BONTEC Dual Monitor Arm Desk Mount for 13–27 Inch Computer Screens, VESA 75x75/100x100, Full Motion Adjustable Monitor Arm with 360° Rotation, Height Adjustable up to 430mm, Max 10kg per Arm, Black

This product is not perfect but at this price point it is extremely well engineered. It is also supplied with an extensive range of bolts etc. as well as two mounting options which cover most installations. I have set up a few different types of these stands for both 2 and 3 screen set-ups for video editing. The more expensive ones have sophisticated adjustments for lateral and vertical movement. The adjustments on this unit are simply engineered, but they work just fine. Ideally, and perhaps typically, the end user would be mounting an identical pair of monitors. I hadn't really thought this through so when Amazon offered me free, same day delivery (really?!) I jumped in like an eager schoolboy! I set this up to take a big curved Dell monitor on the left and a smaller 24" one on the right. Frankly, I didn't expect this to work but it is perfect, despite the 2:1 size difference is the monitor widths. A little fiddling and cussing, but at this price point I am very pleased indeed. FYI: I raised the entire pedestal by about 1 inch - drilled through the desk - using a couple of round alloy plates and a piece of M10 threaded bar, instead of the substantial supplied bolt. For most, the standard height adjustments may be plenty and I was cutting through a 2" thick desk, necessitating the longer bolt. The bottom line is that if you're reasonably handy, this monitor stand is sturdy, well engineered, well finished (no nasty sharp edges) and entirely recommended.

I bought the monitor arm to replace the single arm I had before, which was wobbly with any movement in the room and made me have to prop up my secondary monitor, risking it slipping. so this was to fix that and hold both together and off my desk. I am very impressed with the quality of the monitor arm as all the parts are metal and feel really sturdy, as well as being strong the paint finish is really clean. I had no defects or chips when mine arrived and I was really impressed that it had a really nice colour to it as I have seen some that look off-white. The set up was really easy as it's an easy fit to any desk and holds both monitors with the regular brackets that just can't be beaten. the size of it is really good as its no bigger than any other arm and it has a low profile adjustment system. The adjustment are really easy to make as each hinge has a screw that can be adjusted with the included allen keys. these hinges move very easy when loose and can then lock into position if you want to remove any allowence for change. the cable management that is included is the perfect size for the four cable that are coming from my monitors while also having enough room for the cable of my light bar and also an extra if needed. the fitting are placed in a big standard place which is very useful as it allows for movement to continue even with some shorter cables. overall very very happy with this arm as it has done everything that I wanted it to do while also eliminating having to much black and my setup dark, by having the clean white option. for the price isn't cheap its 100% worth it as other Dual arms on the market are asking for more and don't even have as good quality, backed up by the reviews on them... Definatly recommend, great for freeing up space and cleaning up the overall look of you set up.

I decided that I wanted to mount my monitors for two reasons - firstly the stands that came with the monitors offered no vertical adjustment And secondly my work desk is quite limited so the idea of freeing up space by getting rid of the stands was appealing. Glad to say to say that both of these requirements were met. The finished look of the stand is pretty standard as can be seen in the images I’ve posted. My monitors didn’t have vesa mount holes (annoyingly) so I had to buy adapters that do ruin the overall aesthetic but that’s no fault of the stand. In terms of putting the stand together,I can’t really complain,Assembly was straightforward and it came with all the required tools,screws and bolts. The build quality is absolutely fine for this price point,no issues there. There are two options for attaching the stand to a desk - a “clamp” and a grommet method. The grommet method is cleaner Looking but unless your desk has a pre drilled hole you will need to drill one yourself,I choose the clamp method. My desk is around 12-13mm thick (Basically not that thick),the clamp...“clamps” fine and feels sturdy enough for my two 24” monitors. The desk may not be thick enough to support larger monitors,I cannot say ,but it is my opinion that it is. In terms of vertical adjustments you can rise and lower both monitors together easily, unfortunately you can’t really adjust the individual heights of each monitor,this can be annoying if your monitors don’t line up perfectly...something to keep in mind. Although you probably could leave the joint that governs vertical movement loose enough so that you could adjust it,I wouldn’t recommend doing so due to the nature of gravity. Find a height that suits you and tighten the joint as tight as you can. You Can however At least adjust the viewing angle of each monitor although once again due to gravity I would find an angle that suits you,tighten as tight as you can and stick to it. In terms of horizontal movement you have a lot of options and Unlike the vertical joints you can leave these loose enough to move as gravity isn’t really an issue here. The stand comes with clips for cable management that can be attached to the arms and central pole. Nothing overly elegant but they do allow you to “hide” display/power cables a little, helps with the clean look. One last thing to keep in mind is how you want to arrange the monitors on the mount,you can have one or two monitors in either portrait or landscape which depending on your preference is nice. I prefer a Landscape “v” shape arrangement,due to my monitor size (24”) I had to have the back of the arms at such a pose that they stuck out a lot further than I thought. The result being that I had to move my desk out from the wall a few inches to facilitate this(see images). So this may be an issue if you can’t move your desk or it’s fixed in position against a wall. Admittedly I’ve only been using the stand for around 3/4 weeks so there is still plenty of time for wear and tear issues to present themselves but overall I’m happy with the purchase and would recommend this stand if you are looking for an affordable dual monitor mount solution.

