AIO Robotics Blue PLA 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, 1.0 kg Spool

****UPDATE 6/19/18****Although this seemed like a great purchase at the time, I have since nearly reached the end of the roll. After using about 75% of the plastic on the roll, my prints started to fail for some reason, leaving me with just a few layers on the bottom of my print bed. I checked my extruder, and every time a print failed, the filament had broken apart from the extruder feed. Upon closer inspection of the filament, I found that the last 25% or so of the roll has been "kinked", or bent too far (in random places), resulting in it becoming so fragile that it can't be printed with. I assume that this happened when the filament was wound on the roll, where it is required to bend at a tighter angle to fit, but I've personally never had this issue with a roll of filament, ABS or PLA, from any other manufacturer I've tried in the past. I'm still going to get another roll to see if it was a possible 1-time manufacturing error, so I'll update this review again when and if it's necessary.****Original Review****Initial Impressions, 2/3/18:I just started printing my first layer with this roll. It bonded very well with my print bed (unheated - I've found my print bed works worse when heated with PLA). The first thing I noticed is that this color is EXACTLY the same shade of blue as blue painter's tape, which I use on my print bed for every print. At first, I thought it wasn't even printing. Then I saw some very tiny lines on the tape and realized that it actually was printing. This is my first time buying this brand of filament, and I bought it because I've seen some very strongly positive reviews from this brand. I'll update this review as I go through the roll, and I'll see if it's a worthwhile investment. I'm printing with an unheated bed, blue painter's tape, and at 220 degrees Celsius.Will give one more star if it deserves it.

While this works I have had some issues with consistent prints on this filament. Perhaps with more adjustments and fine tuning it will be better. The color is very light blue. Pictures make it seem darker but it's actually light sky blue.

Prints great on my Creality CR-10