- Crystal Clear Epoxy Resin 1 Gallon - Food Safe, UV Resistant, Bubble Free | Casting & coating epoxy resin for jewelry, coasters, molds, art, wood & more. Bubble-free, low odor, USA based business

Easy to use. Beautiful results! Thanks for such a good product!

I do epoxy resin craft work nearly every day. I'm an addict in recovery, and my sober hobby is crafting for local charities...which is my new addiction, and this product really contributes to my appreciation! This is my go to brand. I simply run the bottles under hot water before I mix the resin and hardener and that eliminates almost all bubbles that are problematic with other brands. No torch or blow dryer needed. This resin sets incredibly clear, is easy to mix, has no odor, and is priced well for the quality. It's also consistent from order to order... I recently ordered my 5th or 6ty gallon set. I will continue ordering this stuff by the vat (almost literally) at this price. I can't say enough good stuff about it. The curing time is a bit longer than some other brands and I always wait a full 24 hours after molding my pieces, but totally worth the wait.

I have purchased about 10 batches of the epoxy and hardener for various projects. I have completed a 10 foot river table and table top, I have made several cheese boards, I have made several planters , and I have used it as a glue for various wood joinery projects and it has worked out very well for me. The first time I used it there was a bit of a learning curve but that was because I had not used this product before. Every epoxy and hardener has it's own "set of rules" and although for the most part they are not that different it is important to read through the instructions. Epoxy is get to use but you really do need to follow the instructions...it needs to be at least 70 degree's but it also needs to not be too hot either. The surface must be totally clean, you need to mix the epoxy and hardener properly but at the same time, not over mix it. You need to most likey have it inside somewhere so that there is not dust or wind that gets into the mold. You need to have a heat gun to get rid of the bubbles. When I first started using this I had a lot of questions and contacted customer service and they always responded to be with a lot of helpful information. Quite frankly without their help I probably could have finished the river table. I could go on and on but long story short, this is a great product, the customer service is excellent, and you really do need to read the directions and follow them. I would also encourage you to do a small test batch on something you don't care about before starting your actual product so you can get an idea for how to use this product.

I run an Etsy shop making resin coasters and vanity trays. This is my go-to resin! In my opinion, it’s the highest quality. Make sure you have a small kitchen torch on hand to help with the bubbles once you pour it. It’s also very important that you warm up the resin and hardener separately in hot water for a couple minutes before you mix them together. You must stir for at least 2 to 3 minutes. Before you pour it on anything, it should be clear as water, save for the bubbles. If there are any streaks in it, keep stirring! Scrape the bottoms and sides of cup, as you’re stirring, as well. This resin will cure very clear and will be hard as nails after 3 days. It’s important not to put anything heavy or ship any creations you make before the resin has fully cured. It may be hard to the touch after 24 hours, but trust me, it’s not fully set yet. Please allow 72 hours to trust the chemical reaction is complete!

This is one of the best epoxies I have ever used, it cures fast and there was very little bubble, which with the help of heat gun they all gone easily and quickly. The outcome is great, it is clear and. My only complain is its price, I would have give it 5 star if it was cheaper. This is expensive enough that make is impossible for me to use it again for tables.

I just started working with resin about 6 weeks ago and I'm completely hooked. This is the first (and so far the only) brand of resin I've worked with and so far I'm quite happy with it. I've only purchased the gallon size (just purchased my second gallon set) since it's a far better value than the smaller sizes. I knew I'd go through it pretty quickly because I'm still learning and making lots of fun mistakes. I haven't noticed any yellowing, although most of my pieces have a good amount of color in them. Bubbles are definitely an issue, as with any resin, but heating the epoxy (the really gooey stuff) by placing your resin cup in another cup of hot water for 10 minutes prior to mixing will help with some of the more stubborn bubbles. The hardener is really thin and bubbles are able to escape much easier. Once mixed, you half about a good half hour working time, at which point the resin will start getting thick and won't pour/mix as easily. Pour in thin layers, hit lightly with a heat gun, and pour more layers. Fish out any bubbles along the edges of the mold with a toothpick. This stuff takes a full 24 hours to cure, and maybe even 48 hours for thinner pieces. The (2) half gallon bottles come packaged very thoroughly to ensure no leaks! I was very impressed with that, as we've all received a bottle of something from Amazon that was missing half its contents. This time around, I decided to also purchase some pumps dispensers (GETi Beauty SalonTop Gallon size) to assist with getting the resin from the bottle to the measuring cups. If you decide to go that route, be sure to place your hardener (the really smelly stuff) in a well ventilated area, since it will essentially be "open" at all times due to the nature of the pump. All in all, the price is fair, it's good quality resin, not as smelly as the stuff my friend uses, and nice working time. Buy it. You won't regret it.

Very easy to use. I like how they kept it simple with a 1:1 mix ratio. It takes pigments (I’ve used acrylic paint, glow powder, and pearl pigment powder) very well. Haven’t had any huge issues with bubbles in the molds I’m using, especially considering they are slightly over the 6oz recommended amount for casting molds for a single pour. It cures very strong and fairly quickly for molds which is a huge bonus. Will be applying this to a flat piece soon to test out the flood coat capabilities, but I’m not expecting it to disappoint. Thanks for the great product. Will be ordering another kit soon

I've ordered from this brand for years and have never received aged resin like this before. It's purple and yellow and hasn't been opened yet. I needed this for my shops projects and won't be able to complete my orders on time due to this.