MantelMount - MM700 Premier Fireplace TV Mount Pull Down Bracket for 50"-90" & 25-115 lb Televisions Above Mantel with Sound Bar Attachment, Paintable Covers & Safety Pull Down Handles

We had been wanting to eliminate the TV credenza taking up floor space in our family room, but were reluctant to mount the TV above the fireplace. The reason being that we have 9-ft ceilings and the mantle and hearth are higher than most. This would require mounting the TV at a height that would be awkward and uncomfortable to watch.Then I discovered the Mantle Mount and thought it presented great possibilities for solving our problem.It was, admittedly, a bit difficult to mount, as we have a brick hearth that extends all the way to the ceiling, meaning that I had to find and install anchors into the brick with sufficient strenght to support the load from the TV extended out from the surface, and the mount itself. Fortunately, I'm pretty capable at this sort of home construction activity, and was able to drill into the brick and install the right anchors.We've had it in place for at least a year or more, and have had zero problems with it. We love the fact that we can pull it down to watch TV at a comfortable height--even when the gas fireplace is turned on--and simply push it back up when we're done.I would highly recommend Mantle Mount, but make sure you have someone who is qualified to install it, or include the cost of hiring someone into your budget.

This tv mount provides all the options I was looking for: tilt up/down, turning left/right and vertical positioning. The mount comes with 4 lag bolts to screw into studs which makes it very sturdy. I could not use all 4 lag bolts because I had a single stud in the middle of the wall. I could only use two lag bolts but that was an allowed configuration in the instructions. The mount can hold up to a 90”, 115 lb TV and has hydraulic piston to maintain the position of the TV. I like the possibility of upgrading to a bigger, heavier TV without needing to get a new mount. I thought the installation was easy and the instructions were clear. Definitely read the instructions, take measurements and find your studs before you start drilling into studs. The arm is kinda heavy, but that’s understandable since you need steel to hold +100 lb TV. Once we hung the TV on the arm, it was pretty easy to secure and adjust the hydraulic piston assistance. Yes, it cost more than $400, but I would rather spend the money on a quality mount than find my TV broken on the floor and my wall messed up because I was too cheap.

We just had it installed on brick. Works great. We love it. Like the way it pulls down

This mount easily handles my 65" HDTV and allows up/down movement without fear of it breaking or falling off the wall. The assembly and installation were pretty typical for a large TV mount. Neither too complicated nor really easy. Follow the instructions and it will work. Mounting a wide soundbar required a little DIY engineering, but there are additional kits for that sold by the manufacturer. For the price, they should be included.One thing you must pre-plan for is cabling location. Most home-builders seem to install the electrical receptacles and cable/internet receptacles perfectly centered, in exactly the spot one would mount a TV. This is has been true for me in multiple houses, over the fireplace mantel and on bedroom walls.The wall mounting plate is large and sturdy and the pivot mechanism is mounted to it in the center (only). While the mounting plate has big cut-outs for your cabling on either side of center, you are out of luck if your outlets are *exactly* where you need to mount the TV. You get a little wiggle room vertically, depending on how you mount the rails to the back of the TV, but not the 6-8" required to clear the outlets. You will be faced with the choice of mounting the TV in a non-ideal location or re-running your power, video, and ethernet cables.So, if you are sure you are going to choose this mount, make sure you or your builder/installer puts the outlets ~10" right or left of the center of where your mount will attach to the wall. I had to re-run my power cable through my AV conduit - not ideal.I really like the mount, but because the center section is solid, the cables were way more work than I had anticipated.

It took my wife and I four hours to install. So like many other reviews state, be ready to spend time installing. Instructions could be improved if hardware packet numbers didn't have inconsistencies with the instructions and if the instructions stated the allen wrench or socket size for each step.Adjusting the tension, one of the last steps, is really hard. You're gonna feel like you're doing it wrong or that it isn't working, but eventually the tension adjusts and your tv can stay lowered without the safety bolt. It's a 1/2" socket.It definitely pulls the TV off the wall a good bit, which is great if you have a deep mantle, but not ideal if your mantle is less than 8" deep.The TV is further away from the wall when in the up position, than I would prefer.Overall, it works great, is very substantial, does what is says it does and you can't see the mount when the TV is in the up position.

