Andonstar AD246S-M HDMI Digital Microscope - 2000x, 3 Lens 2160P UHD Video Record, 7 Inch LCD Soldering Microscope

Great little microscope for the price. Good magnification on the display. Hdmi output to my 55" tv worked great. The hdmi output from the microscope to the TV is 1920x1080 not 4k which was a shame but can't complain & the 7" display is also 1920x1080. The 4k @24fps is ie video recordings. I tested it using lens L looking at a 0201 resistor which is 0.6mm x 0.3mm.

The most important thing with using a microscope for soldering is getting a decent zoom while still being able to get a soldering iron underneath and this is known as the working distance. The long distance lens which comes with this set is very good as you can see from the first two photos. Plenty of room to work and very usable magnification. Fully lowered there is much less room but still usable. As with all of this type of microscope you loose depth perception and don't have so much control over the positioning which can be an issue with larger objects. However it is much cheaper than a stereo microscope with a boom arm which is what you would otherwise need

Excellent microscope if you want high magnification. I struggled to get the magnification down to the level I need for working on watches - but that was because the focal lengths printed on the lenses fooled me. I assumed that the focal length they quote is as per telescope eye pieces, short-length = high magnification. The opposite is true for these, so I was working with the highest power lens. Only 4 stars because when all is said and done it is a modest resolution, slow speed, basic digital camera on a stand with a couple of lenses - so at £170, not a cheap camera. But if it is what you need, it is robust and effective.

Just what I needed for smd work, easy set-up and easy to use, even comes with a mem card of which I nearly discarded with the box - be careful. Great piece of kit.

I'd highly recommend this microscope. With the three lenses it has versatility. I use mine with the L lens for close up PCB work. It has a great working range and has the ability to stream through the HDMI port at the same time as viewing the work piece on the 7" screen. Ideal for viewing on a bigger screen. The picture quality of the built in screen is very good compared to other microscopes. The image quality from the camera sensor is also impressive. Thr are a few things to bear in mind though. The UHD resolution along with it's 1080p 60fps capability is for recording on to the SD card only and not the output resolution of the HDMI port or via USB. Also it's not a true 4K resolution as the aspect ratio at that setting is 4:3 and not 16:9. And if you wonder what the 3.5mm jack socket is for, which is sometimes hidden under a QC sticker, it's for an optional endoscope camera. Overall I would definitely recommend this microscope over others. You won't be disappointed.

This is an excellent Microscope. I'm using it for soldering SMD components and it really helps. It came with everything you need to get started with it. Has various swappable lenses for different levels of magnification (from close to mega-close!). It actually comes with some slides that contain stuff you can look at under this microscope. You can snapshot, record what you're looking at on the screen. You can even plug in a second HDMI display. I plugged a bigger screen in and it works perfectly. Long story short, this was a fantastic buy at a very reasonable price and comes with everything you should need to get Microscoping (if that is a word!) Rob :D

Just what I expected really good microscope for children and adults wish it had Bluetooth so I could get the photos to my iPad easier so I had to order a micro Sim adapter as well. Overall, the build quality is sturdy and the lcd screen is excellent. The buttons can be difficult to be seen use the remote it’s easier. The different microscope attachments are very good and was easy to set up.

but if I knew when I bought it what I know now I wouldn't have bought it.. This has been said before but the stand is really not that good, it's a bit restricted in movement but quite sturdy. An aquaintance has a different model but on his model the lenses are different, with his you can use lenses from other manufacturers and I assumed being the same brand this would be the same. My aquaintance has switched in an aftermarket wide angle lens for working on larger objects like pc motherboards. This one has a different l;ens system, in Adonstars words after I asked them "Hi. The bottom side of the lenses need to have specific threaded holes to install the screws to assemble the lens to the microscope, these are unique to Andonstar and cannot be used with other lenses" If I had known that before buying I would not have bought this. I am now restricted to the three plastic lenses they supplied with the scope. This should be made clear on the sales page. Very disapointed, the lenses provided are really not very good, the picture is good enough but I am now restricted to these lenses when I would have liked a wide angle lens for the same reason my aquaintance has one to enable work on larger items plus I intended to buy a better quality lens. I am replacing the stand with a boom from microphones to enable completely free movement but so disapointed about the lens. I don't understand why they would restrict these devices in this way. EDIT - Still annoyed about the lens not being able to be replaced with standard lenses but looking into a way to have an adapter 3D printed, anyway decided to make the best of what I had. THe stand that comes with this microscope is really restrictive with no real movement which is just about useable with miniature pcb's but when it comes to something bigger say a PC motherboard it really is a problem. To get around this issue I have removed the stand and added a Microphone boom arm. An idea I had seen talked about on some forums. Anyway I had some success and you can see the results in my pics. I can now move the scope around very easily and because of the way these boom arms work the scope always retains the same aspect relative to the work bench. I can almost cover the whole bench with it. The circular light leaves no shadow meaning a perfect view all of the time. Very pleased with the results.

