Hycote Fast Drying Aerosol Car Spray Paint, Gloss Black, 400 ml

Good coverage decent fan of paint better than some expensive ones

Used this paint to do the inside of the headlight pods of my clasic lotus. Really good coverage almost no runs. It touch dried really quickly and i did the spraying outside. Easy to apply excellent value for money and they look really good .

Did the job

I used this paint to repair some light rash on my glossy black alloy rims (Romac brand). You will need a primer to go with this as this paint is just for colour. The result was a perfect match to my wheels, can hardly tell the rash was there to begin with and I did x2 coats. Start to finish took me an hour so well worth it for the price! Even coverage and easy to use, I recommend 5*

As advertised and arrived on time

HYCOTE GLOSS BLACK, 400ml I had upgraded a piece of equipment on my work bench which incorporated some black frames. After attaching to my bench, I found that the washers fixing my press to the bench were embedding into the wood. I decided to buy some steel plate to fix to the top and underside of my bench to spread some of the pressure out. I wanted to spray the steel black so that it would match the black frames which I had already purchased. The spraying is quite straight forward, shake the can up for a couple of minutes to ensure the contents have mixed, then spray on your project. it's worth pointing out that PREPARATION IS KEY when spray painting! Make sure you thoroughly degrease your project before painting and make sure you have a nice, smooth surface finish if possible. I decided to use methylated spirits to degrease my project which worked well. Make sure to apply THIN coats and build up. Allow 15 minutes drying time between each coat. After the final coat is applied, allow it to dry for 24 hours to fully cure and harden. I have attached a couple of pictures. The first plate I sprayed is shown on the right, and the second plate is on the left. The finish was not amazing on the first plate but this is due to surface preparation and not the paint. I tried to polish the sheet using a fine silicon carbide grit paper, the surface looked and felt smooth but didn't help produce a good coating. I also applied the coating too thick and each layer was slightly contaminated in the area I was spray painting due to the wind, as is shown by the speckly appearance. On the second plate, I applied a thinner coat (1 pass with the spray can at a time) and did this in my shed to avoid the wind from blowing airborne particles onto it. You can see that the finish is much nicer and it is quite smooth. This is the finish I was expecting. I ended up using the badly finished sheet underneath the bench, out of sight, and the nicer piece I placed on the top. The finish matches the previously purchase frame very well and from a distance you can't really see any surface imperfections. I would definitely use this paint again for future projects! Remember that preparation is paramount.

What can you say really, the paint comes out when you press the top!? Used it on several items already and it worked well, the paint adhered OK with a nice gloss black finish. I would buy again……once I've finished these cans off!!

One can was O.K The other can had a faulty valve and would spray!!!!

Hält was es verspricht , Deckt wunderbar

Je l'ai utilisée pour repeindre une pièce plastique de ma moto, et cette bombe de peinture est vraiment parfaite. Facile à appliquer, bonne qualité et rendu impeccable. Je recommande !

Muy bien, pinta y seca bien

conforme

Todo correcto ++++