ASUS Intel LGA1151 H110 Chipset I-Plus Mini-ITX Motherboard

Perfect motherboard for my small case and was simple/easy to install with my new CPU and RAM, 5 stars!

As always, a high quality product by ASUS. I ordered this to go in a Cooler Master Elite 110 case and it fit perfect. It was well packaged but I didn't think much of the 2 SATA cables that came with it (one was a right angle connector and the other straight). I should have known better and ordered them separately. Overall, I am pleased and I will use ASUS again for my next motherboard.

I've used the board with a 7th gen Intel Pentium G4560 chip. I'm happy to report firmware revision was high enough to accept the Pentium chip without the need to firmware using an older chip first (If it wasn't the machine wouldn't past its POST). The driver support from Asus has been first rate and the new machine built really easily. The only downside is the lack of M2/Msata ports. A basic but decent mini-ITX board.

No issues at all, compatible with all my other new parts as expected and installation was relatively easy, although slightly fiddly as it was a micro build. Great Mobo for the price :)

First motherboard arrived and would not POST. Replacement motherboard took a while to arrive from France and it would POST but only if one of the RAM slots was empty (the RAM slot was faulty). Both returned for a refund used the MSI Intel Lga1151 H110I Pro instead and that worked perfectly first time.

Same pieces, same hard drive, same SSD, same processor, sane GTX 1060, yet in WItcher 3 somehow with absoutely nothing changed in the graphics and postprocessing tab I've gone from averaging between 30 to 40fps to 55 to 60fps. How? No idea. Mobo before this ASUS H110i was the MSI H110i Pro. It died on me after two weeks of use, so I decided to drop the UltraM.2 port that i won't ever use (nvme are too expensive) and jumped ship to ASUS instead of asking for a replacement. That was the one and ONLY change.

Works fine

H110-iPlus: It's running nicely and everything works. If you install it in a Minibox M350, with a 40x10 case fan, it is placed so the air blows at the pico-psu, which I think is the weakest link in the power supply, so that stays cool. USB2 header near back, front panel connector just reaches. My disappointment is with the built-in network socket. It's flaky in both Windows 7 and Linux. It had me tearing my hair out at times. A linux solution is to use the r8168 driver instead of the r8169, sounds easy enough, but it's not. No idea what to do in Windows 7. Fortunately, the Raksoy Ralink 5370 USB nano-receiver, works really well so far in both Windows and Linux, and it's only a fiver.

Buena placa,se ve que es de calidad. BIOS muy cómoda y rendimiento adecuado. Recomendada.

Ich habe nach einer Vorgabe im Netz einen kleinen Schneller Bürorechner zusammengebaut. Performance ist sehr gut. Alle Treiber werden von Windows 10 automatisch installiert. Alle Komponenten gibt es hier bei Amazon, zusammen unter 500€ Meine Konfiguration: RAM: 2x Crucial 8GB Einzel DDR4 2133 MT/s (PC4-17000) DIMM 288-Pin Speicher - CT8G4DFS8213 SSD: SanDisk SSD PLUS 240GB Sata III 2,5 Zoll Interne SSD Gehäuse: Sharkoon Shark Zone C10 PC-Gehäuse (Mini-ITX, 1x 5,25 extern, 1x 2,5 Zoll/3,5 Zoll intern, 2x USB 3.0) Prozessor: Intel BX80662I36100 Prozessor Mainboard: Asus H110I-Plus Mainboard Sockel 1151 (Mini-ITX, Intel H110, 2x DDR4 Speicher, 4x SATA 6Gb/s, 2x USB 3.0, 4x USB 2.0, PCIe 3.0) Netzteil: XILENCE Performance C Serie XN041 PC Netzteil (XP400R6) USB-Platte Datensicherung: Verbatim GT SuperSpeed externe Festplatte 1TB (6,4 cm (2,5 Zoll), 5400rpm, 8MB Cache, USB 3.0)

Me preocupaba que no le quedara a mi computadora, pero esta funcionando muy bien, espero que dure mucho.

I've been using this motherboard for 8 months now and it has been great. It works well with i7-6700k and GTX 1080 just fine. Extremely easy to install and use as well.

it's working perfectly