Dupli-Color EBNS06017 Perfect Match Automotive Spray Paint - Nissan Silver Metallic, K23-8 oz. Aerosol Can

The color match is on point. I respected the chrome factory grill shroud on my ‘15 Toyota Tacoma to match the Magnetic Gray Metallic and it came out fantastic. I used a black primer base, not sure if it would have mattered if I used gray but regardless it’s an excellent match for a ~$19 rattle can. I then finished it with SprayMax 2k clear coat. I went a little heavy with that hence the slight orange peel texture, but its not noticeable u less you’re 1 foot away and the angle of the light hits it perfectly. I 100% recommend this paint!

WORKED GREAT, GREAT MATCH

Gather 'round, children, and let me tell you a tale of reasonable car restoration. In 2021 your boy was working two jobs: one a day role managing operations for a marketing agency for 8 hours, and the other as a dishwasher for a restaurant for the next 8 hours. In addition there was a 45 minute drive each way from where I live to the restaurant and back. So we are talking long hours. I slept maybe 4 or 5 hours a night. I had taken the restaurant job in an emergency situation (hey, 30K a year ain't bad when nothing else is coming in) and was sticking with it while I was feeling the agency job out. So I was working 16 hours a day, in the summer heat, 5 or 6 days a week. Friday night, well Saturday morning, really, I got off the restaurant job after many sweaty hours (no cooling in that back of house!). I had parked my 2004 Camry in a hotel gararge a block away and was giving a less fortunate fellow employee a ride home. As we got into the car, which was parked next to a massive rectangular pillar, your boy was blathering away at his aquaintance. My Chatty Cathy mode was in full effect. Putting the car in reverse without paying attention at all, I scraped along the pillar with the passenger side door. I don't drink or do drugs. I'm a good driver and don't have any points on my license. But the fact is that I was basically intoxicated after several months of 16 hour days with physical labor and little sleep night after night. I would never have done this under normal circumstances. I would have carefully looked around and checked before starting to drive, especially in reverse. But now my car was deeply scraped and dented, with orange undercoat glaring along that door. Ick. A few weeks later I quit the restaurant job. Now I was dating and man that bunch of digs and scrapes was embarassing! Calling around to some shops, I found their pricing to fill and repair or replace with a junkyard door was way out of proportion to the value of the vehicle--a quarter of the blue book price. No way! I thought I was stuck with the ugly orange reminder forever. In the spring of 2023 I started looking for options. What can I say, I am both busy and slow. Enter this paint. I bought a can and sprayed it on. I was not professional. I did it outside, in my driveway, in the wind, without any PPE. This was an improvement, but I learned about this can. It * did * clog and sputter. It * was * hard to apply with just my finger. I got a lot of drip down the door and thought it was me. But I've ran a metal fab shop and know how to apply spraypaint, so what gives? Maybe that I could hang or sit the object down for better angles, and I can't do that with the door? So the door was say 20% improved with this first pair of coats. You could still see a small bit of the orange, and somehow some purple, though. I waited a year, then got brave again. How about I learn, and this time get a respirator, a snap on spray handle that you squeeze with your whole hand instead of one finger, and another can of paint and try again? This spring, 2024, I tried again. The sun went in and out of clouds and pissed me off with the constant change of light and heat. The wind kicked up. I had taped the door off this time and still got some on the windows. The surface ended up kind of matte, a bit rough for my taste...but overall the experience was much improved. I got two coats out of this can, then snapped the above photo to send to a friend who has seen the car in person many times over the past several years. "Holy cow!" he said. "That is so much better!" He reminded me the purpose of this kind of work is to make your car or whatever look 8% better. It doesn't need to be a masterpiece. He has been holding off improving his own car because of expecting and knowing he'll be disappointed by wanting a 50% improvement. Look--this is say 3 or 4 coats total. I haven't put clearcoat on it. Since May 2024 it has stood up to spring storms, heavy rain, hail, long trips back and forth from North Carolina to Virginia. We'll see in a year or so if it needs further coats or what (remember, I am busy and slow). If you're waiting on making an improvement to your car, and the listing says the color will match, it will well enough. Don't expect perfection but do expect visible improvement. Invest in $30-50 of other supplies like the respirator (mine was $17) and the clip on handle (around $8) and you'll get good results. For what I invested I feel this is a valuable and worthwhile improvement. I hope this was entertaining and informative for you.

I used it to cover up a large bunch of deep scratches on a back door. Maybe wasn't the best method to use here. Paint color is close, but not a perfect match. In the sun you can tell more. It has clear coat applied as well in the picture. 2003 Honda CRV.

As luck would have it I have two Tornado Red VW Beetles. In the pictures the front fender of the convertible is Duplicolor with Spraymax 2K over it. On the old Beetle the rear fender is the same. Red fades and never seems to match but this paint is really really close for less than $20 per can.

Great Clear Coat for DIY Automotive Projects I used this Dupli-Color Perfect Match Clear Coat after repainting parts on my 2010 Jeep Wrangler Sahara JKU, and it provided a nice, glossy finish that really completed the job. The can arrived quickly and well packaged with no dents or leaks. It sprayed evenly with a consistent fan pattern, making it easy to apply several light coats without runs. Once cured, it added good depth and shine while helping protect the base coat. The finish looks smooth and has held up well so far. As with any paint project, proper prep and following the recommended flash times between coats makes a big difference in the final results. For the price, this is an excellent option for touch-ups, trim pieces, or small automotive projects. I’d definitely keep a can on hand for future repairs. ⭐⭐⭐⭐⭐ Easy to apply, great finish, and an excellent value for DIY automotive painting.

Received a wrong color. This product is not returnable. It might be good quality, but a canister of paint that doesn’t match the color of my car is completely useless to me. $16 wasted.

EDIT: I got this can to work by soaking it in warm water for ten minutes, and then cleaning out the nozzle with a tiny wire--I stripped the plastic from a baggie tie to get at the tiny wire in it and used that. Now it works well. I keep the can soaking in warm water between coats. I've added one star to bring it up to four stars. You shouldn't need to go through that trouble to get a rattle can to work, but it's not that big a deal, and I do like the paint quality and color match, as well as the spray quality once you get it working. Original review: I bought 2 cans at local auto parts stores, they were perfect--sprayed nicely, got smooth coats that were excellent matches for my white Ram truck (paint code PW7), and the cans sprayed nicely right to the last drops in the can (judging by how light the can was at the end). The 3rd can came from Amazon, and it was a complete fail. I got about 20 seconds of splattery spray from it, then it just shot out globs for another 20 seconds, then it stopped putting out any paint completely. Lots of shaking the can (which feels completely full, ball clangs around in there as it should), cleaned out the nozzle with mineral spirits, nothing helped.

Love this Oxford White YZ spray paint! I removed the rusty, faded bed liner on the lower sides of my 13 F150 and repainted it. I did three coats per side, and it blends perfectly with the original factory paint. Pro tip: let the cans sit in warm water beforehand for a beautifully smooth spray, and wipe the nozzle occasionally while working. I bought 4 cans it’s pricey but worth it

Works great!

un peu plus foncé que la couleur d'Origine si tu y mets plusieurs couches

good match

yup