Putting this together felt a bit like a puzzle—some fiddly bits —but once you crack it, it's perfect. Once assembled, it’s rock solid: think steel‑heavy build, zero wobble, and a reassuring lack of chipped paint. I fitted it through a desk hole, but the bracket included to clamp it looked equally sturdy. Adjusting the monitors? Adjustments are robust, perhaps a tad too rigid if you expect swivel-on-demand, but, when it’s in place, it stays in place. Cable chaos was tamed nicely thanks to the clever cable‑management clips and handy Allen‑key hooks built into the stand. Thoughtful design, I’d say. In summary: Pros: Super sturdy and stable—once it’s up, it stays with no wobbling! Clean, tidy cable routing and tool storage. Great value for the price. Cons: Assembly is a little fiddly. Adjusting positions isn’t as fluid as some higher-end gas‑spring arms. If you don’t mind a bit of effort during setup, you’re rewarded with a dependable companion for your monitors and clearing space on your desk for you to work.

As someone who utilises several monitors for work, I wanted to reclaim desk space, without having to drill a load of holes in the wall for wall-mounting my screens. Enter this monitor stand. I had a couple of concerns. Firstly the top of my desk is a couple of inches thick and I didn't want to drill it, so would the clamping capacity of the mount be enough? Secondly, I was planning on mounting two 27" screens, which although not ridiculously heavy, aren't light either. I should not have worried. Firstly the hardware supplied with the mounting kit is ideal, including everything you need to get up and running and there is also a holder built into the cable management for the allen keys, so once assembled you can keep them handy for adjustments. The clamp fixes the mount to the desk very securely, holding the vertical post very nicely. The horizontal arms then attach very nicely, with plenty of adjustment vertically, so if you're mounting large monitors, you should have lots of space. You can then route the cables along the arms and down the vertical post. Overall, it is an excellent piece of kit. It only really does one thing, but it does it very well. If you have screens that are much larger than 27" you will end up using most of the horizontal travel in the arms, so you won't be able to pull the monitors very far forwards, but if you want to reclaim your desk space and mount your monitors without having to drill holes in anything, this is the way to go.

I got recommended these monitor arms by a friend and he was not wrong. There's 2 ways you can build this but I went with the first method. Once it's all together, it clamps really well to my desk and feels very strong and sturdy. The quality of the whole set is great. Everything feels like its made out of a heavy metallic that is strong. It holds my 2 monitors very well too. It has room to move them around, rotate them side to side etc. Helping create different viewing angles and helps get them in thr right position that you want your monitors in. It holds both very well and dont look at all like its going to break or anything. You can have the monitors float high or low as they are connected to the tube that is clamped to the desk and it can be moved up and down when loosened. That is very helpful especially for my posture as I'm now looking straight ahead instead of down now, when on my computer. Absolutely recommend this dual monitor arm, its easily the best on the market at its price.

This is an amazing dual monitor arm. got it at £26. it's is reliable, adjustable, well balanced. worth it. I have two 27" monitors and I am very pleased with this monitor arm desk mount. top quality at an affordable price. well done Bontec.

