JENOLITE Primer Filler Spray Paint (GREY) | 3 x 500ml | High Fill Multi-Surface Primer Paint | Fills Small Dents & Scratches | Perfect For Car Bodywork, 3D Printer Models & More

If you’re like me and tend to look at dents and scratches as a daunting task, then this JENOLITE Primer Filler Spray might just change your mind. I was genuinely impressed with how well it worked on my 3D prints made on my Bambu Lab printer. It filled in those small annoying layer lines and imperfections, making the surface look smooth and ready for painting. It’s almost like putting on a filter in real life, smoothing out all those little flaws that used to bug me. The high-fill formula really makes a difference; it works wonders on metal and even plastics, providing excellent coverage. The spray can format is also incredibly easy to use. I’m no spray paint expert, but the nozzle provided a nice, even spray, and I didn’t have any of the dreaded splatters or drips. It feels like they designed this for people who might be using primer for the first time. The coverage was smooth, and the white finish makes it easy to see where you’ve applied it. The drying time is reasonable too. After an hour or so, I was able to sand it down without issue, and it sanded super easily to give a nice even surface. It really does make a difference in prepping the surface before the final paint, especially on 3D printed parts where getting a smooth finish can be challenging. Plus, it adheres well to multiple surfaces, metal, wood, plastic, you name it. I even tried it on a piece of garden furniture that had seen better days, and it did a great job prepping it for a fresh coat of paint. If you need a primer that fills small dents and gives a professional-looking finish without a lot of hassle, JENOLITE is a solid choice. It’s like giving your DIY projects a smooth makeover without the stress

This primer filler spray paint is fantastic! The grey, high fill formula goes on smoothly and covers imperfections really well, leaving a uniform surface ready for topcoat. It adheres beautifully to multiple surfaces-metal, wood, and even plastics - making it extremely versatile. I was impressed with how easy it is to apply, and the finish dries evenly without drips or streaks. It sands down nicely too, which is perfect for achieving a flawless professional look. This primer has definitely made my painting projects quicker and more efficient, and I’ll be using it again for all my future DIY and repair jobs. Highly recommended!

Perfectly sealed and covered the filler I put on my car bumper. Easy to use, blended really well with good coverage. Great product! Haven't tested durability as its only been on a few days at the time of writing this but has held up in constant rain and mud so far, so seems durable. Great value for money, saved me hundreds in bodywork repair costs! (Product wasn't fully dry when I took the photos but the finish was even ans seamless after it dried). Blended perfectly into my plastic bumper.

I have a second hand B&D alligator saw. The previous owner had cut down the lead to 1m and had cut through that and patched it with tape. So whilst replacing that I decided on a full restoration job. The blade back (picture 4) had lost all it's paint and was quite rusty. So I decided to de-rust the item and re-spray it yellow. Originally it was sprayed grey but I though yellow would be better. My neighbours often borrow my saw for lopping tree branches. So I though yellow's easier to see in a tree canopy and therefore a desirable safety improvement. So I ordered this paint, de-rusted the part with brass wire wheels and cleaned off twice with alcohol wipes. Then i sprayed outside on a nice sunny day before hanging the item to flash off in a warm greenhouse (picture 1). I'm no stranger to rattle cans. Prep is key and key is key. A rattle can trigger handle (pic 5) makes the job easier. You can concentrate on your spray pattern & technique without fighting the can. This paint is very good. Flashed off quickly, probably more quickly than the suggested 30 mins, but I gave it an hour between coats. Picture 4 shows the results after 2 coats. It's enough. What I like about this paint is the viscosity is bang right for a primer. Not too thin, not to thick. It's easy to get a flat result with primers, even bog standard stuff from High St motor shops. However, if it's too viscose, it builds too fast and you can lose details. This paint is 'in the zone'. It covered nicely and uniformly but the spot weld hollows are still visible. I've only given it a 4 star as the jury's out on the colour. It's supposed to be yellow. It is yellow-ish in pic 2 when it was freshly painted but had dulled to a mustard colour in pics 3 & 4 when fully dry. Still, it kind of looks like a 'tool colour'. Tomorrow I top coat with Jenolite Canary Yellow. I'm hoping for a JCB or DeWALT yellow. Edit 11/10/21: So I sprayed 4 coats of Jenolite Canary Yellow topcoat on this afternoon and it's definitely a proper yellow (pic3). Again it came out first class.

My third purchase of Jenolite primer..

This is a very high quality primer which produces and excellent base for the top coat .

Ace ❤️ Got the tin warm and product loosened up and boy is this good 👍🏻 Filled the surface imperfections of the filler I had rubbed down perfectly. Light compound sand top coat on 👍🏻 A great DIY result from a trusted maker Used their Rust Converter also A+

Good product if you can keep unblocking the nozzle. The nozzle on the can had no hole to begin with so had to fiddle about to open one up, then as spraying it kept blocking. It would have been great if the supplier provided a couple of spare nozzles with the can.

Rien a dire produit conforme au descriptif et résultat impeccable

il costo è elevato, ma le prestazioni lo sono altrettanto. spray preciso, nessun gocciolamento. se spruzzato alla distanza corretta asciuga perfettamente e velocemente. l'ho usato per delle ruote in metallo per un tavolino, pulite con alcool per sgrassarle, con l'idea di passare dello smalto dopo. invece la satinatura del primer è così bella che l'ho tenuto così (e quindi sono rientrato del costo dello smalto) pensavo che si sarebbe scrostato subito vista la lega delle ruote. Invece ce l'ho da 3 anni ed è ancora perfetto. l'ho riacquistato per verniciare su metallo cromato, aggiornerò la recensione coi dettagli se regge.

Täcker bra (3D modeller).

Funkar kanon

Produit conforme à mes attentes. Bon recouvrement.