Motsvarade helt mina önskemål, snabb leverans! Ett fantastiskt mikroskop med 3 olika objektiv. Klar och tydlig bild, lätt att ställa in fokus. Kan även koppas till TV eller datorn. Bra belysning som kan ställas in i olika positioner. Fick den levererad direkt till dörren. Skall användas till kretskort och lödning men även andra uppdrag väntar då den är lätt att använda.

I don’t write many reviews, but for this product I feel like I should. I solder 0402 components and it’s a PITA to use a normal magnifying glass, so I started looking around for electronic ones. I was on the fence about buying one, especially at this price point because I didn’t know how good it would be. I was surprised by the quality of the microscope. The picture quality is amazing. Setting it up is simple, just a few screws, didn’t really need the instructions. The entire thing is stable, I’ve bumped into it while maneuvering around it and it barely moves. The helping hand lights are incredibly bright and light up whatever PCB you’re working on. I like the fact that it comes with an SD card for pictures and videos. One thing I wish it came with were actual helping hands. Not a fan of the tabs to hold down a board. I’m sure this can be an add on with another Amazon product. Overall if you’re on the fence about buying this, don’t be. Just buy it, really good product for the money. Might even be worth it to buy it’s big brother, with the ESD pad and helping hands for a few more bucks.

Een heel mooi apparaat voor de gevraagde prijs. Het is natuurlijk niet bedoeld voor professioneel gebruik. Maar voor de semiprofessional. Je kunt er prachtig gedetailleerde foto's mee maken, die je vervolgens op de bijgeleverde sd-kaart kunt opslaan. Het is tevens mogelijk om op dezelfde manier te filmen. Ik heb zo al een printplaat (pcb) kunnen repareren, door de smd componenten optisch te vinden, die kapot waren en met het blote oog gewoon ok leken. Ik zal deze scoop met name gebruiken voor soldeer en desoldeer hulp, en ben daarom blij dat de afstand tot de printplaat en het objectief voldoende groot kan zijn, om meetpunten, soldeergereedschap enz ruim onder het objectief te kunnen gebruiken. Met bijgeleverde petridishes(?!) kun je tevens flink kleinere objecten bekijken van microscopische omvang. Deze glazen plaatjes bevatten enkele objecten, die je zichtbaar kunt maken via een meegeleverde onderliggende led verlichting. Ik heb een foto gemaakt vanaf mn beeldscherm met mn smartphone om een idee te geven. ( Anders had ik de sd-kaart uit het systeem moeten halen en op een pc moeten uitlezen 😁 Ik ben ook erg blij met de hdmi aansluiting, waarmee je ook het beeld direct op een monitor kunt plaatsen.

