JDiction UV Resin, Upgrade 300g High Viscosity Hard UV Resin with Crystal Clear Resins Kit for Doming, Sealing, Coating, and Casting

Better than Bondic because: Much stronger than bondic. It dries clear. Bondic is like an amber crappy color. This creates a much stronger, harder to break seal. It's cheaper It comes with WAY MORE resin. Like WAYYYYY more if you've used bondic you know what a pain their applicators can be. Bondic applicators gets difficult to apply as they start to empty. But the precise tip is needed sometimes) So i even filled up my empty-ish bondic applicators. (I mixed the two because who cares? I sure don't but if there's any issues, I'll come back and update this... actually i probably won't. I have no doubt it'll work fine. They're both uv resin) The tip of this product allows for much more coverage (be cautious of over applying. Apply a little, cure it quickly, then apply another layer, cure it, on so on) Otherwise this stuff will come pouring out. Have your UV light ready (with bondic too! Any uv resin) just have it ready. And make sure you don't accidentally shine your UV light on the applicator as you attempt to cure each layer. (I did this with bondic at least 10 times. I would apply some and aim the uv light, then attempt to apply again before i moved the light, or accidentally just held the light on the exposed tip. It sucks.) I use this for fixing things, not making jewlry. Sometimes if i have to glue something that is difficult to hold until the glue dries (just as an example, an arm on a vinyl figure.) I'll cover the surfaces (that I'm going to bond) with the glue, and then add uv resin around the edges (of course it ends up mixing with the glue but so far that has not caused an issue) This way i can cure the resin and set the item down as the glue cures. (I'm impatient and there's nothing worse than trying to hold two tiny surfaces together that keeps slipping. It's maddening) This method makes works every time so far. It's awesome Then you can peel or pick at any resin that globbed up from the surfaces if needed without disturbing the glue bond (hopefully. Be careful) I'm very pleasantly surprised with this product. It's interesting that bondic used an inferior, weaker bonding resin, with an ugly color, and a crappy applicator... the creator said he had the idea because he's a dentist and uses uv resin for teeth. 🙄 uv resin has been around for years and I'm pretty sure he wasn't the first person to use it to fix something THIS IS NOT A GLUE. YOU CANNOT GLUE WITH THIS. THIS. IS. NOT. A. GLUE... for crying out loud people. And if you need to bridge a gap between the two surfaces, make a quick tiny "string" from one side to the other, cure it fast before the "string" collapses then add another "string". Cure and then you should have a foundation you can use to hold up more resin. Just build up tiny layers. And extend the uv resin further past the two surfaces. The bond works better with more surface to grab. If you use this as a glue, then you deserve what will happen. Simply use this to hold the surfaces that have glue. It's that simple No need for pictures. It's a resin.

This UV resin is probably the best I’ve ever used. I work a lot with regular epoxy and UV resin. I mixed a little glitter in it and put it in one of my molds. I used my UV lamp at 38 watts for 60 seconds each side. As you can see it’s fully cured with no tackiness. And NO BUBBLES! Not one. The price can’t be beat either. I will defintely be using this resin from now on. Very pleased with this purchase.

I use UV resin in many resin projects. This UV resin is great! Seals well. Consistency is perfect. No leakage. Hardens well under a UV lamp. Nice clear results in my project. No yellowing over time so far as can be when using UV resin I recommend this UV resin.

I use this on all my crafts! Does leak if cap gets cracked or is not wiped clean. Quantity is good for quality. Is clear when dry. Dries extremely hard and quickly with UV.

Update: The seller contacted me and sent free resin for my troubles. They had fantastic customer service and genuinely seemed to care about my experience using their product. That being said, I did retry it using it for only small projects like shrinky dink sealer, earrings, book marks, etc. This product works very well if done in thin layers and on smaller molds. (I’m still hesitant to try it in larger, deeper molds such as thick keychains. It is still bendy and takes a multiple minutes to cure completely.) I have now tried it with glitter mixed in and had no extra problems with it. Overall: I would definitely recommend it for any small resin project and would purchase again. >>>>>>>> previous post <<<<<<<<< I’m new(ish) to UV resin and with that being said, I can’t get this to cure completely. Out from under the light, it’s super tacky and flexible. I tried a few resin hacks to eliminate the tackiness but it was still bendy. In the end, I had to cure in straight sun light for several hours. The product did turn out very nicely in the end. Very clear. BUT for the trouble I had to go through to get it there, I wouldn’t want to use it again. (I’ve used at least 3 different resin brands and this is the only one I’ve had trouble with. Perhaps I used it wrong, I don’t know…)

The JDiction UV Resin is an excellent choice for crafters looking for a thick, crystal-clear resin for doming, sealing, and coating projects. Its high-viscosity formula flows slowly for precise application, cures to a hard, glossy finish, and resists yellowing over time. Easy to use with minimal odor, this resin is perfect for jewelry making, DIY crafts, and detailed resin art projects.

This resin is, by far, the best I have used! It came out beautifully clear in the mold I tried it with! Absolutely will be buying again!

Really high quality UV resin, no stickiness if you cure it correctly. It's very clear, hard and high gloss once cured, which works perfectly for coating polymer clay charms. For me it cures in about 2 minutes, but often with the first cure there is a bit of oxygen inhibition so I cure for another 2 minutes in a clear plastic cup of water. the bottles are full, and it seems to be of good value for the price.

This resin is very nice. It’s reasonably thick so it’s nice for doming but it also pours and flows well into complex silicon molds with not much encouragement. I’ve tinted it with resin pigment and mica powder (too much mica will make the curing time longer but it does eventually cure) and am very happy with the results. It only takes a few minutes under the uv lamp to get a nice clear glossy finish that is very hard and durable, and seems to have very minimal shrinkage. Also fairly inoffensive odour (I do wear a mask anyway) and no smell when cured. Can recommend! (Edit - I’ve now tried a few other resins and this is the only one that cures up completely in a few minutes without any residue or stickiness! Love it and will definitely buy more.

This resin is great ... the seller maybe not so much! I seem to be on the 20 day prime delivery program!! Very disappointing service!

Cures well, doesn’t drip off edges so easy to work with. Things my 3rd purchase of the same

Read that this brand is good and decided to give it a shot. Works well so far! Cures nicely and very glossy.

This is my first time using a UV resin, I have created a key chain. It cured hard and very clear using UV light. Just follow the instructions provided by the product. I got a bit sensitive of the fumes. So please wear a respirator. Don't know if it is my sensitivity or the product's fume. However the outcome is excellent and I do recommend it for Jewellery making. If u make a thick piece it might be a bit soft in the center when it is hot but not sticky. Just don't worry it will fully harden when it cools. I left my piece for 1 day for reassurance (because of my low experience) All in all I loved this product.