Cressi Premium anti-fog for diving goggles

Game changer for goggles! I used this after using the arena one for years, as I was getting annoyed with the fogging. This stuff if applied correctly as per instructions works perfectly. No fogging, even in cold sea water, or a hot pool. Highly recommended,

Anti-Fog just isn't what it used to be anymore, however this product has managed to minimise some of the pain caused by misty goggles. I spray the anti fog before every swim and dip it once before putting the goggles on. The reason I do it every time, is that although it works. I don't think it stays effective over multiple swims. However I do clean my goggles regularly too as I swim both outdoors and in the pool, and want to keep the longevity of my goggles so I probably wash the coating off every time I wash them anyway. And because of requiring to do long distance outdoor swims, I can't run the risk of them fogging up after an hour and then needing to stop every 5 mins to wipe it away. Once you spray them, it looks like bubbles form, just wipe the solution around the goggles with your finger and leave to dry. Once dry, rinse once, do not put your finger back on the lenses as you run the risk of wiping off the anti fog coating. If like me you've accidently got it on the rubber eye part, just clean the solution off this area so your goggles still get a good seal. I have used this for long swims (12 hours) and once the solution is applied the anti fog does last the whole swim.

In 20 years of regular swimming I'd never found good anti-fog goggles or a de-misting spray that really worked, but this is excellent. I swim mostly under water, so it's a real boon to find a spray that can cope with this treatment without the need for frequent reapplication. It's easy to apply, doesn't smell or leave any residue, and works for well over an hour. I swim an hour once a week, and the anti-fog lasts until about 15 minutes into the next week's session, so I just respray it before each session, rather than wait for it to wear off. I don't know if it would last several sessions if I swim every day - is it the time since application that matters, or the time spent in the water? But who cares? All that matters is a couple of squirts of this means I can swim happily for over an hour. ----------------------------------------------------------------------------------------------------------- Update Jan 2014: Having lost my anti-fog spray, I checked back through my Amazon orders to reorder, only to discover, that not only is it now significantly dearer, but the postage is now MORE than the product! What appears to cost £5.20, actually sets you back £11.21! (Free delivery only on orders over £10.) Needless to say, I didn't reorder from Amazon. I put the product name into Google and the 4th site I checked out (Wetsuit Outlet) not only charged less for the spray (£5), but the postage was free. So - less than half price compared to Amazon. I was tempted to knock off some stars for this, but it's not the product's fault, so it stays at 5.

When my wife insisted that I get this Antifog Spray for her snorkel gear I bought it through Amazon it was sold at a cost of £5.20 as a Prime item. Prime items are sold with promised next day delivery for prime members. (I am such a member) I selected next day delivery, the next day delivery promise failed. You cannot rely on the next day delivery promise. There is no reference to any potential additional charge that may be applied to non amazon prime members. This item was delivered a day late. It was contained in a hard plastic display wrap. I was scuba dive training and used this spray just a couple of days ago and used this spray for the first time. Initially, the spray appeared to work, less than twenty minutes later even within a shallow swimming pool environment the mask started to steam. The spray capability is closer to a squirt as opposed to spray. It would be much better if it "misted" when the plunger is depressed. Overall, I personally am not overly impressed, the wife has not yet had a chance to test the spray. I will continue to use a smear of inexpensive washing up liquid.

Love this stuff, works very well. I used this for the first time recently and would never head into the water again without it on my mask. Snorkelled extensively for 2 weeks in the Mediterranean and didn't have one single issue with fogging. Goes a long way too. I used for 2 weeks on 2 different masks and when we came home I reckon we'll get another holiday out of the same bottle. If you use it right, this will do the job. The is process that worked for me... 1. Take your mask out and clean off any residue from sun tan lotion or dirty fingers with a dry towel or cloth so your lens is clean and smudge free. 2. Rinse in the water, one quick dip will do. 3. Shake off the excess so its still wet but not full of water. 4. 2 or 3 sprays inside your mask on the lens (obviously!). 5. Swish around the residue to make sure the lens is totally covered then leave it aside for a couple minutes and let it sit on the lens. 6. Dip in water for a very quick rinse, literally in and straight out. You don't want to rinse it all off. 7. Mask on and away. On this trip I taught my 10 year old son to snorkel and expected his mask to fog like a sauna window given he's never breathed through only his mouth before. Used this on his mask too, didn't fog once. Happy days!

I bought this antifog spray to use for my Samsung Gear VR headset. I found that when I put the headset both lenses would mist over and not go away. If this was going to happen during summer, when the temperature difference is minimal, it was only going to get worse over the colder months. I decided to test the efficacy of this product, so I went ahead and put the headset on with no treatment. Before the front menu in Occulus loaded the lenses had already misted up. I removed the headset and wiped the lenses using a microfiber cloth, then put the headset back on. Lo and behold, they misted up again. I then sprayed the Cressi Antifog spray onto the lense, one squirt each, and gently cleaned the lense surface using a microfibre cloth. There were some smears on the lense, but if you wait for 30 seconds this will evaporate off leaving a streak-free finish. I donned the headset and voila, no misting! I managed to play a game for 30mins - 45mins before I decided to take a break, and still no misting up! I noticed that my forehead was a little sweaty and the lenses were still crystal clear. On the next day, I did find that the lenses would mist up so you need to re-apply this spray. With one squirt in each lense, this bottle should last a long time. All in all, I am very impressed with this product!

