED Light, Need Electricity, White, (Round)

Let me say that I have two of these, one is for my grandmother who just started using it and is already liking it a lot. She has trouble wiping and this has been a great help to her, As for me I love it just because I find toilet paper a waste of money and a disgusting precedent that really only us an America seem to be holding to out of habit. Those Charmin commercials are convincing apparently lol But truly, I got myself one of these after getting one of the cheap $20 ones like 2 years ago and finally just decided to upgrade and I'm more than delighted I went with this. There are three settings for the temperature of both these seat as well as the water, The fan could blow a bit harder but it does the job fine and puts out nice warm air also with heat setting options. If I had one real complaint it would be the proprietary attachment for the water line. If you get one of these you will love it to death but make sure you get a spare water line replacement in case of failure down the line because It does not use a standard screw on it uses a push in pipe system, I think it's called PE But definitely don't quote me on that. Needless to say it puts out plenty of pressure as long as it's hooked up properly and tightened properly, Definitely use at least alittle plumbers tape and if you were having an issue where it's still leaking from the toilet I would suggest replacing the inside water stopper entirely with one that has brass threading on the bottom. Because I had a huge leak problem for a while with one of them and I realized it was the PVC threading that was the issue, after I got brass threading for the toilet water connection from the tank it was a entire none issue every again and only cost me like 20 more dollars and a somewhat quick search on Amazon for one that I for sure knew had brass threading on the bottom. Unfortunately the toilet light it has is kind of a meager blue and it doesn't really light up very much, So it's kind of still hard to find in the dark but definitely easier than without it. Also it doesn't have any sort of motion sensor so it's either on or it's not and there's no timer for it either as far as I can tell, Just an old fashioned one and off click with the button. There are some caveats, for one the fan and sprayer are a little far back on the seat itself to the point where it's kind of hard to click the toilet on entirely to the included rail system. If not at all impossible, but despite the fact I haven't heard the click or gotten it on fully it does not seem to move really regardless so that's good. Another slight issue is cabling, I have an extension cable that was able to put up with the voltage no problem even when everything is maxed out. But if you get this and do not have a plug within reach of the fairly short cable you will definitely want to get an extension cable for it and make sure that it's able to withstand a space heaters worth of volts just to be safe. (1500Watts) Don't cheap out on the extension cable and risk burning your house down especially because ones that can handle those voltages are usually only about 4 to $7 more depending on the length you want. I ended up having to call in and get a replacement T valve from them and they went above and beyond sending me an entire secondary accessories kit so that's a great thing to have on hand for me personally later if something goes wrong, It came with another railing in case the one it's currently clicked into ever snaps on either of the ones I own, an extra T valve which is what I actually asked for and now I'm using in replacement of one that was leaking prior and pretty much all of the other things along with a spare One of their proprietary hoses. The person who contacted me was very understanding of the way I had to get in contact with them, I ended up being forced to leave a one-star review explaining the problem temporarily and they messaged me and I happily deleted it immediately after I was able to get in contact with them and get all of that settled. They started this stuff on the way pretty much same day and it took about 4 days to get here. Very forthcoming very understanding and very kind customer service that I would happily give that a 12 out of 10 And I will definitely be getting more of these if I ever move or even if one breaks I'll happily pay for a new one just because the customer service was so flawless I want to encourage more of it. Suffice it to say this device is well worth the money for what it provides alone and a huge bonus is the quality customer service that they give on top of everything. Pros and cons list below Pro's Very easy to install Gets very warm and has several settings for preferences Has a saved profile button to swap between preferences for multiple people Good pressure with water Astounding customer service support in comparison to other companies I've tried. Cons Proprietary T valve for water in the Bidet, may require replacing toilet tank water in thread section (The hose from the wall to the original tank itself) with brass threaded alternative to prevent leaks or stripping. No motion sensing for the toilet light

I bought this item But the voltage is not applicable in Uae And there is not mentioned in the description Before purchase I think they should know & then ship the item!!!

Very easy to install and comes with everything, besides a Phillips screwdriver, you'll need for a successful installation. Took less than 15 minutes to unbox n install. Works great n all the family loves it. It has a nightlight function but the control panel doesn't light up, the bowl does. The adjustments are easy to set. The pressure, temp n aiming are really good. Definitely buying another soon for the other restrooms. We got the elongated seat which really helps comfort n opening size It's bolted to a Costco brand one piece toilet. PS we love travel in Japan n this is like being there in the restroom 😂

Edit after 11 months ownership: the nozzle started with a slow drip, maybe one drip every 5 mins into the toilet bowl, which I didn’t really worry about. Over two months it has progressed into a constant drip and almost a stream of water down into the toilet bowl. I tried to reach out to the company for a warranty claim and the website on the packaging that it was delivered with is no longer existent and I can’t figure out a way to make the warranty claim for a replacement. This is in a house with one person and it gets used only 1-2 times a day, so very light use compared to someone who might be married or have a family. Base on my experience, I’d say you should only expect this bidet to last for 8-12 months before needing to be repaired or replaced and that’s not very high quality or what I’d say most people would expect from this product. I'm four months into owning this and I can confidently say I'll never go back to not using a bidet. This one seems to function well, and it was a great price. I avoid not pooping at home because I can't go back to regular toilet paper. I'll probably buy a nicer one at some point in the future, now that I know what I've been missing out on. Then again if this one keeps going strong, then maybe I'll buy the same one again.

12/23/2023 Update: the water stopped warming and now I'm in a conundrum. The only reason I spent as much is to have warm water. I have not even had it a year, tho the warming did last past 6 months. I honestly don't know what to do. I have enjoyed using it when functioning properly and now I'm just gravely disappointed. Original review: Came with everything it was supposed to, and also what appears to be a roll of tape with a purpose I know not. As a non-plumber person, I found installation pretty easy. Anyway, I read all the reviews and sensed that some of the complaints may not be the fault of the item. The only one I'd like to dispel for you is the issue of the water not working after installation. This happened to me as well, but because everything had been done correctly (and honestly because this was my second bidet attempt this year), I wanted to see if there was something I was missing. I sat on it and read the manual thoroughly, as opposed to just skimming and mimicking the drawings. On one of the last pages it instructs that if the water isn't working, air may be in the tube. So I got a little pail, pulled the tube out of the reservoir for a few seconds (it says 30, but that sure seems long to have water gushing out of anything), and replaced it. Plugged it back in, turned it on and left the bathroom- instead of staring at the blinking light to see if it would stop. When I returned, the light was not blinking and ta-da! It worked exactly as it should. I will say: it does seem like a a few things have adjusted since I first installed a couple weeks ago- the water pressure for the rear has eased a bit, and the water pressure for the lady parts intensified. It's set to high. To a degree it doesn't matter because the lady parts function only worked for that area the first couple times; it now only hits the rear, and the higher power is good for that. I don't know how I can be sitting so drastically different that the lady parts function is ineffective after seeming right initially, but I honestly didn't get a bidet for my front parts. The oscillating feature was also more obvious during the first couple uses, now not as distinct. All in all I like it and have my fingers crossed that in 6mos the water will still get warm!