SUPCO GIDDS-461354 Zoom Spout Turbine Oil

The condenser fan motor was making an intermittent squalling noise. Thought compressor at first, old unit. Would start noise at about 92f degrees. Then started at lower temps as the summer went into fall.Found reference to this product in a search and then found on Amazon.I decided to try it out, what to loose. Pulled motor and fed lube down the shaft to the inside of the motor. Let set for a while then did again. I did this three times, reinstalled motor and waited for a hot day. One came along and used the air. No noise, but not very hot either. Now that the hot season is returning the air has run quite a bit. The temp hasn't reached 90+, but the there has been no noise.Hoping this will save me having to buy a new motor, for a while anyway.Shipping and packaging was fine.Will update if I can when temp gets high again.Update:7-16-20 Had quite a few hot days (100+) and I have had to oil this motor twice more. In the fall I had to lube lower again. Then this summer lower bearing was not making noise but upper one was. I oiled the lower one since I was there and drilled a whole in the top of the motor to get to the upper bearing. Didn't think this would work, but there has been no noise since. This is an old unit and I don't want to spend a couple hundred dollars replacing the motor when the compressor could go out at any time.I have also used this oil on door hinges and my hair clippers with much success.Update: 10-7-21Still using this oil for my hvac condenser fan, had to drill a hole in the top for the upper bearing.One to two lubes a year and no noise. However, mild summer this year.

The Oil is excellent. But the container is the answer to frozen water dispensers in GE Refrigerators. Drain the oil into a suitable container and then clean the container thoroughly. The next time your GE Fridge refuses to dispense water from the in-the-door system, fill the Zoom Spout container with very hot water and insert the extendable spout into the water outlet in the Fridge door. Squeeze the container carefully, while extending the spout until the frozen water in the door melts and, when activated, filtered water once again flows. It works! The freeze-up problem is due to a couple of things: Mostly, because the insolation in the freezer door becomes less efficient over time and secondly, too many frozen products are stored in the door of the freezer. This is the best $9.00 I have ever spent. GE Service calls for this simple problem are too much. Hope this helps.

The media could not be loaded.  I love this stuff. It took me about 10 years to use a whole bottle but I finally did it. Definitely one of those products where a little goes a long way.Pros:1. Very versatile. I have used this on roller bearings, printer carriage rails, fan motors, heater blowers, locks, hinges and just about any other appliance you can think of with moving parts.2. The zoom spout telescoping tip works great for places that you just cannot fit the entire bottle by.3. Does not gum up over time.4. Withstands high heat temps without breaking down. Viscosity: 92-99 @ 140°FCons:1. Cannot for the life of me find this in any stores any more except online.

I use this high quality turbine oil to lubricate electric motors throughout the house. The zoom spout makes it easy to reach the oiling ports on the blower motor in my furnace without having to remove the motor. The oil is long lasting and does not gum up bearing over time. I have been using this stuff for over 30 years and an "old timer" introduced me to the stuff back in the day.

Great price on a quality oil. Works fantastic in my 5 Hunter fans that have an oil reservoir, I was going broke buying their brand oil.Update 11/20/19: This stuff is incredible, since my last review I took down my 28 year old Hunter fan to drain and refill. There was no gumming and minimal loss. It's a 60" fan and stays on 24/7 circulating air in a 2 story atrium. I started using it in all my old woodworking ported motors about 5 years ago and it performs just as well in them.

Between the extendable spout, with a cap to prevent spills, and the convenience of the easily portable bottle, this turbine oil is a great product for maintaining electric motors, or anything else that requires turbine oil.

Nice way to oil hard to reach spots and no over spray to clean off. Supper slippery oil,the best

Since Holden company closed up shop I have been hoping to find a replacement product. The only thing I find wrong with this product is it's clear liquid. If you have poor eye site it is hard to tell if your putting too much oil on your target are not enough. Wished it had a color to it.