Uinkit 30 Sheets Pintable Transparency Film Acetate Clear Sheets for Crafts 8.5x11 OHP Overhead Projector Film For Inkjet Printer Quick-Dry

I have tried a couple of brands and this is by far my favorite brand. It is easy to see which side goes into my printer to make sure that I get a perfect print every time. For me I put the rounded corner to the bottom right side when feeding it into my Epson eco tank printer. The other brands I tried were impossible to figure out which side to print on. This brand dries super fast and once it is dry it is not going to smear. It is so easy to use and at a very affordable price.

Important note: a lot of people in these reviews complaining about ink smearing are printing on the wrong side of the transparency sheet. The instructions tell you that the notched corner should go in the bottom right for printing - this is NOT accurate for all printers. My printer prints on the opposite side of the printer paper, so I ended up having to load them upside down to print on the correct/sticky side. To find out what side your printer prints on, I’d recommend making a mark on a test piece of printer paper and running it through to see which side the mark comes out on. If you’re using the sticky side, the ink dries quickly and the edges are very clean. These are a great value per sheet. My logo printed accurately and was clear on a textured wall even when blown up to several times its size. I bought these transparency sheets to make a DIY projector for tracing a felt flag with a cardboard box and my phone’s flashlight. These worked like a CHARM. For $7 and some felt, I created a flag that was upwards of $100 to custom order. (DIY projector, flag in progress, and finished flag photos attached.)

Printed nice. Images came out clear and detailed. Please allow ink to dry. If your printer prints images and they come out facing upwards, please make sure the curved corner edge is on the upper left hand side when loading this paper. This is the back side which the ink will adhere to. Please allow ink to dry.

Excellent purchase. Works great. My Inner child is happy 😊

Edited update - With some instructions from the seller I was able to get this to print with my HP 2800e All-in-one printer! Quality is good, but some more explicit instructions on the packaging to change the paper setting on the printer would have been helpful. I couldn't find a setting for transparency film but was able to get it to print properly with a gloss setting.

I rarely write reviews for products I’ve purchased, but I felt compelled to speak on this one. I used my Epson ET-2803 to print transparent “stained glass” images. Each printed beautifully. I initially followed the instructions given by the manufacturer, and ended up with blobs of ink everywhere. After flipping the film over to the opposite side, I ended up with beautiful prints.

Thankfully there’s a sticker on the packaging saying which side is the printable side, it printed well, my printer didn’t mind it, I wasn’t sure if it would pull it through since it can be temperamental with non-standard paper types. Seemed to dry quickly, and didn’t smudge. Either wear gloves or be very careful handling it to avoid finger oils on the film.

These are perfect for my use. I'm an artist who makes translucent suncatchers and bookmarks. I'm printing on two different printers, one with pigment and one with dye inks with no issues. My print setting is to the highest gloss and best print quality. I'm printing with Epson printers ET-8550 and ST-C8000 with no issues whatsoever. The colors are bright and beautiful! No smearing. After drying for about 1 hour I put the transparency in 3 mil laminating pouches and laminate at the 3 mil setting without any degradation to the transparency or any warping. I had a hard time finding info about this method so I thought others might like to know here.

Good

Good stuff, clean and clear. Bought this for window glazing on scale models, intending to cut things out with a Cricut Joy machine - cuts very cleanly on the Cricut! Sheets are 8.5-inches by 11-inches, with a rounded corner on one corner. What I bought will last a long time for model building work, but would certainly buy again.

Good product!!!!! Quality is top!!! For a good price.

It met my needs and printed great on my ink jet printer.

Once I figured out how to get it to work, it turned out pretty well. I use an Epson ET-2850, which doesn't recognize transparencies, and needs a specific paper setting. 1. Tape the transparency to a piece of white paper. 2. Print on Premium Matte setting, both on computer and printer. You can see the bottom row of wings that just looked purple, because glossy photo settings don't use black.