Fit 2012-2016 Subaru Impreza & 2015-2021 WRX STI Trunk Spoiler Painted #D4S

3 years later this wing was my first mod I got on my Wrx and let me just say this is literally the best sti replica wing for a VA wrx of all time the thing is 100% paint matched it’s like they literally took it from the Subaru factory and the paint is so clean and it’s impossible to get a chip in this wing and imma support this company forever when it comes to Subaru because this wing I think everybody who wants a sti wing on their wrx this one is the best this is a phenomenal 10/10🔥🔥🔥

The spoiler came fast and it has all the items individually wrapped. Had all the instructions and good hardware. Came with foam and mounting tape. Match my paint perfectly (WR Pearl Blue). I mounted the spoiler on a 2020 WRX Limited in case you are wondering if it will fit your car.

You get what you pay for. The wing came in scratched and damaged. On top of that they did not provide me with double sided tape, I should of have checked before drilling holes in my trunk. How ever after installing it, the wing was still shaking I HAD TO DRILL 2 EXTRA HOLES to keep it sturdy. i HIGHLY recommend purchasing an original one from factory. Stay blessed.

5/19/20 Edit: Two years later and the wing is in great shape as is the paint. I’m adding a photo I found in my notes of what was on the instructions that came for supplies that I used as a guide. Also adding a photo of the yellow zinc M6x6 bolts that came with the wing I decided not to use, vs the serrated flange hex bolts I used instead (I went with silver stainless on all bolts instead of the two black bolts). Also adding a recent photo. The weather strip tape I mentioned below does keep water out of the wing and trunk. I will note I later added blue threadlocker on the bolts because they kept needing to be re-tightened. Be careful not to over tighten the bolts however, because you CAN bend/bow the trunk metal in underneath the wing base, and or it might be possible to pop the embedded nut inside the wing from the plastic from holding the bolt(s).Paint matches perfect. Wish the screw plate covers on the underside on the sides came painted; they are dark colored/black.The drilling/trunk template it came with was accurate (measured to make sure before drilling holes). The hardware they sent didn’t match what was mentioned for “supplies needed” on the template instructions (instructions were very vague and general - I watched a video by SubieShakedown of how to mount it instead). Was also missing the mentioned “sponge gasket” and double-sided tape. I just bought weather sealing tape and lined the bottom of the wing and inside where the screw covers go. Seems to be working to keep it protected from rain or any water from getting in.They sent all 6mm serrated hex flange bolts with washers and four self tapping screws. I instead bought two 16mm and two 25mm flange bolts for the attachment of the wing to the trunk, since I didn’t want to trust tiny 6mm screws to hold on the wing while driving at high speeds... Required some custom drilling of the wing’s screw holes which were plugged up with plastic in order to get the longer bolts all the way in. Also the 25mm bolts helped with reaching through the two holes going through double walls in the trunk...We drilled small pilot holes in the trunk first and finished up with a 7/32” drill bit designed for metal, which was a better fit for the screws than 1/4” would’ve been as in the video we watched. The instructions didn’t mention what size hole to drill.All in all, once we got it on there I’m happy with it. Have had it on about a month. It’s held up so far going at highway speeds and faster (75+ mph) and driving with moderate to strong winds.

Spoiler match 100% with the paint of the car, it came with everything you need to install even the template. great product thanks.

It looks great but I'm missing bolts, instructions, and double sided tape.

K7X blue pearl REALLY MACH!!

This wing was perfect. Properly shipped and paint was 100% would highly recommend. Just need to order the sponge and 3m which is a few bucks no big deal.