I waited to write the review to see how the product comes along a month into use. There are some issues with the screws not fitting property (black plastic headed screws which go into the back of the monitor/ screen). As the screw grooves are not manufactured perfectly the screen does not fit snug, causing one arms screen to be slightly loose. I wonder if the manufacturer will be okay to send replacement screws. For the price, this item is good value, the stand be adjusted quiet a bit and the instructions are decent. Do not expect perfection and you will be fine. Also the bottom of the fitting is quiet big and you must have a decent amount of space at the bottom of the desk to fit this. The item is decently stable and not too heavy.

11インチと15.6インチのディスプレイで使用しています。 13インチ〜と記載されているのでそれより小さいディスプレイでも使えるか内心不安でしたが（モニターアームを買うのはこれが初めて）、当然ながら規格さえ合っていれば使えるので11インチでも問題ありませんでした。 あとモニターが軽いのでアレですが、特にグラつきもなく使えています。 価格が安く取り付けも簡単だったので、非常に満足しています。

Solidny produkt.

Parfait. Utilisé pour 2 écrans 24"panoramique dans laxe de mon bureau (avec un léger angle en V cf. photo) c’est vraiment nickel. je tiens à préciser je ne bouge pas mes écrans et une fois réglés je les bouge vraiment très peu mais les mouvements sont possibles (l'inclinaison verticale est moins simple car dépend du serrage de la vis associée). Pour ma part j'utilise la pince de plateau sur mon bureau et le tout est très solide et aussi très stable. Attention toutefois qu'avec des écrans de 24" et contre un mur (mon cas voir en photo) d'ou le V mais c'est parfait pour une utilisation"bureautique" les 2 écrans ne peuvent pas être à plat soit parallèle au mur, sinon il ne sont pas bord à bord mais c'est dû à la page importante utilisable (27" max). Le montage est assez simple (il faut toutefois y aller avec de la logique et du bon sens) au final tout est dans le kit, rien à redire (tuto internet si besoin de clarif car pas de notice exploitable) Permet de libérer l'espace sous les écrans, le bureau gagne en place et en facilité de nettoyage. Les guides câbles sous suffisants et permettent de guider les câbles d'alim et HDMI de la base aux écrans sans problème.

So much cheaper than other products and was surprised upon arrival how solid this is. A lot of quality for the money

Compré este soporte para dos monitores hace justo un año y quería esperar a cumplir ese tiempo antes de dejar mi valoración. Ahora que lo he usado a diario, puedo decir que ha valido totalmente la pena. Lo que me ha convencido: Desde el primer montaje, el soporte demostró ser robusto. Sujetar dos pantallas (una de 24” y otra de 27”) sin problemas de estabilidad ha sido la norma: cero bamboleos, incluso al mover los monitores de lugar alguna vez. Me gusta que los brazos tengan buena extensión y diferentes ángulos de inclinación y giro, lo que me ha permitido adaptar mejor la posición para trabajar largas horas en programación, revisión de código y reuniones online. La ergonomía ha sido clave. Podía ajustar la altura a mi nivel, lo que redujo notablemente la tensión en cuello y hombros comparado con mi antigua configuración. El sistema de abrazadera “en C” funciona bien en mi escritorio de 80 cm de profundidad y un grosor estándar, y mantiene todo firme sin moverme nada. Transcurrido un año de uso… Sigue igual de firme que el día que lo instalé. Ninguna articulación flojea, los tornillos no se han aflojado, y el cableado oculto sigue limpio. El producto sigue cumpliendo sin tener que reajustar ni apretar nada. Algo a tener en cuenta: Dependiendo del grosor del escritorio y de los montajes previos, hay que asegurarse de que la abrazadera encaje y esté bien fijada. En mi caso tuve que cambiar el escritorio para maximizar estabilidad (por el grosor no existia soporte en el mercado y ya lo tenia contemplado). Además, si tus monitores son mucho más grandes o pesados de lo que indica la especificación (13-27” / hasta 10 kg por brazo según ficha) quizá sería mejor un brazo diseñado para cargas mayores. Conclusión: Si buscas un soporte doble para monitor, sólido, ajustable y que resista un uso diario intenso por más de un año sin fallos, este modelo cumple y de sobra. Le doy 5 estrellas sin dudarlo, y lo recomiendo para entornos de programación, trabajo en oficina en casa o multitarea con dos pantallas.