Worked Well with the little amount that was left in the Bottle after it had been delivered. (It was less than 1/3rd Full), but as we were going on Holiday we didn't have time to return it for a refund or purchase another Bottle. So the 1* Rating is for the 'leaky' Bottle.

I wear prescription goggles for swimming and get really fed up of them fogging up. This spray is brilliant. All you do is spray it on the goggles, leave it for a few minutes and then rinse it off with tap water. Once you put the goggles on they don’t fog up. Although be warned, if you get the inside of the goggles wet with chlorinated water they will immediately fog up as usual! So as long as you keep them on your face you are good to go!

Good to apply before mask usage

Realmente no confiaba demasiado en que este producto fuese a funcionar tan bien, leí las buenas opiniones antes de comprarlo y por el precio que tiene me animé a comprarlo, además conocía la marca Cressi como referente en productos para buceo lo cual me dio confianza adicional. Antes de nada, voy a hablar sobre el embalaje de plástico donde viene el spray, me parece un error el blister de plastico transparente donde viene el producto, es imprescindible usar unas tijeras para abrirlo, ya que con las manos es prácticamente imposible y los bordes incluso pueden hacer daño en las manos al intentarlo, creo que es un punto que el fabricante debería mejorar mucho (nada que ver con Amazon). Con respecto al funcionamiento del producto una vez abierto: Lo uso para las gafas de natación y lo que hago es que aplico un toque de spray en cada una de las lentes por dentro, yo lo hago en el vestuario antes de salir y lo dejo un rato moviendo un poco para que se distribuya bien por la lente (sin usar los dedos) cuando salgo a la piscina lo aclaro en la ducha antes de entrar, luego me ajusto bien las gafas y realmente se nota que no se empañan nada, aguantas nadando mucho mas tiempo si tener que estar limpiando las lentes cada 2 por 3. Temas importantes a tener en cuenta: 1. No recomiendo el contacto directo de este producto con los ojos, por eso recomiendo aclarar bien las gafas con agua (no usar los dedos para mantener la efectividad del producto), yo lo he usado varias veces y no noto nada en los ojos, ni picor ni nada, y llevo lentillas, pero en el bote pone "no ingerir" y "mantengase fuera del alcance de los niños" por eso tomo esta precaucion. 2. No quitarse las gafas durante el entrenamiento: el primer dia que usé este producto, durante los descansos nadando me quité las gafas después de un rato de estar nadando y cuando me las volví a poner empezaron a empañarse de nuevo, en cambio en las sesiones que no me quito las gafas en todo el tiempo la efectividad del producto es total y no se empaña nada durante la sesión. Resumiendo, recomiendo el producto porque te facilita el entrenamiento y se ve todo nítido bajo el agua.

Ciao a tutti gli amanti del nuoto! 👋 Se anche voi siete stanchi di dover interrompere ogni vasca per pulire i vostri occhialini appannati, allora ascoltate qui! Voglio parlarvi dello spray (o gel) antiappannante Cressi Premium Anti Fog. Visibilità CHIARA come il cristallo! Con questo spray, le lenti dei miei occhialini rimangono trasparenti per tutta la sessione di nuoto. Niente più interruzioni fastidiose per asciugare, posso concentrarmi solo sull'allenamento e sul godermi la nuotata! Facilità d'uso da 10 e lode: 1) Lenti asciutte e pulite: Assicurati che le lenti degli occhialini siano completamente asciutte prima dell'applicazione. Se sono bagnate, l'antiappannante non aderirà bene. È anche importante che siano pulite da eventuali residui di cloro, sporco o grasso (ditate). Se necessario, puoi lavarle delicatamente con acqua tiepida e sapone neutro, e poi asciugarle perfettamente. 2) Applicazione interna: Applica l'antiappannante solo sulla parte interna delle lenti, ovvero la parte che sarà a contatto con il tuo viso. È lì che si forma la condensa. 3) ascia asciugare l'antiappannante naturalmente all'aria per qualche minuto (di solito bastano pochi minuti, controlla le istruzioni specifiche del prodotto). Evita di strofinare o asciugare con un panno! Questo potrebbe rimuovere l'antiappannante o creare aloni. 4) Non risciacquare: Una volta asciutto, non risciacquare le lenti! L'antiappannante crea una pellicola protettiva che impedisce la condensa. Risciacquando, la rimuoveresti. Cressi: una garanzia per chi nuota: Sappiamo tutti che Cressi è un marchio leader per attrezzature da nuoto e sub. Questo antiappannante conferma la qualità del brand. Mi sono fidato e ho fatto bene!

Very good tried on my swimming googles, absolutely no fog was in water for 2 hours. Hopefully will work on my scuba mask as well.

The packaging was broken in several places when arrived. Probably very bad manipulation when packing or after. In the first use my diving mask improved, but not as expected. I have to try it once more before say something useful. Fortunately I still have confidence in Cressi