Purchased this for my 75 inch TCL OLED. Looks awesome. It' is sturdy and it works very well in terms of making it easy to bring the TV out and down past the mantel. Really upgraded my living room because previously we had the TV in a weird spot because it was so big. I mounted it into the brick fireplace w/ concrete sleeve anchors (lag shield). Rock solid. Glad I bought the MM700 because my TV weighs 80 lbs. The only difficulty was that the soundbar wings did not fit my soundbar. Luckily I was able to modify the horizontal brace by drilling an extra hole and that made it work. With some ingenuity you will do the same. I was impressed with the customer service. I called in with a question, left a VM, and they called me back within 30 mins. They were polite and professional. Love the product.

This is an excellent product! Well designed and though out, with very good documentation and unexpectedly good quality. That said, don't expect setup to be quick and easy. There is some inherent head-scratching that must be dealt with in any project of this type. Calculating exactly how high to place the wall mounting hardware depends on many issues and measurements. Take it slow and plan to get it right the first time. Use a calculator and double check!I had an extra-large sound bar, so I had to fashion custom parts from black metal plates. (I did order the SBXL component, but then decided to use a custom setup while waiting for the SBXL.) I also would up 3-D printing support block to further support the Sound Bar using the handles. A simple wood block would have worked, but maybe not quite as well (my 3-D printed version has lips on all sides to keep the block in place).My components are in a separate cabinet 8 feet from the mount (last pic that I uploaded, which for some reason is on its side). Routing the cables was reasonably straightforward, but I could imagine a cleaner setup that uses a cable wrap or some such. There are a few tools that you might not have that are pretty important - like an extender for a socket wrench (pretty much required unless you want to risk losing an arm).Oh, and when they say something is a "two person job" ... they mean it! You'll *need* a helper for a few minutes at one or two places in the project.

I relied on the online fitment guide, but after installation there is about 1/4 inch of side-to-side play when adjusting the TV. This doesn’t feel secure and raises concerns about the mount’s ability to safely hold the TV. Based on my experience, the fitment guidance may not be accurate, so I would not recommend this product without verifying compatibility very carefully.

MUY RECOMENDABLE SI TIENES LA TV ENCIMA DE LA CHIMENEA Y QUIERES BAJAR SU ALTURA. HEMOS RECIBIDO EL PRODUCTO EN TIEMPO Y EL MONTAJE HA SIDO SENCILLO Y HA QUEDADO PERFECTO. SE VE MUY SÓLIDO Y LAS PRUEBAS ESTAN SIENDO GENIALES, EN ESTABILIDAD Y FACILIDAD. ESPERAMOS QUE CON EL TIEMPO SE MANTENGAN LOS MUELLES EN BUEN ESTADO Y SIGAMOS TENIENDO ESTA BUENA VALORACIÓN.

Works good, feels a little wobbly when moving the tv, it’s definitely sturdy but they could have used thicker mounting brackets that attach to the TV.Other than that I’m happy with it. Only thing you have to watch for is how far out your mantle comes, mine is 16 inches so we had to mount the TV almost to the ceiling so the arm could extend all the way down. We just keep it down all the way.75” 85lb TV mounted

Great product

I'm looking at a mount that right now is having my TV hit the ceiling. Follow the instructions at your peril. I meticulously followed the instructions and each measurement, drilled massive holes in my wall and after 5 hours of construction the TV hit the ceiling which it should have been 1.75" away from it. I was able to lower the TV by an inch while it was up by shifting the brackets on the back of the TV, not "officially supported but the only way to do it without redrilling holes as they offer now actual vertical adjustment option, and it still hit the ceiling. So 2.75" off, no vertical adjustment provided other than start again from square one. Brutal design. Several errors and inconsistencies in the instructions do not help. For example, 2.1 says" measure...to the bottom of the TV/sound bar". The image on the left has the measurement going to the bottom of the TV (but not the handle which also has to clear the mantel) whereas the image on the right has it going way below the handle. 2.2 and 2.4 say to use the "lower wall plate holes" however both images clearly show to the bottom of the bracket and not the holes. A $75 Ikea shelf has better instructions than this. I'll decide tomorrow whether to package the hole thing up and return it (painful) or go through the hassle of removing it and then guessing how much lower it needs to go (also painful).