1. Before using your MAGIC HOSE place the rubber washer firmly inside the female coupling. This will prevent leaking. When using the MAGIC HOSE for the first time, it is recommended to first fill and extend hose and slightly stretch hose to release tightness in outer folded material covering. Then release water and refill to use normally. 2. Attach the female end of the MAGIC HOSE to the water source. 3. Attach the supplied on/off valve to the male end of the MAGIC HOSE. 4. Turn the on/off valve to the OFF position. 5. Turn the water on at the source. Gradually increase the water pressure. The MAGIC HOSE will automatically expand up to 3 times its original length. 6. When the MAGIC HOSE is fully expanded turn the on/off valve to the ON position. You can now use the MAGIC HOSE like any ordinary hose. 7. When you are finished using the MAGIC HOSE, turn the water OFF at the source spigot. 8. Allow the water in the MAGIC HOSE to drain by turning the on/off valve to the 0N position. If you are using a nozzle then open the nozzle. As the water begins drain, the MAGIC HOSE, it will automatically contract back to its original length. IMPORTANT: This hose is intended for routine watering applications. Do not run hot water through this hose . Do not leave the water turned ON and the hose under Pressure when not in use. . Drain your hose in the summer when you are not using it and keep it shaded as much as possible. . Protect your hose from harsh winter weather by Storing it in doors. Be sure to drain the hose completely before storage as water remaining in the hose Can freeze, damaging the hose.
Trustpilot
3 weeks ago
4 days ago
