Tubeless Tyre Repair Kits and Sealant for Bikes

Arrived promptly, next day meaning my scooter only out of use for about a day. Super easy to use, see YT videos for instructions if unsure. Didnt even need to remove the wheel, took about 10 mins at most and, up to now, seems to be a sturdy fix, used the scooter for a bit after repairing the hole, seems to be 100% fine. Well happy, buy it!!!

Work brilliantly.

So used in anger after buying this a year ago, got a nail in the rear tyre of my motorbike. Really easy to use, just needed a pair of plyers to get the screw out of the tyre. Used the kit as the instructions said. Took about 5 minutes and sorted. Pumped the tyre up, all good. I was at home when I used this and due to work had to leave the bike 2/3 days before I rode it down to the mechanic to get a proper repair done. Held the tyre pressure for the 2/3 days, it lost about 8 psi. So this is only a temporary repair kit, it says its good for 50/100 miles to get you to a garage ect. Definitely will get you there, works really well, just take it easy riding while it's in, slow and steady and you'll be fine. Got about 5 the hole filler things left. Glad I had it, would buy again when I need anther pack. Obviously it all depends on where the puncture is on the tyre and how big the whole is, but it was perfect for my puncture by a screw.

Excellent

I have been very impressed with this repair kit. No removing the wheel and it works straight away. I have repaired a number of punctures on my tubeless tyres and have done well over 250 miles with no issue. With one hole - caused by a flint- I had to insert 2 “repair sticks” side by side and it is still solid 5 months later. The only issue is trying to get the “repair stick” in the narrow eye of the applicator. I’d have thought the eye could have made slightly larger. I ended shaving the end with the blade to made it easier to push it through and then used a small pair of pliers to grip and pull it all the way. I would recommend a small pair of pliers if not already part of your emergency repair kit

First time I've used one of these and I'm pleasantly surprised at how easy it was to use, and how well it's held for the past month- It holds air like it's not even there! You could easily do this by the roadside and be on your way again in under ten minutes. Would definitely buy again

I've used the larger version of these on car tyres, sveral times, but car tyres are much stronger so it's easier to work the tools into the tyre, and also the 'snot rope'. I struggled to get the 'snot rope' into the prepared hole. And when I did, as I was re-inflating the tyre, as it nearly got to pressure it spat the 'snot rope' out!? Instead, I removed the tyre (eMTB) and did a repair to the tyre. I will give these another try but so far they were a fail. I think the problem with modern bike tyres is that they're so thin. Mine are like paper thin so there's nothing for the 'snot rope' to get wedged in.

I was going to ask a technician to pick my scooter up and fix the puncture, then I decided to give this tool a try and it worked very simple to use DIY

Crevaison de pneu tubeless de moins d'1 mm: le préventif suffit en général. De plus de 3-4mm il faut changer le pneu... Mais entre 1 et 3 ? soit une rustine par l'intérieur du pneu : on s'en met plein les doigts, et la rustine a souvent du mal à tenir soit une mêche par l'extérieur comme pour les pneus de motos ou de voiture. On repère le trou, et on sort le kit de sa poche. Tout est dedans ! Un petit coup de lime ronde pour l'agrandir un peu et on y fourre ensuite la mêche préalablement encollée au cyanoacrylate à l'aide de l'outil en forme de petite fourche. Ca prend très vite et ça marche très bien! Moins de 10 euros pour le kit avec 5 mêches ( qu'on peut d'ailleurs couper en 2 ce qui fait 10 réparations possibles). Super !

Cumple con lo que venden, ningún problema de recepción. Esperemos no tener que usarlo en ruta ningún día. Buen producto

C'est le genre d'outils qu'il est préférable d'avoir sous la main lorsqu'on fait du vélo. Les clés fournies permettent de resserrer l'essentiel des composants. Pensez à commander en même temps un tube de colle pour rustines, parce que le kit n'en contient pas, d'où l'étoile en moins.

Utiliser sur roue de 10 pouces de trottinette en tubeless. Nickel! Aucune perte de pression ou autre.

Un kit complet qui contient tout ce qu'il faut pour réparer une crevaison sur pneu tubeless, à savoir: mèches de différentes tailles, un cutter, une solution vulcanisante, une lime, un outil pour insérer la mèche et un marqueur. Bref excellent à avoir sur soi en sortie vélo.