Husky Liners Wheel Well Rear Guards | Fits 2021-2026 Ford F-150 Raptor Model Only | Rear, 2-pc. Black - 79171

Wow, these fit better than expected and easy to install. Look great too. The instrucitons say to remove the 8 existing screws, but that's not necessary, just back them out halfway and save yourself some time.

Nice enough but be aware this item only fits the F-150 RAPTOR

Do not purchase from this company. If I could give them a -trillion I would. I tried to return there product that seem to me to be defective from the manufacturer. It didn’t fit. They sent me a return label that only included the label not prepaid and told me to pay return cost. Took it ups store $400 was there cost. After multiple emails over 4 days they sent a pre paid return label and still haven’t received my refund. What a joke of a company.

I had to cut a 10 inch notch out of the liners so they would not make contact with the Fox shock reservoirs. Took some patience and some prying to align the factory holes with the liner but it’s definitely doable. A plastic pry tool helped immensely with the install because it’s a bit of a struggle to get them to sit in the wheel well channel properly. It’s a snug fit and they are definitely secure after install. The best parts are that truck looks complete and the rear wheel wells are protected from the elements. The Raptor should come with these installed from the factory. Do better Ford.

Fit great, leaves the shocks exposed like I hoped. Install took maybe 15 minutes, some tips: 1. I only backed the flare screws out halfway, I didn’t remove them. 2. Get the liner in at the bottom corners first, then work your way from the tailgate end first and around towards the front of the vehicle side of the wheel well - goes much easier! 3. Use a plastic trim tool like the one in my picture, saves your fingers and it makes the install a breeze. Only had to drag that tool around the fender and it set everything perfectly and quick versus pinching my fingers and fighting it in between the flare and the body. This way you pull the flare down and the liner slips in perfectly. L With the tool, I did each side in under 5 minutes. Without the tool, still simple but it might take 20-25 minutes of fumbling around with it.

They look was better than an empty rear wheel well on the F-150 Raptor. It was easy to install as long as you get a small PLASTIC prying instrument to run it along the lip. I only needed 2 tools and a couple of bits. 45 minutes to install both sides.

These liners will require a little extra work if you have a little OCD like me. I had to trim both sides to keep them away from the wire that connects to the top of the shock and routes behind them. I also had to trim the driver side above the shock mount to keep it from rubbing. The tool I used to trim them was a razor blade. I then used a Dremel tool with a small sanding wheel to smooth everything up. I installed the two clips first, then loosened the eight bolts halfway as someone else mentioned. The easiest way I found to install them was to start low and roll them over the tire keeping your hands on each outermost side so you don’t scratch your fender flares. Then hook the back over the shock and roll it the rest of the way in. Hook the bottom front and bottom rear behind the flares. Start inserting the lip at the back and keep working towards the front. I just used my fingers to insert them. When you get the lip inserted squeeze the fender flare and the liner together and you will hear and feel it slide in and out. Tighten the two bolts in the back then the eight around the fender flare and you are done. Makes a big difference on the lighter color trucks. I have the avalanche and glad I got them!

Do not purchase if you have 802A package with the dual valve shocks and 37s. They DO NOT fit raptors with those shocks. Only fits the 801a package with normal suspension/35s. Support is garbage and kept saying they can "fit" - sure if you cut and dremel out the plastic but that shouldn't be the case. You are at risk if not done appropriately on having the plastic damage the wiring nearby etc. Don't waste your money.

Perfect fit

Liked

Nice quality inner rear fenders as good as OEM!! AAA+++

Fits 2025 Raptor nice! Trimmed small piece near shock but I might not of needed to either.

Worked great on my 2025 Raptor R