Das Andonstar AD246S-M ist echt ein cooles Teil, wenn du auf der Suche nach einem digitalen Mikroskop bist, das dir ein scharfes Bild liefert und dabei super leicht zu bedienen ist. Egal, ob du Elektronik reparierst, Münzen sammelst oder einfach nur gerne kleine Details anschaust – dieses Mikroskop macht richtig Spaß. Design und Handhabung Was sofort auffällt, ist der 7-Zoll-Bildschirm. Der ist schön groß und zeigt dir die vergrößerten Objekte in super scharfer Qualität. Du musst also nicht die ganze Zeit durch ein Okular gucken, sondern hast das Bild direkt vor dir. Das Mikroskop steht stabil auf einem robusten Standfuß, sodass nichts wackelt, wenn du fein arbeiten musst. Der Aufbau ist schnell erledigt, und die Bedienung ist wirklich intuitiv – auch für Leute, die keine Technikprofis sind. Bildqualität und Vergrößerung Die Bildqualität ist echt top! Mit bis zu 1000-facher Vergrößerung kannst du wirklich winzige Details sehen, die du mit bloßem Auge niemals entdecken würdest. Egal, ob du an Elektronikbauteilen arbeitest oder dir die Struktur von Blättern und Insekten anschaust, du bekommst ein klares, detailreiches Bild. Wenn du willst, kannst du das Ganze sogar per HDMI auf einen größeren Bildschirm übertragen – perfekt, wenn du anderen was zeigen willst. Funktion und Vielseitigkeit Das Mikroskop kommt auch mit einer Foto- und Videoaufnahmefunktion, sodass du alles festhalten kannst, was du untersuchst. Ideal, wenn du Ergebnisse speichern oder teilen willst. Die integrierten LED-Leuchten sind auch ziemlich praktisch, denn sie sorgen dafür, dass dein Objekt immer gut ausgeleuchtet ist, selbst bei schlechten Lichtverhältnissen. Das Mikroskop ist vielseitig und eignet sich für alle möglichen Anwendungen – von der Elektronik über Schmuck bis hin zu biologischen Proben. Preis-Leistung Für das, was das Andonstar AD246S-M bietet, ist der Preis echt in Ordnung. Klar, es gibt teurere Modelle mit noch mehr Funktionen, aber für den Heimgebrauch oder Hobbyforscher ist dieses Mikroskop absolut ausreichend. Du bekommst ein gestochen scharfes Bild, einfache Bedienung und alles, was du brauchst, um direkt loszulegen. Fazit Wenn du ein digitales Mikroskop suchst, das leicht zu bedienen ist, eine super Bildqualität bietet und dazu noch einen großen Bildschirm hat, dann ist das Andonstar AD246S-M eine richtig gute Wahl. Egal, ob du für dein Hobby oder für kleine Reparaturen ein Mikroskop brauchst – mit diesem Teil machst du nichts falsch. Echt empfehlenswert!

El microscopio se nos entrega en una caja muy bien protegido contra posibles golpes. Se entrega semidesmontado, solo has de colocar unas pocas piezas que lo haces mirando una guía rápida que se incluye o si eres menos hábil, puedes descargar unos videos escaneando unos códigos BIDI que se incluyen en el manual. El microscopio es una verdadera pasada, no sé porque he esperado tanto tiempo ha comprarlo y he seguido usando una lupa con luz para mis trabajos en electrónica. Con este microscopio, es la noche y el día, lo que antes me costaba Dios y ayuda soldar/desoldar ahora en unos segundos está realizado. Dispones de tres lentes diferentes para tres usos distintos, desde lo que es trabajos de electrónica, pasando por mirar hoja, monedas hasta otra lente para poder observan esas cosas tan pequeñas como son las alas de un insecto o sus dientes. Todo un mundo en miniatura por descubrir. Su manejo es sencillisimo, con un enfoque muy preciso y las luces que tiene a ambos lados hacen un trabajo inigualable. Para poder sujetar los PCN dispone de unas pestañas para atrápelas o bien giras todo lo que es el microscopio menos la base y sigues trabajando con el en tu mesa de silicona térmica. Puedes sacar fotos o grabar video. Tambien disonéis de una salida HDM para que lo puedas conectar a un monitor, con las pulgadas que tu quieras, y te aseguro que se ve de lujo. Trae una tarjeta microSD para guardar los videos o fotos, os he dejado alguna capturas hechas con él. Tambien dispone de un zoom digital 3X y apenas mete ruido. Una maravilla, de verdad. De verdad, tanto si eres aficionado a la microelectrónicas, fotografía macro, entusiasta de los sellos/monedas, o de todo lo que el ojo no ve, no lo dudes, compra este microscopio que no te vas a arrepentir. Yo he tardado mucho tiempo en dar el paso y ahora me arrepiento de no haberlo dado muchísimo antes. Un microscopio 💯 recomendado. Espero que esta reseña te haya sido útil